OBD tracker Ulbotech T381 | Integrated with Wialon

The following data should also be added to Ulbotech T381 unit properties section of Wialon GPS tracking software :

Device type:	Ulbotech T381
ID único:	imei

Specify the following parameters in configuration software or configuration Ulbotech T381 for use in Wialon Hosting :

Porta do servidor:

21141

2591 units of Ulbotech T381 device type are connected to Wialon Data Center. This represents 3.41% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
adc0	External power supply voltage	V
adc1	Device temperature	°C
adc2	Device backup battery voltage	V
adc3	Analog input voltage (connect to device IO port)	V
alarm	Alarm triggered. Each bit relate to one alarm status of the device: Bit0: External Power off alarm Bit1: Motion alarm Bit2: Over speed alarm Bit3: Jamming alarm Bit4: Geo-fence alarm Bit5: Towing alarm Bit6: Input low alarm Bit10: Panic button alarm (SOS) Bit11: OBD alarm Bit14: Accident alarm Bit15: Power low alarm
cell_id	ID of Base transceiver station (BTS) or sector of a BTS within a Location area code (LAC)
device_status	Device status. Each bit relate to one status of the device: Bit0: Powered with external/internal power Bit1: Move/stop Bit2: Over speed status Bit3: Jamming status Bit4: Geo-fence alarm status Bit5: Immobilize status Bit6: ACC status Bit7: Input level low/high Bit8: Input level middle Bit9: Engine status Bit10: Panic button status Bit11: OBDII alarm status Bit12: Angle rapid change alert Bit13: Speed rapid change alert Bit14: Domestic roaming (judged by MNC) Bit15: International roaming (judged by MCC)
fuel_volume	Fuel consumption	Liter
geo_alarm	Geo-fence alarm status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5 . Bit definition: 0: no alarm triggered in this fence 1: alarm triggered in this fence
geo_status	Geo-fence in/out status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5 . Bit definition: 0: device out the fence or no fence is set in this bit 1: device is inside of the fence
gps_status	2D/3D locating mark: 1: no signal 2: with 2D signal 3: with 3D signal
gsm_signal	GSM signal strenth	-dbm
hdb	Harsh driver behavior data. Each bit relate to one status of the hash driver behavior: Bit0: Rapid Acceleration Bit1: Rough Braking Bit2: Harsh course Bit3: No warm up Bit4: Long idle Bit5: Fatigue driving Bit6: Rough terrain Bit7: High RPM
hdop	HDOP (Horizontal Dilution of Precision)
lac	Local Area Code
mcc	Mobile Country Code
mileage	Mileage	m
mnc	Mobile Network Code
sN_pidM	Value of OBDII PID M of server N
vin	Vehicle identification number

Parameter name

Description

Units

adc0

External power supply voltage

adc1

Device temperature

°C

adc2

Device backup battery voltage

adc3

Analog input voltage (connect to device IO port)

alarm

Alarm triggered. Each bit relate to one alarm status of the device:
Bit0: External Power off alarm
Bit1: Motion alarm
Bit2: Over speed alarm
Bit3: Jamming alarm
Bit4: Geo-fence alarm
Bit5: Towing alarm
Bit6: Input low alarm
Bit10: Panic button alarm (SOS)
Bit11: OBD alarm
Bit14: Accident alarm
Bit15: Power low alarm

cell_id

ID of Base transceiver station (BTS) or sector of a BTS within a Location area code (LAC)

device_status

Device status. Each bit relate to one status of the device:
Bit0: Powered with external/internal power
Bit1: Move/stop
Bit2: Over speed status
Bit3: Jamming status
Bit4: Geo-fence alarm status
Bit5: Immobilize status
Bit6: ACC status
Bit7: Input level low/high
Bit8: Input level middle
Bit9: Engine status
Bit10: Panic button status
Bit11: OBDII alarm status
Bit12: Angle rapid change alert
Bit13: Speed rapid change alert
Bit14: Domestic roaming (judged by MNC)
Bit15: International roaming (judged by MCC)

fuel_volume

Fuel consumption

Liter

geo_alarm

Geo-fence alarm status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: no alarm triggered in this fence
1: alarm triggered in this fence

geo_status

Geo-fence in/out status. Each bit represents one geo-fence, bit0 represents geo-fence1, bit4 represents geo-fence5
. Bit definition:
0: device out the fence or no fence is set in this bit
1: device is inside of the fence

gps_status

2D/3D locating mark:

1: no signal

2: with 2D signal

3: with 3D signal

gsm_signal

GSM signal strenth

-dbm

hdb

Harsh driver behavior data. Each bit relate to one status of the hash driver behavior:
Bit0: Rapid Acceleration
Bit1: Rough Braking
Bit2: Harsh course
Bit3: No warm up
Bit4: Long idle
Bit5: Fatigue driving
Bit6: Rough terrain
Bit7: High RPM

hdop

HDOP (Horizontal Dilution of Precision)

lac

Local Area Code

mcc

Mobile Country Code

mileage

Mileage

mnc

Mobile Network Code

sN_pidM

Value of OBDII PID M of server N

vin

Vehicle identification number

Wialon: a plataforma única para necessidades diversas

Ulbotech T381

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Seja um parceiro

Solicite o Wialon na sua região