Asset GPS tracker ToTarget GPS-ELOCK | Integrated with Wialon

Features ToTarget GPS-ELOCK:

E-seal

Supported in Wialon:

Gerenciamento remoto via GPRS
Gerenciamento remoto via SMS
Comunicação via TCP

The following data should also be added to ToTarget GPS-ELOCK unit properties section of Wialon GPS tracking software :

Device type:	ToTarget GPS-ELOCK
ID único:	serial

Specify the following parameters in configuration software or configuration ToTarget GPS-ELOCK for use in Wialon Hosting :

Porta do servidor:

21691

5 units of ToTarget GPS-ELOCK device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
drvr_num	Driver number
loc_st	Location status: 0 - Invalid location 2 - 2D location 3 - 3D location
ant_st	GPS antenna status: 0 - Antenna is good 1 - Antenna is broken 2 - Antenna short 3 - Mismatch antenna
mileage	Cumulative mileage	km
veh_st	Vehicle status: bit4 - Loaded bit9 - No GPRS network bit13 - Weak network signal bit16 - Only by SMS bit17 - Need encryption by PIN code bit18 - GPS shutdown status bit20 - Lock rod opened bit21 - Lock rod broken bit22 - Lock shell opened
alarm_st	Alarm status: bit0 - Rob alarm bit1 - Steal alarm bit2 - Lock rod opened alarm bit3 - Low Battery alarm bit4 - Shell opened alarm bit5 - Lock rod broken alarm bit7 - Lock motor close bit9 - Over-speed alarm bit10 - GPS antenna failure alarm bit11 - GPS module failure alarm
lac	Location Area Code
cell_id	Cell ID
mcc	Mobile country code
mnc	Mobile network code
rx_lvl	Signal strength
func_code	Function code: 1 - Call response 2 - GPS data with base station information 3 - GPS data at regular time 6 - Single data compensation upload in GPRS blind area 7 - Multi base station data 9 - GPS data with base station information and cumulative time 22 - Instruction return code 45 - Upload message of Terminal
lock_st	E-Lock status
rec_f_code	Received function code
inst_code	Instruction code
op_instr	Operation instruction. 85 - operation reply.
cmd_code	Command code
cmdsrc	Command source: 0 - SMS, 1 - automatic 2 - keyboard 3 - handset, 4 - center, 5 - gate
voltage_st	Voltaget status: 48 - Serious low voltage 49 - Too low voltage 50 - Low voltage 51-54 - Normal voltage 55 - Full

If your device has 4-digits port in the configurator please enter 9010 port.

Preencha um formulário de solicitação para começar

Produtos

Produtos de nicho para tarefas específicas

ToTarget GPS-ELOCK

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Seja um parceiro

Solicite o Wialon na sua região

Preencha um formulário de solicitação para começar