TRX-16i

TRX-16i
Fabricante: Arqia

Número de unidades

0
ON-LINE
0
TOTAL
Supported in Wialon:
  • Modificação do parâmetro "velocidade"

The following data should also be added to TRX-16i unit properties section of Wialon GPS tracking software :

Device type: TRX-16i
ID único: imei

Specify the following parameters in configuration software or configuration TRX-16i for use in Wialon Hosting :

Porta do servidor: 22999

0 units of TRX-16i device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
dyd

Fuel/Electricity, Cutoff Status ( 1 - Valid, 0 - Invalid):
bit1 - Oil/Electricity connection
bit2 - Oil/Electricity cutoff
bit3 - Deferred execution caused by GPS unlocated
bit4 - Deferred execution caused by overspeed

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

alm3

Bitwise parameter (1 - ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Power Off Alarm
bit5 - SMSAlarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Overspeed Alarm

lac Location Area Code
inputs

Terminal information:

in1 - Defense status (locked/unlocked)
in2 - ACC status (on/off)
in3 - Charging status (connected/disconnected)
in7 - Positioned (Yes/No)
in8 - Cut off fuel (Cut off/connect)

center_num Center number
cell_id Cell Tower ID
sta1

Bitwise parameter (1 - ON, 0 - OFF):
bit1 - Disassembly Alarm Status
bit2 - Disassembly
bit5 - Remotely Disarm
bit6 - Manually Arm
bit7 - Automatically Arm
bit8 - Arm Status

alm1

Bitwise parameter (1 - ON, 1 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Displacement Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Vibration Alarm

gsm GSM signal strength degree
alm2

Bitwise parameter (1- ON, 0 - OFF):
bit1 - SMS Alarm
bit2 - Phone Alarm
bit3 - Network Alarm
bit4 - Low Battery Alarm
bit5 - SMS Alarm
bit6 - Phone Alarm
bit7 - Network Alarm
bit8 - Low Battery Alarm

mnc Mobile Network Code
mode Mode
alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm
41: Harsh acceleration alarm
42: Sharp Left Turn
43: Sharp Right Turn

48: Harsh deceleration alarm

sos_numN SOS number
fence Fence
voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

mcc Mobile Country Code

More devices from the manufacturer

Faça sua empresa crescer com a gente