Hardware for video monitoring JC400 | Integrated with Wialon

Features JC400:

4G/LTE

Supported in Wialon:

Vídeo de eventos
Gerenciamento remoto via GPRS
Transmissão ao vivo
Salvamento manual de vídeo
Reprodução de arquivos
Gerenciamento remoto via SMS
Comunicação via TCP

The following data should also be added to JC400 unit properties section of Wialon GPS tracking software :

Device type:	JC400
ID único:	imei

Specify the following parameters in configuration software or configuration JC400 for use in Wialon Hosting :

Porta do servidor:

22049

2614 units of JC400 device type are connected to Wialon Data Center. This represents 8.03% of all Video monitoring connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm_type	128 (0x80) Vibration 134 (0x86) SD card cannot be recognized 136 (0x88) Power removal 137 (0x87) Over speed 144 (0x90) Harsh acceleration 145 (0x91) Harsh deceleration 146 (0x92) Harsh turning 147 (0x93) Crash 1 (0x01) SOS 138 (0x8A) Oil or electronics connected 139 (0x8B) Oil or electronics disconnected 71 (0x47) Fatigue driving 105 (0x69) File uploading 106 (0x70) SD card mount 83 (0x53) Fuel stolen 115 (0x73) Fuel data timeout 118 (0x76) Temperature data timeout 14 (0x0E) External battery low 165 (0xA5) RFID reading 140 (0x8C) DMS – Eye closed 143 (0x8F) DMS - Distraction 160 (0xA0) DMS - Yawn 154 (0x9A) DMS - Smoking 151 (0x97) DMS - Phone calling 148 (0x94) DMS - Missing face 161 (0xA1) DMS - Monitoring shelter 162 (0xA2) DMS – Calibration fail 163 (0xA3) DMS - Look down
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage_lvl	The range is 0~6 defining the voltage is from low to high. 0: No Power (shutdown) 1: Extremely Low Battery 2: Very Low Battery 3: Low Battery 4: Medium 5: High 6: Very High
gsm	GSM Signal Strength Levels 0: no signal; 1: extremely weak signal; 2: very weak signal; 3: good signal; 4: strong signal.
tr_status	Bitmask representing different terminal statuses. Bit7 1:Oil/Electricity cutoff 0:Oil/Electricity on Bit6 0: GPS tracking is off 1: GPS tracking is on Bit3~Bit5 Extended bit Bit2 0: Charge Off 1: Charge On Bit1 1: ACC high 0: ACC Low Bit0 0: Disarm 1:Arm
acc	1: ACC high 0: ACC Low
up_mode	Data Upload Mode: (could be only one mode available) 0 upload by time interval 1 upload by distance 2 upload for corner correction 3 upload by ACC status change 4 Re-upload last valid locating point after shift from dynamic motion to static position 5 Report last valid locating point after network reconnected. 6 Update the ephemeris to upload locating point. 7 Press to upload locating point 8 Power on to upload locating point 9 Power on and change locating point by GPS based station.
protocol_number	Type - Value Login Message - 1 (0x01) Status information (Heartbeat) - 19 (0x13) Location Data Packet - 34 (0x22) Alarm Data Packet - 149 (0x95) Command information sent by the server to the terminal - 128 (0x80)
fuel_sensor_id	ID of the fuel sensor
fuel_sensor_value	Value of the fuel sensor
fuel_sensor_units	Units for fuel sensor value: 01 - Height 02 - Percentage 03 - Voltage

How to use JC400 in Wialon

All video features are available for the following FW version and higher: KMC28_JC400_WABA_STD_V4.3.2_220328.1750

Preencha um formulário de solicitação para começar

Produtos

Produtos de nicho para tarefas específicas

JC400

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Seja um parceiro

Solicite o Wialon na sua região

Preencha um formulário de solicitação para começar