Localizador GPS personal Gosafe G737P

Características Gosafe G737P:

3G
4G/LTE
Caja negra
Reloj de pulsera

Soportado en Wialon:

Gestión remota vía GPRS
Envío de datos por SMS
Gestión remota vía SMS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de Gosafe G737P en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	Gosafe G737P
ID único:	serial

Indique los siguientes parámetros en el programa de configuración o en la configuración Gosafe G737P para utilizarlos en Wialon Hosting :

Puerto del servidor:

21978

En el centro de servicio Wialon se utilizan 421 unidades Gosafe G737P — es 2.08% de la cantidad total de dispositivos Personal conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
bat_volt	Device voltage	V
cidN	The identifier of GSM base station N
device_status	Device status. Each bit represents one kind of event
dtt_event_status	DTT data event status
event_id	Event ID event_id value - meaning (event_status value description) 0 - Rest (0 - Moving; 1 - Rest) 1 - GSM anti jamming (0 - Normal; 1 - jamming) 2 - Geofence (0 - Normal, 1 - Geo-fence alarm) 3 - GPS TFTF (0 - NULL, 1 - Enable) 4 - Fiber disconnected (0 - Connect, 1 - Disconnect) 5 - SOS (0 - NULL, 1 - Enable) 8 - Device low voltage (0 - Normal, 1 - Low Voltage) 9 - Device under voltage (0 - Normal, 2 - Under Voltage) 10 - iBeacon (0 - Exit, 1 - Enter) 12 - Balance notice (0 - NULL, 1 - Balance Notification) 13 - Body gesture (0 - Stand, 1 - Lying down) 14 - Charging (0 - Not Charging, 1 - Charging) 15 - Health check event (0 - NULL, 1 - Report health info)
event_status	Event status identifier Can be 0 or 1 the meaning of the value depends on the parameter event_id
geo_fence	Geofence number that is triggered
geo_fenceM_N	Number M to N Geofences status. Each bit represents each Geofence, bit 0 to bit N-M+1 represents Geofence M to Geofence N. 0 - outside Geofence or there is no Geofence assigned to device, 1 - inside Geofence
geo_local_tm	Local time when Geofence event is triggered
geo_speed	Speed when Geofence event is triggered	km/h
geo_status	Bit field. Bit0: 1 - over speed, 0 - speed is normal. Bit1: 1 - inside Geofence, 0 - outside Geofence
gps_fix	GPS fix. 1 - fixed, 0 - not fixed
gsm_level	Signal strength, range is 0 to 5
lacN	The zone code of GSM base station N
mccN	Mobile country code (base station N)
mncN	Mobile network code (base station N)
pwr_int	Backup battery voltage	Volt
reg_status	GSM registration status
rssiN	Signal strength (base station N)	dBm
tagN	Tag ID of tag N
T_tag_entering	ID of the tag that triggered TAG entering event. T - tag type (h - home tag, p - prison tag)
T_tag_leaving	ID of the tag that triggered TAG leaving event. T - tag type (h - home tag, p - prison tag)
fw	Firmware version
hw	Hardware version
dev_name	Device name
hdop	Horizontal Dilution of Precision

Nombre del parámetro

Descripción

Unidades de medida

bat_volt

Device voltage

cidN

The identifier of GSM base station N

device_status

Device status. Each bit represents one kind of event

dtt_event_status

DTT data event status

event_id

Event ID
event_id value - meaning (event_status value description)
0 - Rest (0 - Moving; 1 - Rest)
1 - GSM anti jamming (0 - Normal; 1 - jamming)
2 - Geofence (0 - Normal, 1 - Geo-fence alarm)
3 - GPS TFTF (0 - NULL, 1 - Enable)
4 - Fiber disconnected (0 - Connect, 1 - Disconnect)
5 - SOS (0 - NULL, 1 - Enable)
8 - Device low voltage (0 - Normal, 1 - Low Voltage)
9 - Device under voltage (0 - Normal, 2 - Under Voltage)
10 - iBeacon (0 - Exit, 1 - Enter)
12 - Balance notice (0 - NULL, 1 - Balance Notification)
13 - Body gesture (0 - Stand, 1 - Lying down)
14 - Charging (0 - Not Charging, 1 - Charging)
15 - Health check event (0 - NULL, 1 - Report health info)

event_status

Event status identifier
Can be 0 or 1 the meaning of the value depends on the parameter event_id

geo_fence

Geofence number that is triggered

geo_fenceM_N

Number M to N Geofences status. Each bit represents each Geofence, bit 0 to bit N-M+1 represents Geofence M to Geofence N. 0 - outside Geofence or there is no Geofence assigned to device, 1 - inside Geofence

geo_local_tm

Local time when Geofence event is triggered

geo_speed

Speed when Geofence event is triggered

km/h

geo_status

Bit field. Bit0: 1 - over speed, 0 - speed is normal. Bit1: 1 - inside Geofence, 0 - outside Geofence

gps_fix

GPS fix. 1 - fixed, 0 - not fixed

gsm_level

Signal strength, range is 0 to 5

lacN

The zone code of GSM base station N

mccN

Mobile country code (base station N)

mncN

Mobile network code (base station N)

pwr_int

Backup battery voltage

Volt

reg_status

GSM registration status

rssiN

Signal strength (base station N)

dBm

tagN

Tag ID of tag N

T_tag_entering

ID of the tag that triggered TAG entering event. T - tag type (h - home tag, p - prison tag)

T_tag_leaving

ID of the tag that triggered TAG leaving event. T - tag type (h - home tag, p - prison tag)

Firmware version

Hardware version

dev_name

Device name

hdop

Horizontal Dilution of Precision

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Wialon: una plataforma para todas sus necesidades

Gosafe G737P

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon