| alarm_hex |
Raw alarm byte, represented as hex text (e.g. "0x01"). Alarm Type List
(click to expand):
0x00=Normal;
0x01=SOS call;
0x02=Power cut alert;
0x03=Vibrating alert;
0x04=Entered fence alert;
0x05=Left fence alert;
0x06=Overspeed alert;
0x07=SIM card removal alert;
0x08=Data overage alert;
0x09=Tow/theft alert;
0x0A=Entered GPS blind spot alert;
0x0B=Left GPS blind spot alert;
0x0C=Power-on alert;
0x0D=GPS first fix alert;
0x0E=Low external power alert;
0x0F=External power low voltage protection alert;
0x10=SIM changed alert;
0x11=Power-off alert (manually powered off);
0x12=Airplane mode on alert;
0x13=Tamper alert;
0x14=Door alert;
0x15=Powered off due to low battery;
0x16=Voice control alert;
0x17=Rogue base station alert;
0x18=Cover removed alert;
0x19=Low internal battery alert;
0x1A=Exit transit mode alert;
0x1B=Suspected of leaving the herd alert;
0x1C=Door open alert;
0x1D=Door close alert;
0x1E=Airbag deployment alert;
0x1F=RPM too high;
0x20=Entered deep sleep mode alert;
0x21=Reserved;
0x22=Reserved;
0x23=Fall alert;
0x24=Charger connected alert;
0x25=Light detected alert;
0x26=Moved away from Bluetooth zone alert;
0x27=Wire cut alert;
0x28=Solicited offline (powered off) alert;
0x29=Harsh acceleration;
0x2A=Harsh left cornering alert;
0x2B=Harsh right cornering alert;
0x2C=Collision alert;
0x2D=Vehicle rollover alert -> Fall alert;
0x2E=Fall-off alert;
0x2F=Horizontal collision alert;
0x30=Harsh braking;
0x31=Left-the-herd alert;
0x32=Power-disconnected-triggered rollover alert - Tamper alert;
0x33=Locked alert/Door closing alarm;
0x34=Unlocked alert/Door opening alarm;
0x35=Illegally unlocked alert;
0x36=Unlock failed alert;
0x37=Knocking alert;
0x38=Over-distance alert;
0x39=Mute over-distance alert;
0x3A=Anklet recovered;
0x3B=Stationary alert;
0x3C=Theft alert;
0x3D=Illegally started alert;
0x3E=Key press event upload;
0x3F=Defense off alert (customized);
0x40=Defense on alert (customized);
0x41=Silenced alert (customized);
0x42=Vehicle finding alert (customized);
0x43=Trunk opened alert (customized);
0x44=RSV1 (customized);
0x45=RSV2 (customized);
0x46=RSV3 (customized);
0x47=Fatigue driving;
0x48=Pet lost alert;
0x49=Battery fully charged alert;
0x4A=Battery exception alert;
0x4B=Tilt alert;
0x4C=Harsh cornering;
0x4D=Sudden lane change;
0x4E=Vehicle stability;
0x4F=Vehicle Euler angle;
0x50=Door closed event;
0x51=Door opened event;
0x52=Body temperature exception alert;
0x53=Fuel stolen alert;
0x54=External GPS antenna disconnected alert;
0x55=Battery temperature high alert;
0x56=Charging started;
0x57=Charging stopped;
0x58=Charging complete soon;
0x59=Charging complete;
0x5A=Overcharging reminder;
0x5B=High temperature alarm;
0x5C=Low temperature alarm;
0x5D=RFID error alert;
0x5E=Pulse alert;
0x5F=Speeding in fence alert;
0x60=Phase wire alert;
0x61=Temperature sensor alert;
0x62=High external power alert;
0x63=Approaching Bluetooth alert;
0x64=Temperature exception recovered;
0x65=Violent crash damage canceled;
0x66=ADC value alert;
0x67=Logged in alert;
0x68=Logged out alert;
0x69=File upload notification;
0x70=SD card mounting;
0x71=Refill notification;
0x72=Installation alert;
0x73=Fuel level sensor timeout;
0x74=Speed alert recovered;
0x75=Fatigue driving alert dismissed;
0x76=Temperature sensor timeout;
0x77=ADC1 high voltage alert;
0x78=ADC1 low voltage alert;
0x79=Abnormal ADC1 voltage rise alert;
0x7A=Abnormal ADC1 voltage drop alert;
0x7B=Abnormal temperature rise alert;
0x7C=Abnormal temperature drop alert;
0x7D=Idling block;
0x7E=High humidity alarm;
0x7F=Low humidity alert;
0xFF=ACC OFF;
0xFE=ACC ON;
0x01BC=Changed from dark to bright;
0x01BD=Changed from bright to dark;
0x0105=Start motion reminder (stationary to moving);
0x0106=Stop motion reminder (moving to stationary).
|
|
| alarm |
Raw alarm code, converted from the protocol's hex value to a decimal integer (e.g. hex 0x01 = 1). Alarm Type List
(click to expand):
0=Normal;
1=SOS call;
2=Power cut alert;
3=Vibrating alert;
4=Entered fence alert;
5=Left fence alert;
6=Overspeed alert;
7=SIM card removal alert;
8=Data overage alert;
9=Tow/theft alert;
10=Entered GPS blind spot alert;
11=Left GPS blind spot alert;
12=Power-on alert;
13=GPS first fix alert;
14=Low external power alert;
15=External power low voltage protection alert;
16=SIM changed alert;
17=Power-off alert (manually powered off);
18=Airplane mode on alert;
19=Tamper alert;
20=Door alert;
21=Powered off due to low battery;
22=Voice control alert;
23=Rogue base station alert;
24=Cover removed alert;
25=Low internal battery alert;
26=Exit transit mode alert;
27=Suspected of leaving the herd alert;
28=Door open alert;
29=Door close alert;
30=Airbag deployment alert;
31=RPM too high;
32=Entered deep sleep mode alert;
33=Reserved;
34=Reserved;
35=Fall alert;
36=Charger connected alert;
37=Light detected alert;
38=Moved away from Bluetooth zone alert;
39=Wire cut alert;
40=Solicited offline (powered off) alert;
41=Harsh acceleration;
42=Harsh left cornering alert;
43=Harsh right cornering alert;
44=Collision alert;
45=Vehicle rollover alert -> Fall alert;
46=Fall-off alert;
47=Horizontal collision alert;
48=Harsh braking;
49=Left-the-herd alert;
50=Power-disconnected-triggered rollover alert - Tamper alert;
51=Locked alert/Door closing alarm;
52=Unlocked alert/Door opening alarm;
53=Illegally unlocked alert;
54=Unlock failed alert;
55=Knocking alert;
56=Over-distance alert;
57=Mute over-distance alert;
58=Anklet recovered;
59=Stationary alert;
60=Theft alert;
61=Illegally started alert;
62=Key press event upload;
63=Defense off alert (customized);
64=Defense on alert (customized);
65=Silenced alert (customized);
66=Vehicle finding alert (customized);
67=Trunk opened alert (customized);
68=RSV1 (customized);
69=RSV2 (customized);
70=RSV3 (customized);
71=Fatigue driving;
72=Pet lost alert;
73=Battery fully charged alert;
74=Battery exception alert;
75=Tilt alert;
76=Harsh cornering;
77=Sudden lane change;
78=Vehicle stability;
79=Vehicle Euler angle;
80=Door closed event;
81=Door opened event;
82=Body temperature exception alert;
83=Fuel stolen alert;
84=External GPS antenna disconnected alert;
85=Battery temperature high alert;
86=Charging started;
87=Charging stopped;
88=Charging complete soon;
89=Charging complete;
90=Overcharging reminder;
91=High temperature alarm;
92=Low temperature alarm;
93=RFID error alert;
94=Pulse alert;
95=Speeding in fence alert;
96=Phase wire alert;
97=Temperature sensor alert;
98=High external power alert;
99=Approaching Bluetooth alert;
100=Temperature exception recovered;
101=Violent crash damage canceled;
102=ADC value alert;
103=Logged in alert;
104=Logged out alert;
105=File upload notification;
112=SD card mounting;
113=Refill notification;
114=Installation alert;
115=Fuel level sensor timeout;
116=Speed alert recovered;
117=Fatigue driving alert dismissed;
118=Temperature sensor timeout;
119=ADC1 high voltage alert;
120=ADC1 low voltage alert;
121=Abnormal ADC1 voltage rise alert;
122=Abnormal ADC1 voltage drop alert;
123=Abnormal temperature rise alert;
124=Abnormal temperature drop alert;
125=Idling block;
126=High humidity alarm;
127=Low humidity alert;
255=ACC OFF;
254=ACC ON;
444=Changed from dark to bright;
445=Changed from bright to dark;
261=Start motion reminder (stationary to moving);
262=Stop motion reminder (moving to stationary).
|
|
| term_acc |
ACC/ignition status bit, extracted from term_info bit 1 (1=ACC ON, 0=ACC OFF). |
|
| inputs |
Digital input status bitmask. Each bit represents the state of one digital input/output line. |
|
| gps_real_up |
Flag indicating whether the GPS position is real-time or buffered/re-uploaded. |
|
| gsm |
GSM cellular signal strength degree, range 0-4 (0=no signal, 4=strongest). |
|
| term_defense |
Armed/disarmed status bit, extracted from term_info bit 0 (1=armed, 0=disarmed). |
|
| term_charge |
Charging status bit, extracted from term_info bit 2 (1=charging, 0=not charging). |
|
| acc |
ACC/ignition status. |
|
| data_mode |
Upload mode code (e.g. real-time vs. supplementary/re-uploaded data). |
|
| mnc |
Mobile Network Code of the serving cell. |
|
| battery |
Internal battery charge level, 0-100. |
% |
| mileage |
Accumulated mileage/odometer value. |
m |
| text |
Raw text content of a terminal command response/answer. |
|
| rfid_card |
RFID card number read by the device. |
|
| voltage_level |
Battery/power voltage level degree. |
|
| cellular_signal_strength |
Cellular network signal strength. |
|
| hdop |
Horizontal Dilution of Precision of the GPS fix. |
|
| pwr_ext |
External power supply voltage. |
V |
| cell_id |
Cell Tower ID of the serving cell. |
|
| mcc |
Mobile Country Code of the serving cell. |
|
| term_pos |
GPS positioning status bit, extracted from term_info bit 6 (1=fix valid, 0=no fix). |
|
| term_clock_stat |
Clock/GPS time synchronization status bit, extracted from term_info bit 5 (1=synced, 0=not synced). |
|
| term_info |
Terminal information status byte. Bit-level breakdown (bit N maps to term_info:N+1 in Wialon)
(click to expand):
term_info:1=Defense/armed status (1=armed, 0=disarmed);
term_info:2=ACC/ignition status (1=ACC ON, 0=ACC OFF);
term_info:3=Charging status (1=charging, 0=not charging);
term_info:4=Reserved (not decoded);
term_info:5=Reserved (not decoded);
term_info:6=Clock/GPS time synchronization status (1=synced, 0=not synced);
term_info:7=GPS positioning status (1=fix valid, 0=no fix);
term_info:8=Fuel/oil circuit relay cut-off status (1=cut off, 0=normal).
|
|
| alarm_status |
Simplified alarm status nibble: 0=Normal, 1=Shock/Vibrating, 2=Power Cut, 3=Low Battery, 4=SOS. |
|
| serial_number |
Packet serial number used for ACK matching, present in most packet types. |
|
| lac |
Location Area Code of the serving cell. |
|
| fence_id |
Geofence identifier associated with the triggered fence-in/fence-out alarm. |
|
| server_flag |
Server flag/command identifier associated with an online command reply. |
|
| term_fuel |
Fuel/oil circuit relay cut-off status bit, extracted from term_info bit 7 (1=cut off, 0=normal). |
|
| step_count |
Pedometer step count. |
|
| encoding |
Text encoding/language byte accompanying a command response (closely related to the `language` field). |
|
| rfid_effective_id |
Flag indicating whether the scanned RFID card is a valid/effective (authorized) card. |
|
| rx_level |
Cellular receive signal level per base station. |
|
| voltage |
Voltage level degree. |
|
| content |
Text content of a command response sent by the platform. |
|
| sta1 |
Status register 1 bitmask (packet 0x94): disassembly/tamper detection and arm/disarm status bits. |
|
| imsi |
SIM card IMSI number. |
|
| dyd |
Fuel/electricity cut-off relay status bitmask (packet 0x94). |
|
| alm3 |
Alarm register 3 bitmask (packet 0x94): SMS/Phone/Network notification switches combined with Power Off/Overspeed alarm enable/trigger bits. |
|
| base_station_type |
Base station network type flag (2G/4G). |
|
| rssi_signal_strength |
Bluetooth beacon RSSI signal strength. |
|
| center_num |
Center/admin phone number configured on the device. |
|
| rfid |
RFID card number (0x94 sub-type 0x0E). |
|
| language |
Requested response language for platform address parsing / SMS reply. 0 = no reply required; 1 = Chinese; 2 = English. Present in login, heartbeat, LBS, alarm, and online-command packets (0x01, 0x23, 0x36, 0x28, 0xA1, 0x27, 0xA4, 0x39, 0x19, 0xA5, 0xA9, 0x2A/0x17/0xA7, 0x80). |
|
| bluetooth_battery_strength |
Bluetooth beacon's own battery level. |
|
| fence |
Geofence configuration information string. |
|
| voltage_N |
Per-second historical voltage sample series (indexed voltage_1..voltage_N). |
V |
| uuid |
iBeacon UUID identifier. |
|
| wifi_rssi_N |
RSSI signal strength of a detected WiFi access point (indexed wifi_rssi_1..wifi_rssi_N). |
|
| mac |
Bluetooth beacon MAC address. |
|
| hum |
Ambient humidity reading. |
% |
| imei |
Device IMEI number. |
|
| iccid |
SIM card ICCID number. |
|
| alm1 |
Alarm register 1 bitmask (packet 0x94): SMS/Phone/Network notification switches combined with Displacement/Vibration alarm enable/trigger bits. |
|
| minor |
iBeacon Minor identifier. |
|
| timing_advance |
Cellular timing advance value used for LBS ranging. |
|
| sos_num |
SOS phone number(s) configured on the device. Multiple numbers indexed sequentially (sos_num1..sos_numN). |
|
| wifi_mac_N |
MAC address of a detected WiFi access point (indexed wifi_mac_1..wifi_mac_N). |
|
| door |
Door open/closed status. |
|
| temp |
Ambient/sensor temperature reading. |
°C |
| mode |
Device operating mode string. |
|
| major |
iBeacon Major identifier. |
|
| alm2 |
Alarm register 2 bitmask (packet 0x94): SMS/Phone/Network notification switches combined with Low Battery alarm enable/trigger bits. |
|
