TaigaIoT MQTT

Forum Discussion

Número de unidades

ON-LINE

TOTAL

Information
Parameters

Features TaigaIoT MQTT:

Caixa preta
BLE habilitado
Suporte GLONASS

The following data should also be added to TaigaIoT MQTT unit properties section of Wialon GPS tracking software :

Device type:	TaigaIoT MQTT
ID único:	custom

Specify the following parameters in configuration software or configuration TaigaIoT MQTT for use in Wialon Hosting :

Porta do servidor:

22309

0 units of TaigaIoT MQTT device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name

Description

Units

model_id

Unique device model identifier

fw_ver

Device firmware version

dwn_uid

Downlink uid, Indicates uid of downlink frame, this frame generated as answer for

cmd_code

Command code, Indicates code of command

cmd_res

Command execution result, Indicates result of command execution:

0x00 – execution success

0x01 – 0xFF – execution error code

hdop

Horizontal dilution of precision

geof1

Inside geofence 1 flag

geof2

Inside geofence 2 flag

mov_flg

Movement flag (based on accelerometer data)

wifi_mac_#

Wifi BSSID

wifi_rssi_#

Wifi RSSI

rfu

RFU

netw_num

Wifi Home flag (Bits 1 - 3)

Bit 1 - Home flag of first wi-fi network

Bit 2 - Home flag of second wi-fi network

Bit 3 - Home flag of third wi-fi network

meas_per

Duration of measurement period in minutes

act_ind

Averaged index of motion activity in measurement interval

sens_pos

Sensor mounting position

0x00 – sensor is mounted horizontally on waste container cover

0x01 – sensor is mounted vertically on side of container

upp_dist

Measured distance upper sensor

The distance between ultrasonic sensor and nearest object, centimeters

side_dist

Measured distance side sensor

The distance between ultrasonic sensor and nearest object, centimeters

sens_temp

The measured temperature in Celsius degrees

waste

The calculated percentage of waste in container

sl_addr

Address of modbus slave

reg_addr

Address of modbus register

reg_val

Modbus register data

ble_major#

Major field of visible iBeacon

ble_minor#

Minor field of visible iBeacon

ble_rssi#

Received signal strength indicator for visible beacon

curr

Current value

counter#

Counter value

temp#

Temperature in degrees Celsius

battery

Indicates device battery charge

pwr_type

Type of power

0 – battery power

1 – external power

prot_ver

Indicates version of W-protocol

frame_type

Type of frame

0 - Device info frame

1 - Settings frame

2 - Command confirmation frame

3 - GNSS geolocation frame

4 - Wi-Fi geolocation frame

5 - Motion activity frame

6 - Shock detection frame

7 - Waste sensor frame

8 - Modbus frame

9 - Bluetooth iBeacon geolocation frame

10 - 4-20mA frame

11 - Digital input frame

12 - Analog input frame

13 - Pulse conter frame

14 - LBS geolocation frame

15 - Temperature frame

16 - RS485 frame

17 - SOS frame

18 - Turn detection frame

19 - Movement detection frame

frame_evt

Frame event code. Indicates a reason why this frame was generated

if frame_type = 0 then

0x00 – frame generate reason is boot

0x01 – frame generate reason is platform request

if frame_type = 3 then