| video_uri |
video URI |
|
| video_type |
video type: video/mp4 |
|
| text |
information message |
|
| at |
Access network. 1-Ethernet 2-WIFI 3-2G |
|
| mt |
Media Type. 1-live view 2-playback 3-audio 4-file transmission 5-serial transmission |
|
| ch |
Media channel. starting from 1, 0 means no need for the channel. |
|
| mb |
mobile phone number |
|
| dt |
Device Type |
|
| ver |
Current version of device |
|
| ap |
The hotspot when MDVR connects to the sever in WiFi mode. |
|
| fuel_cons |
Fuel consumption |
|
| balance_fuel |
Balance fuel |
|
| mobile_net |
Mobile network. 0--unknown 1--normal 2--abnormal 3—not exist |
|
| gps_module |
GPS location module. 0--unknown 1--normal 2--abnormal 3—not exist |
|
| wifi_module |
WIFI module. 0--unknown 1--normal 2--abnormal 3—not exist |
|
| gsensor_status |
GSensor status. 0--unknown 1--normal 2--abnormal 3—not exist |
|
| recording_status |
Bit0 - channel 1 is recording
Bit1 - channel 2 is recording
Bit2 - channel 3 is recording
Bit3 - channel 4 is recording
Bit4 - channel 5 is recording
etc.
|
|
| status1 |
bit0 - ACC (0-invalid,
1-valid)
bit1-break (0-invalid, 1-valid)
bit2 - turn left (0-invalid,
1-valid)
bit3 - turn right (0-invaid,
1-valid)
bit4 - forward (0-invalid, 1-valid)
bit5 - backword (0-invalid,
1-valid)
bit6 - left front door (0-Close,
1-Open)
bit7 - right front door (0-close,
1-Open)
|
|
| status2 |
bit0 - left
mid door (0-close, 1-open)
bit1 - right
mid door(0-close, 1-open)
bit2 - left
back door(0-close, 1-open)
bit3 - right
back door(0-close, 1-open)
|
|
| x_accel |
GSensor acceleration, X axis |
g |
| y_accel |
GSensor acceleration, Y axis |
g |
| z_accel |
GSensor acceleration, Z axis |
g |
| gsensor_tilt |
GSensor tilt |
g |
| gsensor_impact |
GSensor impact |
g |
| position_accuracy |
Positioning accuracy |
m |
| location_type |
Location type. 0—location invalid; 1--GPS; 2--BD; 3--Glonass; 4--AGPS; 5--base station location; 6 - WIFI |
|
| mob_signal |
Mobile signal
intensity |
|
| mob_net_type |
Mobile network type:
0 - unknown
3 - 2G
4 - 3G
5 - 4G
6 - 5G
|
|
| wifi_signal |
Wi-Fi signal
intensity |
|
| wifi_net_addr |
Wi-Fi network address |
|
| wifi_gateway |
Wi-Fi gateway address |
|
| wifi_subnet |
Wi-Fi subnet mask |
|
| ssid |
Wi-Fi ssid |
|
| hdN_status |
Hard
disk N (disk index) status:
0 - unknown
1 - recording
2 - idle
3 - abnormal
4 - full
|
|
| hdN_size |
Hard disk N (disk index) size |
Mega Bytes |
| hdN_capacity |
Hard disk N (disk index) balance
capacity |
Mega Bytes |
| alarms |
Alarm
status:
bit0—video
loss (0: data invalid, 1: data valid)
bit1—motion
detection (0: data invalid, 1: data valid)
bit2—video
blind (0: data invalid, 1: data valid)
bit3—alarm
input trigger(0: data invalid, 1: data valid)
bit4—over
speed alarm (0: no trigger, 1: trigger)
bit5—low
speed alarm (0: no trigger, 1: trigger)
bit6—emergency
alarm (0: no trigger, 1: trigger)
bit7—over
time stop (0: no trigger, 1: trigger)
bit8—vibration
alarm (0: no trigger, 1: trigger)
bit9—out
of GEO fencing alarm (0: no trigger, 1: trigger)
bit10—enter
GEO fencing alarm (0: no trigger, 1: trigger)
bit11—exist
line alarm (0: no trigger, 1: trigger)
bit12-enter
line alarm (0: no trigger, 1: trigger)
bit13—fuel
level alarm (0: no trigger, 1: trigger)
|
|
| video_loss |
bit0 - channel 1 video loss indicator (0: no video loss, 1: video loss)
bit1 - channel 2 video loss indicator (0: no video loss, 1: video loss)
bit2 - channel 3 video loss indicator (0: no video loss, 1: video loss)
etc.
|
|
| motion |
Motion
detection:
bit0 - channel 1
bit1 - channel 2
etc.
|
|
| video_blind |
Video blind:
bit0 - channel 1
bit1 - channel 2
etc.
|
|
| alarm_inputs |
Alarm
inputs triggered:
bit0 - input 1
bit1 - input 2
etc.
|
|
| in_veh_temp |
Temperature in vehicle |
|
| out_veh_temp |
Temperature outside of vehicle |
|
| motor_temp |
Motor temperature |
|
| device_temp |
Device temperature |
|
| in_veh_hum |
Humidity in vehicle |
|
| out_veh_hum |
Humidity outside of vehicle |
|
| alarm_ec |
Event
type code:
0 - unknown
1 - video lost
2 - motion detection
3 - video blind
4 - input trigger
5 - emergency alarm
6 - low speed alarm
7 - over speed alarm
8 - low temperature alarm
9 - high temperature alarm
10 - humidity alarm
11 - parking over time
12 - acceleration alarm
13 - GEO fencing
14 - electronic route
15 - abnormal openclose the door
16 - storage abnormal
17 - fatigue driving
18 - fuel consumption abnormal
19 - illegal ACC
20 - GPS module abnormal
21 - front panel open
22 - Swipe card
|
|
| alarm_st |
Event start time |
|
| alarm_et |
Event end time |
|
| device_tm |
Event device time |
|
| swipe_card |
Swipe card number |
|
| sc_up |
Swipe card information. Onboard/offboard:
1 — Onboard
(check in)
2 — Off
board (check out)
Else — invalid
|
|
| sc_ht |
Swipe card information. History:
1 — Historical
data
2 — Real time data
Else — invalid
|
|
