Skypatrol ST8050

Skypatrol ST8050
Fabricante: Skypatrol
Forum Discussion

Número de unidades

0
ON-LINE
0
TOTAL
Features Skypatrol ST8050:
  • Caixa preta
Supported in Wialon:
  • Sensores ADC
  • Suporte para barramento CAN
  • Sensores digitais
  • Comunicação via TCP

The following data should also be added to Skypatrol ST8050 unit properties section of Wialon GPS tracking software :

Device type: Skypatrol ST8050
ID único: serial

Specify the following parameters in configuration software or configuration Skypatrol ST8050 for use in Wialon Hosting :

Porta do servidor: 21412

0 units of Skypatrol ST8050 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

When connecting «Skypatrol ST8050» with TurnKey profile to Wialon obey the following rules:

1. When configuring messages in Add TurnKey profile the following fields are mandatory: «message count to message», «time to message», «modem ID to modem-originated message». Field «modem ID» value must be indicated in the first field «Unique ID» in unit properties in Wialon. Unlike fields decsribed below these fields need not be indicated in option «Messages format:» in unit properties in Wialon in «Device configuration» tab.

2. Other fields are optional. If they are selected when configuring messages in TurnKey profile they must be indicated in option «Messages format:» in unit properties in Wialon in «Device configuration» tab.

Add TurnKeyParameter name in option «Messages format:»
latitude to messagelat
longitude to messagelon
altitude to messagealt
speed to messagespd
heading to messagehdn
DIOs to messageio
Analog 0 to messageadc0
Analog 1 to messageadc1
Battery Power to messagebat
PULSE COUNT data to message

or

CAN data to message
cnters

or

can

These fields must be written in option "Messages format:" in the aforeindicated order.
ATTENTION!!! The order of parameters can not be changed.

«Messages format:» option content example when all the fields and impulse counters are selected:

lat,lon,alt,spd,hdn,io,adc0,adc1,bat,cnters

«Register raw data» option activation in «Device configuration» tab allows to view raw data received from the device.

TurnKey profile settings can be handled both by RS232 interface or by sending commands via SMS or Iridium.

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone