GPS трекер Suntech ST380 | Интегрирован с Wialon

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Suntech ST380 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Suntech ST380
Уникальный ID:	custom

Укажите следующие параметры в конфигурационной программе или в конфигурации Suntech ST380 для использования его в Wialon Hosting :

Порт сервера:

21598

Всего в серверном центре Wialon используется 316 объектов Suntech ST380 — это составляет 0.01% от общего количества устройств в категории «Автомобильные контролеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
mcc	Information of Mobile Country Code
mnc	Information of Mobile Network Code
lac	Information of Location Area Code
cell_id	Information of Cell ID
rx_level	Information of Rx Level
ta	Information of Timing Advance
model	Device Model
I/O	Current I/O status of the inputs and the outputs: Ignition + Input1 + Input 2 + Input 3 + Out1 + Out2 Ignition : ‘1’ (ON), ‘0’ (OFF) Input1 ~ Input3 : ‘1’ (Ground, Shorted), ‘0’ (Opened) Out1 ~ Out2 : ‘1’ (Active), ‘0’ (Inactive)
msg_type	Report is real time (1), Report is storage (0)
cell	Location Code ID(3 digits hex) + Serving Cell BSIC(2 digits decimal)
pwr_ext	Voltage value of the main power
bck_volt	Voltage value of backup battery
h_meter	Driving hour-meter
dist	Traveled distance in meter	m
col_net_rf_ch	This field brings the information about whether collaborative Network is enabled or not, and which RF channel is set. First digit means collaborative network is Disabled or not 0 means collaborative network is Disabled 1 means collaborative network is Enabled The other two digits means RF CHANNEL set Example 1: 003: collaborative network is Disabled and RF CHANNEL set is 03 Example 2: 103: collaborative network is Enabled and RF CHANNEL set is 03
mode	‘1’ = Idle mode(Parking) ‘2’ = Active Mode(Driving) ‘6’ = ERB Mode
msg_num	Message number
sw_ver	Number of the released Software Version
fix	GPS is fixed (1); GPS is not fixed (0)
fr_serial	Serial number of RF device which is in Emergency mode
rf_msg_type	Type of Message 1:Emergency Message without GPS coordinates 2:Emergency Message with GPS coordinates 3:Emergency Message without GPS coordinates stored during JAM_DELAY (QUIET_MODE) 4:Emergency Message with GPS coordinates stored during JAM_DELAY (QUIET_MODE)
rf_volt	Battery Voltage of RF Device which is in emergency mode
rf_rssi	RSSI in dBm received from RF Device which is in emergency mode. -255 means RSSI is not available.	dBm

Имя параметра

Описание

Единицы измерения

mcc

Information of Mobile Country Code

mnc

Information of Mobile Network Code

lac

Information of Location Area Code

cell_id

Information of Cell ID

rx_level

Information of Rx Level

Information of Timing Advance

model

Device Model

I/O

Current I/O status of the inputs and the outputs:

Ignition + Input1 + Input 2 + Input 3 + Out1 + Out2

Ignition : ‘1’ (ON), ‘0’ (OFF)

Input1 ~ Input3 : ‘1’ (Ground, Shorted), ‘0’ (Opened)

Out1 ~ Out2 : ‘1’ (Active), ‘0’ (Inactive)

msg_type

Report is real time (1), Report is storage (0)

cell

Location Code ID(3 digits hex) + Serving Cell BSIC(2 digits decimal)

pwr_ext

Voltage value of the main power

bck_volt

Voltage value of backup battery

h_meter

Driving hour-meter

dist

Traveled distance in meter

col_net_rf_ch

This field brings the information about whether collaborative Network is

enabled or not, and which RF channel is set.

First digit means collaborative network is Disabled or not

0 means collaborative network is Disabled

1 means collaborative network is Enabled

The other two digits means RF CHANNEL set

Example 1:

003: collaborative network is Disabled and RF CHANNEL set is 03

Example 2:

103: collaborative network is Enabled and RF CHANNEL set is 03

mode

‘1’ = Idle mode(Parking)

‘2’ = Active Mode(Driving)

‘6’ = ERB Mode

msg_num

Message number

sw_ver

Number of the released Software Version

fix

GPS is fixed (1); GPS is not fixed (0)

fr_serial

Serial number of RF device which is in Emergency mode

rf_msg_type

Type of Message

1:Emergency Message without GPS coordinates

2:Emergency Message with GPS coordinates

3:Emergency Message without GPS coordinates stored during

JAM_DELAY (QUIET_MODE)

4:Emergency Message with GPS coordinates stored during JAM_DELAY

(QUIET_MODE)

rf_volt

Battery Voltage of RF Device which is in emergency mode

rf_rssi

RSSI in dBm received from RF Device which is in emergency mode.

-255 means RSSI is not available.

dBm

Заполните заявку для начала работы с Wialon

Продукты

Нишевые продукты для решения точечных задач

Suntech ST380

Другие устройства производителя

Работайте с Wialon и достигайте самых амбициозных целей в телематике

Станьте партнером

Закажите Wialon в вашем регионе

Заполните заявку для начала работы с Wialon