Topflytech Pioneerx 100

Topflytech Pioneerx 100
Производитель: TOPFLYTECH Co., Limited
Обсуждение на форуме

Количество объектов

3590
Онлайн
5591
Всего
Особенности Topflytech Pioneerx 100:
  • 2G
  • 4G/LTE
  • Наличие черного ящика
  • BLE
  • Встроенный одометр
Поддержано в Wialon:
  • Акселерометр
  • Аналоговые датчики
  • Управляющие команды по GPRS
  • Цифровые датчики
  • Связь через TCP
  • Связь через UDP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Topflytech Pioneerx 100 в диалоге настроек объекта, укажите следующие данные :

Тип устройства: Topflytech Pioneerx 100
Уникальный ID: imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Topflytech Pioneerx 100 для использования его в Wialon Hosting :

Порт сервера: 22469

Всего в серверном центре Wialon используется 5591 объектов Topflytech Pioneerx 100 — это составляет 0.22% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра Описание Единицы измерения
sf_vers

Software version of the hardware

fw_vers

Firmware version of the hardware

platform

Platform version of the hardware

hw_vers

Hardware version

acc_on

Ignition ON Upload Interval

seconds
acc_off

Ignition OFF Upload Interval

seconds
angle

Angle Upload Interval

degrees
distance

Distance upload interval

m
gps_data

Bitwise variable, in which each bit means following:

  1. Bit7=0, realtime data; Bit7=1, history data
  2. Bit6=0, LBS data; Bit6=1, GNSS data
  3. Bit5=0, GNSS is in working mode. Bit5=1, GNSS is in sleeping mode
  4. Bit4~Bit0, locked satellite count

speed_alarm

Over speed alarm setting

km\h
gsensor

Bitwise variable in which each bit means following:

  1. Bit7~Bit4, total 16 different gsensor sensitivity for move.
  2. Bit3~Bit0, show 4 managers status (set or not)
  3. Value=1, manger is set; Value=0, manager is null

heartbeat_int

Sending interval of heartbeat package

minutes
relay

Relay status, which is bitwise variable

  • Bit7 (command type received):
    • 0: device received the engine recover command
    • 1: device received the engine cut command
  • Bit6 (engine cut execution status):
    • 0: engine cut failed because gps not fix or speed more than 20 km\h
    • 1: engine cut ok
  • Bit 5 & Bit4 (rly mode):
    • 00: rlymode = 0
    • 10: rlymode = 1
    • 01: rlymode = 2
    • 11: rlymode = 3~255
  • Bit3~Bit 0 (buld in alarm SMS language):
    • 0: Chinese
    • 1: English
    • 2: French
    • 3: Spanish
    • 4: German
    • 5: Portuguese
    • 6: Arabic
    • 7: Indonesian
    • 8: Russain
    • 9: Turkish

drag_alarm

Bitwise variable, each byte means following:

1.Bit15~Bit0. The range is 0~65535
2. Value(Bit15~Bit0)=0, the drag alarm is disabled
3. Once the alarm is set and enabled, when device detected the ignition status changed from ON to OFF, the alarm will automatically become effective.


1wire_device_type

Device Type indicates the type of the 1-wire device. It currently supports below 1-wire device types:

0: 1-Wire RFID Reader
1: iButton Reader
40: Temp Sensor
46: Temp & Humi Sensor

hdop Horizontal Dilution of Precision, is a metric in GPS that indicates the accuracy of your horizontal (latitude and longitude) position, based on the geometric arrangement of satellites in the sky
I/O

Input/output state. See Wialon documentation to calculate each i/o state

ext_pwr_volt

External power voltage

V
adcN

Analog-to-Digital Converter value. N - is the number of ADC's channel

int_bat_volt

Internal battery voltage

V
device_battery_type

Device battery type

device_int_temp

Device internal temperature

battery

Battery level

%
speed

The speed of a vehicle

jamming_detection_and_control_setting

The value of jamming detection and control setting

alert_setting The value of alert setting
network_proto_setting

The value of network protocol setting

Bit 7: TCP
Bit 6: UDP
Bit 5: MQTT
Bits 3-2: IP
Bits 2-1: Connection type:

  • 00: Long connection
  • 10: Long and short connection
  • 01: Short connection


manager_phone_number_setting

The value of manager phone number setting

ignition_off_upload_interval

Ignition OFF
Upload Interval
(Second)

sec
ignition_on_upload_interval

Ignition ON
Upload Interval
(Second)

sec
angle_upload_interval

Upload interval when vehicle turns every certain degrees

Unit: Degrees
Value range:

  • Value=0, disabled
  • Value=[15-180]

Degree
distance_upload_interval

Distance Upload Interval
(Meter)

Meters
network_signal

Network signal strength

network_status

Network status bitwise variable:

Bit 7: SIM card status
Bit 6: Network status
Bit 4: PDP activation status
Bits 3-0: Socket status

gps_status

Bitwise variable in which each bit means following

Bit 7: Working status
0: GNSS not working
1: GNSS working

Bit 6: GPS whether enabled
Bit 5: GLONASS whether enabled
Bit 4: Galileo whether enabled
Bit 3: Beidou whether enabled
0: disabled
1: enabled
Bit 2: Whether the positioning was successful
Bit 1: Whether the positioning point is a historical point

relay_status

Bitwise variable in which each bit means following

Bit 7:
0, device received the engine recover command
1, device received the engine cut command
Bit 6:
0, enginee cut failed because gps not fix or speed more than 20KM/H
1, engine cut OK
Bit 5 & Bit 4:
value=00, rlymode=0;
value=10, rlymode=1;
value=01, rlymode=2;
value=11, rlymode=3~255#;(3-255 unit is minute)

device_status

Bitwise variable:

Bit 15: Ignition status
Bit 14: Idle status
Bit 13: External power connection status
Bit 12: USB connection status
Bit 11: Solar charging status
Bit 10: Smart upload mode enabled

odometer

The odometer value

meter
towing_alarm_threshold

Towing Alarm Threshold

Range: 0~65535
Unit is meter

meters
fms#N

FMS data value, #N - is a value number

speeding_threshold

Speeding Threshold

km/h
accdet_setting

ACCDET Setting: 0 - off, 1- on

locktrack_sim_apn_setting

LOCKTRACK/SIM/APN Setting

Bit 7: Locktrack setting status
Bit 6: Locksim setting status
Bit 5: Lockapn setting status

0=disabled, 1=enabled

alert_sms_setting

Alert SMS Setting. Send alert SMS
0x01 = Yes
0x00 = No

heartbeat_setting

Heartbeat Setting

Range: 0~65535
Unit: minute

minutes
ign_source

Ignition source identification:

  • value=0, the ignition voltage is greater than 13.5.
  • value=1, OBD reports 010A ignition after vibration.
  • value=2, read the data change of OBD after vibration and ignition. value=3, after the voltage value is greater than the learned value, pull up the OBD and report the 010A ignition ((accdet=2))
  • value=4, after the voltage value is greater than the learned voltage value, pull up the OBD and read the OBD data change ignition (accdet=2)
  • Value=5, greater than the set voltage value to identify ignition.
  • value=6, set vibration recognition ignition (accdet>0)

mileage_source

Mileage source code

alarm_code

Alarm code 0x**:


1. =1, Device removed alarm
(triggered by back light sensor)
(VS alarm 21)
2. =2, Rear cover open alarm
(VS alarm 22)
3. =3, SOS alarm
4. =4, Front light detected
(triggered by front light sensor)
(VS alarm 23)
5. =5, Start falling alarm (VS alarm 24)
6.=6, Low battery alarm (Vs alarm 7)
7.=7, Battery recovered alarm
8. =8, Device high temperature alarm
(VS alarm 25)
9. =9, Vibration start alarm (VS alarm 26)
10. =10, Collision alarm (VS alarm 27)
11. =11, Tilt start alarm (VS alarm 28)
12. =12, USB cable connected alarm
(VS alarm 13)
13. =13, USB cable disconnected alarm
14. =14, Enter geofence alarm (VS alarm 15)
15. =15, Leave geofence alarm
16. =16, Start moving alarm (VS alarm 17)
17.=17, Stop moving alarm
18.=18, Idle start alarm (VS alarm 19)
19.=19, Idle stop alarm
20.=20, Power on (via function button)
21.=21, Device mounted alarm
(triggered by back light sensor)
22.=22, Rear cover close alarm
23. =23, Front light disappear alarm
24.=24, Stop falling
25. =25, Device high temperature disappear
26.=26, Vibration stop alarm
27.=27, Collision stopped alarm
28.=28, Tilt recovered alarm
29.=29, Power off (via function button)
30.=30. Device low temperature alarm
(VS alarm 31)
31.=31. Device low temperature disappear
32.=32. short stop alarm
66.=66. Jamming alarm
67.=67. Jamming alarm disappear
70.=70. high speed alarm
71.=71. high speed alarm disappear
72.=72. drag alarm
74.=74. google alarm
77.=77. drag stopped alarm
78.=78. authorized alarm
79.=79. unauthorized alarm


Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике