Omnicomm Light

Número de unidades

315
ON-LINE
1113
TOTAL
Features Omnicomm Light:
  • Caixa preta
  • Suporte GLONASS
  • Envio de dados para vários servidores
  • Odômetro integrado
Supported in Wialon:
  • Sensores ADC
  • Suporte para barramento CAN
  • Identificação do motorista
  • Sensores digitais
  • Gerenciamento remoto via SMS
  • Comunicação via TCP

The following data should also be added to Omnicomm Light unit properties section of Wialon GPS tracking software :

Device type: Omnicomm Light
ID único: serial

Specify the following parameters in configuration software or configuration Omnicomm Light for use in Wialon Hosting :

Porta do servidor: 20858

1113 units of Omnicomm Light device type are connected to Wialon Data Center. This represents 0.05% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
amtr_x Acceleration along the X-axis g/100
amtr_y Acceleration along the Y-axis g/100
amtr_z Acceleration along the Z-axis g/100
battery Battery level %
cllsN Fuel sensor level
flg Status flags
fllsN Fuel sensor state: 0 - off, 1 - not ready, 2 - ready, 3 - error
id_fas The ID of the onboard equipment
mid Event ID
mileage Mileage m
pwr_ext External power V
spnN CAN bus data. See FMS standard
sum_acc g
timp Engine RPM sensor value rpm
tllsN Fuel sensor temperature °C
vimp Speed sensor value km/h

OMNICOMM Light is designed for light commercial vehicles and gensets in the most common fleet monitoring scenarios. The antenna is integrated into the terminal package, making the compact stylish unit suitable for open mounting on the windshield or control panel – and easy installation in the vehicle’s cabin. It reads data from the fuel level sensor – two can be connected – and other external equipment including digital or analog sensors, temperature, weight and CAN-bus (J1939, J1708)

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone