Equipo de videovigilancia JC200 | Integrado con Wialon

Características JC200:

Caja negra

Soportado en Wialon:

Transmisión en directo

Para que el sistema de rastreo Wialon identifique los datos de JC200 en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo:	JC200
ID único:	imei

Indique los siguientes parámetros en el programa de configuración o en la configuración JC200 para utilizarlos en Wialon Hosting :

Puerto del servidor:

22141

En el centro de servicio Wialon se utilizan 35 unidades JC200 — es 0.11% de la cantidad total de dispositivos Video monitoring conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro	Descripción	Unidades de medida
alarm_type	Alarm Type: 1: SOS alarm 9:displacement alarm 128: vibration alarm 129:Excess data traffic alarm 130:Device reboot 131:collision alarm 132: forward camera abnormal 133: inward camera abnormal 134:SD card can’t be identified 135:overspeed alarm 136:power off alarm 137: no inward camera 138:Enable power/oil cutoff alarm 139:Disable power/oil cutoff alarm 144: harsh acceleration alarm 145: harsh deceleration alarm 146:sharp turn alarm 147: collision alarm
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage_lvl	The range is 0~6 defining the voltage is from low to high. 0: No Power (shutdown) 1: Extremely Low Battery 2: Very Low Battery 3: Low Battery 4: Medium 5: High 6: Very High
gsm	GSM Signal Strength Levels 0: no signal; 1: extremely weak signal; 2: very weak signal; 3: good signal; 4: strong signal.
tr_status	Bitmask representing different terminal statuses. Bit7 1:Oil/Electricity cutoff 0:Oil/Electricity on Bit6 0: GPS tracking is off 1: GPS tracking is on Bit3~Bit5 Extended bit Bit2 0: Charge Off 1: Charge On Bit1 1: ACC high 0: ACC Low Bit0 0: Disarm 1:Arm
acc	1: ACC high 0: ACC Low
up_mode	Data Upload Mode: (could be only one mode available) 0 upload by time interval 1 upload by distance 2 upload for corner correction 3 upload by ACC status change 4 Re-upload last valid locating point after shift from dynamic motion to static position 5 Report last valid locating point after network reconnected. 6 Update the ephemeris to upload locating point. 7 Press to upload locating point 8 Power on to upload locating point 9 Power on and change locating point by GPS based station.

Nombre del parámetro

Descripción

Unidades de medida

alarm_type

Alarm Type:
1: SOS alarm
9:displacement alarm
128: vibration alarm
129:Excess data traffic alarm
130:Device reboot
131:collision alarm
132: forward camera abnormal
133: inward camera abnormal
134:SD card can’t be identified
135:overspeed alarm
136:power off alarm
137: no inward camera
138:Enable power/oil cutoff alarm
139:Disable power/oil cutoff alarm
144: harsh acceleration alarm
145: harsh deceleration alarm
146:sharp turn alarm
147: collision alarm

mcc

Mobile Country Code

mnc

Mobile Network Code

lac

Location Area Code

cell_id

Cell Tower ID

voltage_lvl

The range is 0~6 defining the voltage is from low to high.
0: No Power (shutdown)
1: Extremely Low Battery
2: Very Low Battery
3: Low Battery
4: Medium
5: High
6: Very High

gsm

GSM Signal Strength Levels
0: no signal;
1: extremely weak signal;
2: very weak signal;
3: good signal;
4: strong signal.

tr_status

Bitmask representing different terminal statuses.
Bit7
1:Oil/Electricity cutoff
0:Oil/Electricity on
Bit6
0: GPS tracking is off
1: GPS tracking is on
Bit3~Bit5
Extended bit
Bit2
0: Charge Off
1: Charge On
Bit1
1: ACC high
0: ACC Low
Bit0
0: Disarm
1:Arm

acc

1: ACC high
0: ACC Low

up_mode

Data Upload Mode:
(could be only one mode available)
0 upload by time interval
1 upload by distance
2 upload for corner correction
3 upload by ACC status change
4 Re-upload last valid locating point after shift from dynamic motion to static position
5 Report last valid locating point after network reconnected.
6 Update the ephemeris to upload locating point.
7 Press to upload locating point
8 Power on to upload locating point
9 Power on and change locating point by GPS based station.

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Products

Soluciones de nicho para satisfacer las tareas específicas

JC200

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Hacerse socio

Solicite Wialon en su región

Por favor, llene la solicitud para iniciar el trabajo con Wialon