CARVIS MD-444SD

CARVIS MD-444SD
Fabricante: CARVIS
Forum Discussion

Número de unidades

12
ON-LINE
64
TOTAL
Features CARVIS MD-444SD:
  • 4G/LTE
  • Caixa preta
  • Suporte GLONASS

The following data should also be added to CARVIS MD-444SD unit properties section of Wialon GPS tracking software :

Device type: CARVIS MD-444SD
ID único: custom

Specify the following parameters in configuration software or configuration CARVIS MD-444SD for use in Wialon Hosting :

Porta do servidor: 22218

64 units of CARVIS MD-444SD device type are connected to Wialon Data Center. This represents 0.2% of all Video monitoring connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving type

driving_results

Driving results

video_alarm

Video alarm

video_signal_loss_alarm

Video signal loss alarm

video_signal_block_alarm

Video signal block alarm

memory_fault_alarm

Memory fault alarm

abnormal_driving_alarm

Abnormal driving alarm

veh_signal_status

Veh. signal status

user_msg

User mesage

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone