| gsm_signal |
GSM signal strength |
|
| mileage |
Mileage |
Km |
| power_status |
Power status,
0～100 means battery power level, eg 8%（unit: 0～ 100%）,
0xFF means the device is not with battery,
0xAA means charging,
0xAB means powered by power supply.
|
|
| cell_id |
Cell id |
|
| lac |
Lac id |
|
| product_type |
Product type |
|
| status |
Status, Bits 1-16
BIT2, 0: Normal 1: Low power BIT3, 0: SIM card cover closed 1: SIM card cover open BIT5, Motor status, 1 means the motor is unlocked, 0 means the motor is locked BIT6, Button state, 1 means the button is on, 0 means the button is off BIT12, 0: No Bluetooth connection, 1: Bluetooth connection (heartbeat packet
connection between the motherboard and Bluetooth)
|
|
| alarm_bits |
Alarm Bits 1-16
BIT1, Speeding alarm sign
BIT2, Low battery alarm BIT3, Low power dormancy alarm
flag BIT6, Enter the fence alarm BIT7, Out of fence alarm BIT8, Wrong unlocking event alarms
|
|
| gyro_x |
Gyro sensor X, Plus 180 degree, minus 180 degree |
|
| gyro_y |
Gyro sensor Y, Plus 90 degree, minus 90 degree |
|
| gyro_z |
Gyro sensor Z, Plus 180 degree, minus 180 degree |
|
| alarm_event |
Alarm event,
1 indicate remote fixed password,
2 indicate remote dynamic password
3 indicate dynamic password on site (Bluetooth orWIFI)APP
4 indicate dynamic password on site from keyboard
5 xxx
6 indicate wrong remote fixed password
7 indicate wrong remote dynamic password
8 indicate wrong dynamic password from on site (Bluetooth or WIFI)APP
9 indicate wrong dynamic password from keyboard,
10 xxx
11 indicate unlock overtime alert
12 Abnormal unlock alarm, abnormal unlock alarm, the lock has been作 opened abnormally, (Eg JT702 cable is cut) (When the device unlocked and the cable
13 lock remind didn’t pull out in 30 seconds, it will make noise to remind and then lock automatically).
14 SIM card lid open alarm, the lid open when the device is in locking status will be considered abnormal open.
15 Front cover tamper alarm, when the front cover damaged, the alarm will be generated. (For JT705 and JT706).
16 Unlock failed, the device cannot be unlocked, and not positioning.
17 Unlock failed, the device cannot be unlocked outside set geofence.
18 The electromagnet control is abnormal
19 The secondary board communication is abnormal
20\21\22\23 When the tilt angle in front back left right more than 45 degree and holds for 3 seconds, the tilting alarm will be triggered.
|
|
| pass |
Password,
88888888：Normal unlock fixed or dynamic password, abnormal unlocking fixed or dynamic password.
|
|
| carry_unlock_cmd |
Carry on the unlock command,
This parameter is only available when the password input correctly and unlocked
1 indicate unlock normally: The geofence area unlock function is not activated. 2 indicate unlock normally; The geofence area unlock function activated, the device is unlocked inside the set Geofence.
3 indicate unlock normally: the geofence area unlock function is activated, unlock remotely and the device is not positioning.
|
|
| vehicle_inf |
Vehicle information,
vehicle information displays only when the device unlocked successfully. If not the vehicle information not filled, will be displayed with 0 or not displaying.
|
|
| card_num |
RFID card number
|
|
| command_id |
Attachment
command ID
|
|
| device_type |
Device type
|
|
| status_bit |
Status bit
|
|
| wakeup_source |
Wakeup source 1: RTC alarm wakeup, 2: G
sensor vibration wakeup 3:
Open cover wakeup 4: Cut rope wakeup 5:
Charge wakeup 6: Swipe
card wakeup 7: Lora wakeup 8: VIP number
wakeup 9: SMS wakeup 10:
Bluetooth wakeup
|
|
| mcc |
MCC
|
|
| mnc |
MNC
|
|
