Meitrack TC68SG

Meitrack TC68SG
Fabricante: Meitrack
Forum Discussion

Número de unidades

28
ON-LINE
68
TOTAL
Features Meitrack TC68SG:
  • 3G
  • Boîte à mémoire
Supported in Wialon:
  • Capteurs analogique (ADC)
  • Gestion à distance via GPRS
  • Capteurs numériques
  • Gestion à distance par SMS
  • Bouton d’alarme
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Meitrack TC68SG unit properties section of Wialon GPS tracking software :

Device type: Meitrack TC68SG
ID único: imei

Specify the following parameters in configuration software or configuration Meitrack TC68SG for use in Wialon Hosting :

Porta do servidor: 21489

68 units of Meitrack TC68SG device type are connected to Wialon Data Center. This represents 0.1% of all OBD trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
RFID RFID code
code Event Code
valid GPS status
gsm GSM signal
hdop Horizontal Dilution of Precision
mileage Total accumulated mileage
engine_hours Total accumulated runtime Hours
ignition Ignition status
battery battery charge
pwr_ext Voltage of external power supply V
engine_rpm Engine rpm rpm
eng_load_calc Engine load calculation %
collant_temp Engine coolant temperature °C
fuel_consumption Fuel consumption L/100 km
intake_air_temp Intake air temperature Kpa
oil_pressure Oil pressure Kpa
atmos_pressure Atmospheric pressure Kpa
intake_pressure Intake-tube absolute pressure Kpa
air_flow Air flow g/s
throttle_pos Throttle position %
engine_mileage One mileage: from the engine start to stop meter
fuel_level Percentage of remain fuel %
system_flag

Bitwise parameter:
Bit 2 - ACC status: 1 - ACC is on, 0 - ACC is off
Bit 3 - anti-theft status: 1 - the device is in arming state, 0 - the
device is disarming state
Bit 4: 1 - the device is vibrating, 0 - the device is not vibrating
Bit 5: 1 - the device is moving, 0 - the device is not moving
Bit 6: 1 - an external power supply is connected, 0 - no external power supply
is connected
Bit 7: 1 - the device is charging, 0 - the device is not charging
Bit 8: 1 - the device is in sleep mode, 0 - the device is working normally

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone