| param_id_# |
Parameter value
|
|
| event_# |
Event
|
|
| alarm_flag |
Bit0 Emergency
alarm, triggered after touching the alarm switch An alarm occurs when
the status bit is 1. Alarm definition: SOS alarm
Bit1 Overspeed alarm An alarm occurs when the status bit is 1. Alarm definition: Overspeed alarm
Bit7
Terminal main power supply undervoltage An alarm occurs when the status
bit is 1. Alarm definition: Main power undervoltage alarm
Bit8 Terminal main power supply fails An alarm occurs when the status bit is 1. Alarm definition: Main power failure alarm
Bit16 Vibration alarm An alarm occurs when the status bit is 1. Alarm definition: Vibration alarm
Bit28 Illegal displacement alarm An alarm occurs when the status bit is 1.Alarm definition：Illegal displacement alarm
|
|
| state_flag |
Status: Bit0: 0: ACC off; 1: ACC on Bit1: 0: Not positioning; 1: Positioning Bit2: 0: North latitude; 1: South latitude Bit3: 0: East longitude; 1: West longitude Bit7: 0: Disarmed state; 1: Armed stat Bit10: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect Bit11: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect Bit16: 0: Vehicle door unlocked; 1: Vehicle door locked
|
|
| odometer |
Odometer
|
|
| fuel_volume |
Fuel volume
|
|
| speed_drvng_rec |
Speed driving rec
|
|
| alarm_event_id |
Alarm event ID
|
|
| overspeed_alarm |
Overspeed alarm
|
|
| position_type |
Position type
|
|
| section_id |
Section ID
|
|
| route_alarm |
Route alarm
|
|
| direction |
Direction
|
|
| driving_time_alarm |
Driving time alarm
|
|
| driving_time |
Driving time
|
|
| driving_results |
Driving results
|
|
| memory_fault_alarm |
Memory fault alarm status (Bits 1-16), bit1-bit12 respectively indicate the 1~12 main memory, bit13-bit16 respectively indicate the 1~4 disaster recovery storage devices, and the corresponding bit is 1 means the memory is faulty.
|
|
| abnormal_driving_alarm |
Abnormal driving alarm (Bits 1-16) Bit1：fatigue; Bit2：call; Bit3：smoking;
|
|
| veh_signal_status |
Veh. signal status
|
|
| user_msg |
User mesage
|
|
| veh_stat |
Vehicle status, the same as state_flag
|
|
| info_id |
Additional information ID - 0x64 - driving assist warning information
- 0x65 - driver behavior monitoring function warning information
- 0x70 - violent driving warning information
- 0x14 - Video-related alarm
- 0x15 - Video signal loss alarm
- 0x16 - Video signal blockage alarm
- 0x17 - Memory fault alarm
- 0x18 -Driving behavior alarm
|
|
| alm_time |
Alarm time threshold
|
sec |
| alm_thre1 |
Warning threshold 1 When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.
|
|
| alm_thre2 |
Warning threshold 2 This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.
|
|
| workstate |
Workstate, 0x01: normal work 0x02: standby mode 0x03: Upgrade maintenance 0x04: Device is abnormal 0x10: Disconnect
|
|
| alarm_status |
Alarm status, bits(1-32) Bitwise setting: 0 means no, 1 means yes bit1: cameraabnormal bit2: Main memory exception bit3: Auxiliary memory exception bit4: Infrared fill light is abnormal bit5: abnormal speaker bit6: Abnormal battery bit7~bit10:reserved bit11: Communication module error bit12: The positioning module is abnormal bit13~bit32:reserved
|
|
| alm_lvl |
Warning level: - 0x01: Level 1 warning
- 0x02: Level 2 warning
|
|
| alm_id |
According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.
|
|
| sign_stat |
Sign status. - 0x00: Not available
- 0x01: Start sign
- 0x02: End sign
This field is only applicable to warnings or events with start and end sign types.
|
|
| veh_ah_spd |
Leading vehicle speed. Range: 0~250, valid only when warning types are 0x01 and 0x02, and fill in 0x00 when not available.
|
km/h |
| veh_ah_dst |
Leading car/pedestrian distance
|
|
| dev_type |
Deviation type: - 0x01: Left deviation
- 0x02: Right deviation
- Only valid when warning type is 0x02, fill in 0x00 when unavailable.
|
|
| road_sign_t |
Road sign type - 0x01: Speed limit sign
- 0x02: Height limit sign
- 0x03: Weight limit sign
- Only valid when warning types are 0x06 and 0x10; fill in 0x00 when not available.
|
|
| road_sign_d |
Road sign data. Data identified on road signs, fill in 0x00 when unavailable.
|
|
| fat_deg |
Fatigue degree. Range 1~10. The larger the value, the more severe the fatigue. Only valid when warning type is 0x01, fill in 0x00 when unavailable. |
|
| iccid |
SIM Card ICCID Number
|
|
| pwr_ext |
External
voltage
|
V |
| pwr_int |
Internal power
|
V |
