| 3_job_id |
Unique job id
|
|
| 3_job_sn |
Device serial number
|
|
| 3_job_fw_ver |
Deivce firmware version
|
|
| 4_#_prod_name |
Name of the product for section group #
|
|
| 4_#_sections_count |
Number of sections in section group #
|
|
| 5_#_№_implement_offset |
Left offset for tool № in section group #
|
sm |
| 5_#_№_coverage_width |
Coverage width of tool № in section group #
|
sm |
| 6_#_target_rate |
Tool target rate (units per meter) in section group # in mode "Precise"
|
u/m |
| 6_#_trate_lo_err |
Tool accuracy low limit in section group # in mode "Precise"
|
% |
| 6_#_trate_hi_err |
Tool accuracy high limit in section group # in mode "Precise"
|
% |
| 6_#_doubles_max_err |
Tool doubles limit in section group # in mode "Precise"
|
% |
| 6_#_skips_max_err |
Tool skips limit in section group # in mode "Precise"
|
% |
| 7_#_target_rate |
Tool target rate (units per meter) in section group # in mode "Units per path"
|
u/m |
| 7_#_trate_lo_err |
Tool accuracy low limit in section group # in mode "Units per path"
|
% |
| 7_#_trate_hi_err |
Tool accuracy high limit in section group # in mode "Units per path"
|
% |
| 8_#_rate_min |
Tool minimal rate intensity (units per seconds) in section group # in mode "Units per time"
|
u/s |
| 9_#_target_rate |
Tool target rate (kg per hectare) in section group # in mode "Mass per area"
|
kg/ha |
| 9_#_trate_lo_err |
Tool accuracy low limit in section group # in mode "Mass per area"
|
% |
| 9_#_trate_hi_err |
Tool accuracy high limit in section group # in mode "Mass per area"
|
% |
| 10_#_target_rate |
Tool target rate (liters per hectare) in section group # in mode "Volume per area"
|
l/ha |
| 10_#_trate_lo_err |
Tool accuracy low limit in section group # in mode "Volume per area"
|
% |
| 10_#_trate_hi_err |
Tool accuracy high limit in section group # in mode "Volume per area"
|
% |
| 11_#_№_product_units |
Amount of contributed product units by tool № in section group # in mode "Precise"
|
units |
| 11_#_№_product_doubles |
Amount of doubles made by tool № in section group # in mode "Precise"
|
units |
| 11_#_№_product_skips |
Amount of skips made by tool № in section group # in mode "Precise"
|
units |
| 11_#_№_travel_path |
Travel path of tool № in section group # in mode "Precise"
|
sm |
| 11_#_№_travel_time |
Travel time of tool № in section group # in mode "Precise"
|
s |
| 11_#_№_control_type |
Tool № in section group # control type:
0 - control of product application; 1 - tramline control (product loss); 2 - control is disabled by the operator; 3 - control is not possible due to sensor malfunction
|
|
| 12_#_№_product_units |
Amount of contributed product units by tool № in section group # in mode "Units per path"
|
units |
| 12_#_№_travel_path |
Travel path of tool № in section group # in mode "Units per path"
|
sm |
| 12_#_№_travel_time |
Travel time of tool № in section group # in mode "Units per path"
|
s |
| 12_#_№_control_type |
Tool № in section group # control type in mode "Units per path": 0 - control of product application; 1 - tramline control (product loss); 2 - control is disabled by the operator; 3 - control is not possible due to sensor malfunction
|
|
| 13_#_№_product_units |
Amount of contributed product units by tool № in section group # in mode "Units per time"
|
units |
| 13_#_№_travel_path |
Travel path of tool № in section group # in mode "Units per time"
|
sm |
| 13_#_№_travel_time |
Travel time of tool № in section group # in mode "Units per time"
|
s |
| 13_#_№_control_type |
Tool № in section group # control type in mode "Units per time": 0 - control of product application; 1 - tramline control (product loss); 2 - control is disabled by the operator; 3 - control is not possible due to sensor malfunction
|
|
| 14_#_№_product_weight |
Amount of contributed product units by tool № in section group # in mode "Mass per area"
|
kg |
| 14_#_№_travel_path |
Travel path of tool № in section group # in mode "Mass per area"
|
sm |
| 14_#_№_travel_time |
Travel time of tool № in section group # in mode "Mass per area"
|
s |
| 14_#_№_control_type |
Tool № in section group # control type in mode "Mass per area": 0 - control of product application; 1 - tramline control (product loss); 2 - control is disabled by the operator; 3 - control is not possible due to sensor malfunction
|
|
| 15_#_№_product_volume |
Amount of contributed product units by tool № in section group # in mode "Volume per area"
|
l |
| 15_#_№_travel_path |
Travel path of tool № in section group # in mode "Volume per area"
|
sm |
| 15_#_№_travel_time |
Travel time of tool № in section group # in mode "Volume per area"
|
s |
| 15_#_№_control_type |
Tool № in section group # control type in mode "Volume per area": 0 - control of product application; 1 - tramline control (product loss); 2 - control is disabled by the operator; 3 - control is not possible due to sensor malfunction
|
|
| job_id |
Current job id
|
|
| job_name |
Current job name
|
|
| 11_#_№_sown_ha |
Tool № in section group # current sown area in mode "Precise"
|
ha |
| 11_#_№_not_sown_ha |
Tool № in section group # current not sown area in mode "Precise"
|
ha |
| 11_#_№_unknown_ha |
Tool № in section group # current not controlled area in mode "Precise"
|
ha |
| 11_#_№_not_sown_pct |
Tool № in section group # current not sown area in mode "Precise"
|
% |
| 11_#_№_quality_pct |
Tool № in section group # current quality sown area in mode "Precise"
|
% |
| 11_#_№_doubles_pct |
Tool № in section group # current doubles at area in mode "Precise"
|
% |
| 11_#_№_skips_pct |
Tool № in section group # current skips at area in mode "Precise"
|
% |
| 11_#_№_low_rate_alarm_units |
Tool № in section group # current low rate limit at area in mode "Precise"
|
units |
| 11_#_№_high_rate_alarm_units |
Tool № in section group # current high rate limit at area in mode "Precise"
|
units |
| 11_#_№_low_rate_alarm |
Tool № in section group # current low rate alarm at area in mode "Precise"
|
|
| 11_#_№_high_rate_alarm |
Tool № in section group # current high rate alarm at area in mode "Precise"
|
units |
| 11_#_№_rate_alarm_path_m |
Tool № in section group # current path with rate alarm at area in mode "Precise"
|
m |
| 11_#_№_rate_alarm_time |
Tool № in section group # current time with rate alarm at area in mode "Precise"
|
s |
| 11_#_№_product_losses |
Tool № in section group # current product losses at area in mode "Precise"
|
units |
| 11_#_№_product_losses_alarm |
Tool № in section group # current alarm product losses at area in mode "Precise"
|
|
| 11_#_№_product_losses_path_m |
Tool № in section group # current path with product losses at area in mode "Precise"
|
m |
| 11_#_№_product_losses_time |
Tool № in section group # current time with product losses at area in mode "Precise"
|
s |
| 12_#_№_sown_ha |
Tool № in section group # current sown area in mode "Units per path"
|
ha |
| 12_#_№_not_sown_ha |
Tool № in section group # current not sown area in mode "Units per path"
|
ha |
| 12_#_№_unknown_ha |
Tool № in section group # current not controlled area in mode "Units per path"
|
ha |
| 12_#_№_low_rate_alarm_units |
Tool № in section group # current low rate limit at area in mode "Units per path"
|
units |
| 12_#_№_high_rate_alarm_units |
Tool № in section group # current high rate limit at area in mode "Units per path"
|
units |
| 12_#_№_low_rate_alarm |
Tool № in section group # current low rate alarm at area in mode "Units per path"
|
|
| 12_#_№_high_rate_alarm |
Tool № in section group # current high rate alarm at area in mode "Units per path"
|
|
| 12_#_№_rate_alarm_path_m |
Tool № in section group # current path with rate alarm at area in mode "Units per path"
|
|
| 12_#_№_rate_alarm_time |
Tool № in section group # current time with rate alarm at area in mode "Units per path"
|
|
| 12_#_№_product_losses |
Tool № in section group # current product losses at area in mode "Units per path"
|
units |
| 12_#_№_product_losses_alarm |
Tool № in section group # current alarm product losses at area in mode "Units per path"
|
|
| 12_#_№_product_losses_path_m |
Tool № in section group # current path with product losses at area in mode "Units per path"
|
m |
| 12_#_№_product_losses_time |
Tool № in section group # current time with product losses at area in mode "Units per path"
|
s |
| 13_#_№_sown_ha |
Tool № in section group # current sown area in mode "Units per time"
|
ha |
| 13_#_№_not_sown_ha |
Tool № in section group # current not sown area in mode "Units per time"
|
ha |
| 13_#_№_unknown_ha |
Tool № in section group # current not controlled area in mode "Units per time"
|
ha |
| 13_#_№_low_rate_alarm_units |
Tool № in section group # current low rate limit at area in mode "Units per time"
|
units |
| 13_#_№_low_rate_alarm |
Tool № in section group # current low rate alarm at area in mode "Units per time"
|
|
| 13_#_№_rate_alarm_path_m |
Tool № in section group # current path with rate alarm at area in mode "Units per time"
|
|
| 13_#_№_rate_alarm_time |
Tool № in section group # current time with rate alarm at area in mode "Units per time"
|
|
| 13_#_№_product_losses |
Tool № in section group # current product losses at area in mode "Units per time"
|
units |
| 13_#_№_product_losses_alarm |
Tool № in section group # current alarm product losses at area in mode "Units per time"
|
|
| 13_#_№_product_losses_path_m |
Tool № in section group # current path with product losses at area in mode "Units per time"
|
m |
| 13_#_№_product_losses_time |
Tool № in section group # current time with product losses at area in mode "Units per time"
|
s |
| 14_#_№_factical_units_rate |
Tool № in section group # current units rate per area in mode "Mass per area"
|
kg/ha |
| 14_#_№_low_rate_alarm_units |
Tool № in section group # current low rate limit at area in mode "Mass per area"
|
units |
| 14_#_№_high_rate_alarm_units |
Tool № in section group # current high rate limit at area in mode "Mass per area"
|
units |
| 14_#_№_low_rate_alarm |
Tool № in section group # current low rate alarm at area in mode "Mass per area"
|
|
| 14_#_№_high_rate_alarm |
Tool № in section group # current high rate alarm at area in mode "Mass per area"
|
|
| 14_#_№_rate_alarm_path_m |
Tool № in section group # current path with rate alarm at area in mode "Mass per area"
|
|
| 14_#_№_rate_alarm_time |
Tool № in section group # current time with rate alarm at area in mode "Mass per area"
|
|
| 15_#_№_factical_units_rate |
Tool № in section group # current units rate per area in mode "Volume per area"
|
l/ha |
| 15_#_№_low_rate_alarm_units |
Tool № in section group # current low rate limit at area in mode "Volume per area"
|
units |
| 15_#_№_high_rate_alarm_units |
Tool № in section group # current high rate limit at area in mode "Volume per area"
|
units |
| 15_#_№_low_rate_alarm |
Tool № in section group # current low rate alarm at area in mode "Volume per area"
|
|
| 15_#_№_high_rate_alarm |
Tool № in section group # current high rate alarm at area in mode "Volume per area"
|
|
| 15_#_№_rate_alarm_path_m |
Tool № in section group # current path with rate alarm at area in mode "Volume per area"
|
|
| 15_#_№_rate_alarm_time |
Tool № in section group # current time with rate alarm at area in mode "Volume per area"
|
|
| fin_job_id |
Finished job id
|
|
| fin_job_name_# |
Finished job name at sectin group #
|
|
| fin_11_#_№_sown_ha |
Tool № in section group # total sown area in mode "Precise"
|
ha |
| fin_11_#_№_not_sown_ha |
Tool № in section group # total not sown area in mode "Precise"
|
ha |
| fin_11_#_№_unknown_ha |
Tool № in section group # total not controlled area in mode "Precise"
|
ha |
| fin_11_#_№_not_sown_pct |
Tool № in section group # total not sown area in mode "Precise"
|
% |
| fin_11_#_№_quality_pct |
Tool № in section group # total quality sown area in mode "Precise"
|
% |
| fin_11_#_№_doubles_pct |
Tool № in section group # total doubles at area in mode "Precise"
|
% |
| fin_11_#_№_skips_pct |
Tool № in section group # total skips at area in mode "Precise"
|
% |
| fin_11_#_№_low_rate_alarm_units |
Tool № in section group # total low rate limit at area in mode "Precise"
|
units |
| fin_11_#_№_high_rate_alarm_units |
Tool № in section group # total high rate limit at area in mode "Precise"
|
units |
| fin_11_#_№_rate_alarm_path_m |
Tool № in section group # total path with rate alarm at area in mode "Precise"
|
m |
| fin_11_#_№_rate_alarm_time |
Tool № in section group # total time with rate alarm at area in mode "Precise"
|
s |
| fin_11_#_№_product_losses |
Tool № in section group # total product losses at area in mode "Precise"
|
units |
| fin_11_#_№_product_losses_path_m |
Tool № in section group # total path with product losses at area in mode "Precise"
|
m |
| fin_11_#_№_product_losses_time |
Tool № in section group # total time with product losses at area in mode "Precise"
|
s |
| fin_11_#_№_product_units |
Tool № in section group # total amount of contributed product units in mode "Precise"
|
units |
| fin_12_#_№_sown_ha |
Tool № in section group # total sown area in mode "Units per path"
|
ha |
| fin_12_#_№_not_sown_ha |
Tool № in section group # total not sown area in mode "Units per path"
|
ha |
| fin_12_#_№_unknown_ha |
Tool № in section group # total not controlled area in mode "Units per path"
|
ha |
| fin_12_#_№_low_rate_alarm_units |
Tool № in section group # total low rate limit at area in mode "Units per path"
|
units |
| fin_12_#_№_high_rate_alarm_units |
Tool № in section group # total high rate limit at area in mode "Units per path"
|
units |
| fin_12_#_№_rate_alarm_path_m |
Tool № in section group # total path with rate alarm at area in mode "Units per path"
|
|
| fin_12_#_№_rate_alarm_time |
Tool № in section group # total time with rate alarm at area in mode "Units per path"
|
|
| fin_12_#_№_product_losses |
Tool № in section group # total product losses at area in mode "Units per path"
|
units |
| fin_12_#_№_product_losses_path_m |
Tool № in section group # total path with product losses at area in mode "Units per path"
|
m |
| fin_12_#_№_product_losses_time |
Tool № in section group # total time with product losses at area in mode "Units per path"
|
s |
| fin_12_#_№_product_units |
Tool № in section group # total amount of contributed product units in mode "Units per path"
|
units |
| fin_13_#_№_sown_ha |
Tool № in section group # total sown area in mode "Units per time"
|
ha |
| fin_13_#_№_not_sown_ha |
Tool № in section group # total not sown area in mode "Units per time"
|
ha |
| fin_13_#_№_unknown_ha |
Tool № in section group # total not controlled area in mode "Units per time"
|
ha |
| fin_13_#_№_low_rate_alarm_units |
Tool № in section group # total low rate limit at area in mode "Units per time"
|
units |
| fin_13_#_№_rate_alarm_path_m |
Tool № in section group # total path with rate alarm at area in mode "Units per time"
|
|
| fin_13_#_№_rate_alarm_time |
Tool № in section group # total time with rate alarm at area in mode "Units per time"
|
|
| fin_13_#_№_product_losses |
Tool № in section group # total product losses at area in mode "Units per time"
|
units |
| fin_13_#_№_product_losses_path_m |
Tool № in section group # total path with product losses at area in mode "Units per time"
|
m |
| fin_13_#_№_product_losses_time |
Tool № in section group # total time with product losses at area in mode "Units per time"
|
s |
| fin_13_#_№_product_units |
Tool № in section group # total amount of contributed product units in mode "Units per time"
|
units |
| fin_14_#_№_factical_units_rate |
Tool № in section group # total units rate per area in mode "Mass per area"
|
kg/ha |
| fin_14_#_№_low_rate_alarm_units |
Tool № in section group # total low rate limit at area in mode "Mass per area"
|
units |
| fin_14_#_№_high_rate_alarm_units |
Tool № in section group # total high rate limit at area in mode "Mass per area"
|
units |
| fin_14_#_№_rate_alarm_path_m |
Tool № in section group # total path with rate alarm at area in mode "Mass per area"
|
|
| fin_14_#_№_rate_alarm_time |
Tool № in section group # total time with rate alarm at area in mode "Mass per area"
|
|
| fin_14_#_№_product_weight |
Tool № in section group # total weight of contributed product in mode "Mass per area"
|
kg |
| fin_15_#_№_factical_units_rate |
Tool № in section group # total units rate per area in mode "Volume per area"
|
l/ha |
| fin_15_#_№_low_rate_alarm_units |
Tool № in section group # total low rate limit at area in mode "Volume per area"
|
units |
| fin_15_#_№_high_rate_alarm_units |
Tool № in section group # total high rate limit at area in mode "Volume per area"
|
units |
| fin_15_#_№_rate_alarm_path_m |
Tool № in section group # total path with rate alarm at area in mode "Volume per area"
|
|
| fin_15_#_№_rate_alarm_time |
Tool № in section group # total time with rate alarm at area in mode "Volume per area"
|
|
| fin_15_#_№_product_volume |
Tool № in section group # total volume of contributed product in mode "Volume per area"
|
l |
