Asset GPS tracker WanWay S20 | Integrated with Wialon

Supported in Wialon:

The following data should also be added to WanWay S20 unit properties section of Wialon GPS tracking software :

Device type:	WanWay S20
ID único:	custom

Specify the following parameters in configuration software or configuration WanWay S20 for use in Wialon Hosting :

Porta do servidor:

22060

1948 units of WanWay S20 device type are connected to Wialon Data Center. This represents 1.46% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage	Voltage degree 0-6: 6: internal power voltage >= 4 V; battery volume = 100% 5: internal power voltage >= 3.8 V; battery volume = 80% 4: internal power voltage >= 3.7 V; battery volume = 55% 3: internal power voltage >= 3.6 V; battery volume = 30% 2: internal power voltage >= 3.5 V; battery volume = 10% 1: internal power voltage >= 3.45 V; battery volume = 5% 0: power off If internal power voltage is less than 3.6 V (3-0), low power alarm is triggered
gsm	GSM signal strength degree

The file contains a detailed description and specifications for SMS commands.

Preencha um formulário de solicitação para começar

WanWay S20