JC200

Alarm Type:
1: SOS alarm
9:displacement alarm
128: vibration alarm
129:Excess data traffic alarm
130:Device reboot
131:collision alarm
132: forward camera abnormal
133: inward camera abnormal
134:SD card can’t be identified
135:overspeed alarm
136:power off alarm
137: no inward camera
138:Enable power/oil cutoff alarm
139:Disable power/oil cutoff alarm
144: harsh acceleration alarm
145: harsh deceleration alarm
146:sharp turn alarm
147: collision alarm

The range is 0~6 defining the voltage is from low to high.
0: No Power (shutdown)
1: Extremely Low Battery
2: Very Low Battery
3: Low Battery
4: Medium
5: High
6: Very High

GSM Signal Strength Levels
0: no signal;
1: extremely weak signal;
2: very weak signal;
3: good signal;
4: strong signal.

Bitmask representing different terminal statuses.
Bit7
1:Oil/Electricity cutoff
0:Oil/Electricity on
Bit6
0: GPS tracking is off
1: GPS tracking is on
Bit3~Bit5
Extended bit
Bit2
0: Charge Off
1: Charge On
Bit1
1: ACC high
0: ACC Low
Bit0
0: Disarm
1:Arm

1: ACC high
0: ACC Low

Data Upload Mode:
(could be only one mode available)
0 upload by time interval
1 upload by distance
2 upload for corner correction
3 upload by ACC status change
4 Re-upload last valid locating point after shift from dynamic motion to static position
5 Report last valid locating point after network reconnected.
6 Update the ephemeris to upload locating point.
7 Press to upload locating point
8 Power on to upload locating point
9 Power on and change locating point by GPS based station.