Suntech ST380

Information of Mobile Country Code

Information of Mobile Network Code

Information of Location Area Code

Information of Cell ID

Information of Rx Level

Information of Timing Advance

Device Model

Current I/O status of the inputs and the outputs:

Ignition + Input1 + Input 2 + Input 3 + Out1 + Out2

Ignition : ‘1’ (ON), ‘0’ (OFF)

Input1 ~ Input3 : ‘1’ (Ground, Shorted), ‘0’ (Opened)

Out1 ~ Out2 : ‘1’ (Active), ‘0’ (Inactive)

Report is real time (1), Report is storage (0)

Location Code ID(3 digits hex) + Serving Cell BSIC(2 digits decimal)

Voltage value of the main power

Voltage value of backup battery

Driving hour-meter

Traveled distance in meter

This field brings the information about whether collaborative Network is

enabled or not, and which RF channel is set.

First digit means collaborative network is Disabled or not

0 means collaborative network is Disabled

1 means collaborative network is Enabled

The other two digits means RF CHANNEL set

Example 1:

003: collaborative network is Disabled and RF CHANNEL set is 03

Example 2:

103: collaborative network is Enabled and RF CHANNEL set is 03

‘1’ = Idle mode(Parking)

‘2’ = Active Mode(Driving)

‘6’ = ERB Mode

Message number

Number of the released Software Version

Serial number of RF device which is in Emergency mode

Type of Message

1:Emergency Message without GPS coordinates

2:Emergency Message with GPS coordinates

3:Emergency Message without GPS coordinates stored during

JAM_DELAY (QUIET_MODE)

4:Emergency Message with GPS coordinates stored during JAM_DELAY

(QUIET_MODE)

Battery Voltage of RF Device which is in emergency mode

RSSI in dBm received from RF Device which is in emergency mode.

-255 means RSSI is not available.