Персональный GPS трекер Gosafe G737P | Интегрирован с Wialon

Особенности Gosafe G737P:

3G
4G/LTE
Наличие черного ящика
Часы (браслет)

Поддержано в Wialon:

Управляющие команды по GPRS
Отправка данных по SMS
Управляющие команды по SMS
Связь через TCP
Связь через UDP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Gosafe G737P в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Gosafe G737P
Уникальный ID:	serial

Укажите следующие параметры в конфигурационной программе или в конфигурации Gosafe G737P для использования его в Wialon Hosting :

Порт сервера:

21978

Всего в серверном центре Wialon используется 419 объектов Gosafe G737P — это составляет 2.09% от общего количества устройств в категории «Персональные трекеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
bat_volt	Device voltage	V
cidN	The identifier of GSM base station N
device_status	Device status. Each bit represents one kind of event
dtt_event_status	DTT data event status
event_id	Event ID event_id value - meaning (event_status value description) 0 - Rest (0 - Moving; 1 - Rest) 1 - GSM anti jamming (0 - Normal; 1 - jamming) 2 - Geofence (0 - Normal, 1 - Geo-fence alarm) 3 - GPS TFTF (0 - NULL, 1 - Enable) 4 - Fiber disconnected (0 - Connect, 1 - Disconnect) 5 - SOS (0 - NULL, 1 - Enable) 8 - Device low voltage (0 - Normal, 1 - Low Voltage) 9 - Device under voltage (0 - Normal, 2 - Under Voltage) 10 - iBeacon (0 - Exit, 1 - Enter) 12 - Balance notice (0 - NULL, 1 - Balance Notification) 13 - Body gesture (0 - Stand, 1 - Lying down) 14 - Charging (0 - Not Charging, 1 - Charging) 15 - Health check event (0 - NULL, 1 - Report health info)
event_status	Event status identifier Can be 0 or 1 the meaning of the value depends on the parameter event_id
geo_fence	Geofence number that is triggered
geo_fenceM_N	Number M to N Geofences status. Each bit represents each Geofence, bit 0 to bit N-M+1 represents Geofence M to Geofence N. 0 - outside Geofence or there is no Geofence assigned to device, 1 - inside Geofence
geo_local_tm	Local time when Geofence event is triggered
geo_speed	Speed when Geofence event is triggered	km/h
geo_status	Bit field. Bit0: 1 - over speed, 0 - speed is normal. Bit1: 1 - inside Geofence, 0 - outside Geofence
gps_fix	GPS fix. 1 - fixed, 0 - not fixed
gsm_level	Signal strength, range is 0 to 5
lacN	The zone code of GSM base station N
mccN	Mobile country code (base station N)
mncN	Mobile network code (base station N)
pwr_int	Backup battery voltage	Volt
reg_status	GSM registration status
rssiN	Signal strength (base station N)	dBm
tagN	Tag ID of tag N
T_tag_entering	ID of the tag that triggered TAG entering event. T - tag type (h - home tag, p - prison tag)
T_tag_leaving	ID of the tag that triggered TAG leaving event. T - tag type (h - home tag, p - prison tag)
fw	Firmware version
hw	Hardware version
dev_name	Device name
hdop	Horizontal Dilution of Precision

Имя параметра

Описание

Единицы измерения

bat_volt

Device voltage

cidN

The identifier of GSM base station N

device_status

Device status. Each bit represents one kind of event

dtt_event_status

DTT data event status

event_id

Event ID
event_id value - meaning (event_status value description)
0 - Rest (0 - Moving; 1 - Rest)
1 - GSM anti jamming (0 - Normal; 1 - jamming)
2 - Geofence (0 - Normal, 1 - Geo-fence alarm)
3 - GPS TFTF (0 - NULL, 1 - Enable)
4 - Fiber disconnected (0 - Connect, 1 - Disconnect)
5 - SOS (0 - NULL, 1 - Enable)
8 - Device low voltage (0 - Normal, 1 - Low Voltage)
9 - Device under voltage (0 - Normal, 2 - Under Voltage)
10 - iBeacon (0 - Exit, 1 - Enter)
12 - Balance notice (0 - NULL, 1 - Balance Notification)
13 - Body gesture (0 - Stand, 1 - Lying down)
14 - Charging (0 - Not Charging, 1 - Charging)
15 - Health check event (0 - NULL, 1 - Report health info)

event_status

Event status identifier
Can be 0 or 1 the meaning of the value depends on the parameter event_id

geo_fence

Geofence number that is triggered

geo_fenceM_N

Number M to N Geofences status. Each bit represents each Geofence, bit 0 to bit N-M+1 represents Geofence M to Geofence N. 0 - outside Geofence or there is no Geofence assigned to device, 1 - inside Geofence

geo_local_tm

Local time when Geofence event is triggered

geo_speed

Speed when Geofence event is triggered

km/h

geo_status

Bit field. Bit0: 1 - over speed, 0 - speed is normal. Bit1: 1 - inside Geofence, 0 - outside Geofence

gps_fix

GPS fix. 1 - fixed, 0 - not fixed

gsm_level

Signal strength, range is 0 to 5

lacN

The zone code of GSM base station N

mccN

Mobile country code (base station N)

mncN

Mobile network code (base station N)

pwr_int

Backup battery voltage

Volt

reg_status

GSM registration status

rssiN

Signal strength (base station N)

dBm

tagN

Tag ID of tag N

T_tag_entering

ID of the tag that triggered TAG entering event. T - tag type (h - home tag, p - prison tag)

T_tag_leaving

ID of the tag that triggered TAG leaving event. T - tag type (h - home tag, p - prison tag)

Firmware version

Hardware version

dev_name

Device name

hdop

Horizontal Dilution of Precision

Заполните заявку для начала работы с Wialon

Нишевые продукты для решения точечных задач

Gosafe G737P

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Станьте партнером

Закажите Wialon в вашем регионе

Заполните заявку для начала работы с Wialon