Totem Tech - AT07

Alarm code Status

Bit 32: Panic button. (1=SOS, 0= without SOS)

Bit 31: ACC IN1 (1= ignition ON, 0= ignition OFF)

Bit 30: Over speed (1= over speed, 0= without over speed)

Bit 29: External power (1= with supply power, 0= without supply power)

Bit 28: GEO fence(out) (1=out alarm, 0= none out alarm)

Bit 27: GEO fence(in) (1= GEO in alarm, 0= without in alarm)

Bit 26: GPS antenna drop (1= GPS antenna drop alarm, 0= GPS antenna is ok)

Bit 25: GPS module error (1= module error, 0= GPS module is ok)

Bit 24: Output1 (1= digital output1 in high level, 0= digital output1 in low level)

Bit 23: Output2 (1= digital output2 in high level, 0= digital output2 in low level)

Bit 22: Output3 (1= digital output3 in high level, 0= digital output3 in low level)

Bit 21: IN2 (digital input 2) (1= digital intput2 has been triggered, 0= digital input2 without triggering)

Bit 20: IN4 (digital input 4) (1= digital intput4 has been triggered, 0= digital input4 without triggering)

Bit 19: Shocking (1= shocking alarm, 0= without shocking). Status will show ‘1’ if it’s in shocking even shock alarm has been disabled.

Bit 18: Idle (1= Idle speed alarm, 0= without idle speed)

Bit 17: Inner battery in low level (1= inner battery voltage is low, 0= inner battery voltage is ok)

Bit 16: Unauthorized Driving (1= Unauthorized driving, 0 = without unauthorized driving)

Bit 15: GPS status (1= GPS fixed, 0= No GPS fixed)

Bit 14: Inner batter in charging (1= battery charge, 0= batter not charging)