Localizador GPS de activos LL309 | Integrado con Wialon

Características LL309:

4G/LTE
Caja negra
BLE

Soportado en Wialon:

LBS
Comunicación vía TCP
Comunicación por UDP

Para que el sistema de rastreo Wialon identifique los datos de LL309 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	LL309
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración LL309 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22797

En el centro de servicio Wialon se utilizan 25 unidades LL309 — es 0.02% de la cantidad total de dispositivos Rastreador de activos conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
battery_vol	Battery Voltage
mileage	Mileage statistics
status_reg_content	Report status: Trigger content
rssi	LBS Main Cell Tower, rssi
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
gsm	GSM signal strength degree
pwr_int	Battery voltage(mV)
lac	Location Area Code
imsi	imsi number
imei	imei number
boot_reason	Boot Reason
content	the command response content
gps_time_status	GPS is Real Time or Reupload
battery	Fuel level battery value
mcc	Mobile Country Code
temp	Fuel temperature
sequence_num	Sequence Number
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
door	Door status
gsm_signal_csq	GSM Signal CSQ
status_trig_time1	Report status: Trigger time
visible_sats	Visible satellites
time	Time stamp
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
iccid	iccid number
server_flag	It refers to the data to send (by the coding format);
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
odometer	Odometer
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
hdop	HDOP
acc	ACC Status. ACC low: 0, ACC high: 1
mnc	Mobile Network Code
encoding	0X01: UTF-8 0x02: ASCII;
sats	Number of satellites
cell_id	Cell Tower ID
pwr_ext	Voltage level
sensor_percent	Fuel level in percent
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed

Nombre del parámetro

Descripción

Unidades de medida

battery_vol

Battery Voltage

mileage

Mileage statistics

status_reg_content

Report status: Trigger content

rssi

LBS Main Cell Tower, rssi

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

gsm

GSM signal strength degree

pwr_int

Battery voltage(mV)

lac

Location Area Code

imsi

imsi number

imei

imei number

boot_reason

Boot Reason

content

the command response content

gps_time_status

GPS is Real Time or Reupload

battery

Fuel level battery value

mcc

Mobile Country Code

temp

Fuel temperature

sequence_num

Sequence Number

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

door

Door status

gsm_signal_csq

GSM Signal CSQ

status_trig_time1

Report status: Trigger time

visible_sats

Visible satellites

time

Time stamp

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

iccid

iccid number

server_flag

It refers to the data to send (by the coding format);

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

odometer

Odometer

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

hdop

HDOP

acc

ACC Status. ACC low: 0, ACC high: 1

mnc

Mobile Network Code

encoding

0X01: UTF-8
0x02: ASCII;

sats

Number of satellites

cell_id

Cell Tower ID

pwr_ext

Voltage level

sensor_percent

Fuel level in percent

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

Wialon: una plataforma para todas sus necesidades

LL309

Otros dispositivos del fabricante

Haga crecer su negocio con nosotros

Conviértase en socio de Wialon

Busque a un proveedor local de Wialon