| param_id_# |
Parameter value
|
|
| event_# |
Event
|
|
| alarm_flag |
Alarm flag (Bits1-32): Bit1: 1: Emergency alarm, trigger after triggering alarm switch Bit2: 1: Over speed alarm Bit3: 1: Driving alarm malfunction Bit4: 1: Risk warning Bit5: 1: GNSS module malfunction Bit6: 1: GNSS antenna was notconnected or cut Bit7: 1: GNSS antenna short circuited Bit8: 1: The terminal main power undervoltage Bit9: 1: The terminal main power is turned off Bit10: 1: Terminal LCD or displaymalfunction Bit11: 1: TTS module malfunction Bit12: 1: Camera malfunction Bit13: 1: Road transportcertificate IC card module malfunction Bit14: 1: Over speed warning Bit15: 1: Fatigue driving warning Bit16-Bit18: Reserve Bit19: 1: The accumulated overspeed driving time of the day Bit20: 1: Timeout parking Bit21: 1: Enter and exit the area Bit22: 1: Enter and exit the route Bit23: 1: The driving time of theroute is not enough/too long Bit24: 1: Off track alarm Bit25: 1: Vehicle VSS malfunction Bit26: 1: Abnormal fuel capacityof vehicle Bit27: 1: The vehicle is stolen(through vehicle burglar alarm) Bit28: 1: Illegal ignition of vehicle Bit29: 1: Illegal displacement ofvehicle Bit30: 1: Collision warning Bit31: 1: Rollover warning Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)
|
|
| state_flag |
Status (Bits 1-32): Bit1: 0: ACC off; 1: ACC on Bit2: 0: Not positioning; 1: Positioning Bit3: 0: North latitude; 1: South latitude Bit4: 0: East longitude; 1: West longitude Bit5: 0: Running status; 1: Stop running status Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1: Latitude and longitude are encrypted by secret plug-ins Bit7-Bit8: Reserve Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load (It can be used for empty/heavy passenger car and empty/full load status of the truck, manual input or sensor acquisition) Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked Bit14: 0: Door 1 close; 1: Door 1 open (front door) Bit15: 0: Door 2 close; 1: Door 2 open (middle door) Bit16: 0: Door 3 close; 1: Door 3 open (back door) Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat) Bit18: 0: Door 5 close; 1: Door 5 open (user-defined) Bit19: 0: No GPS positioning; 1: GPS positioning Bit20: 0: No Beidou positioning; 1: Beidou positioning Bit21: 0: No GLONASS positioning; 1: GLONASS positioning Bit22: 0: No Galileo positioning; 1: Galileo positioning Bit23-32: Reserve
|
|
| odometer |
Odometer
|
|
| fuel_volume |
Fuel volume
|
|
| speed_drvng_rec |
Speed driving rec
|
|
| alarm_event_id |
Alarm event ID
|
|
| overspeed_alarm |
Overspeed alarm
|
|
| position_type |
Position type
|
|
| section_id |
Section ID
|
|
| route_alarm |
Route alarm
|
|
| direction |
Direction
|
|
| driving_time_alarm |
Driving time alarm
|
|
| driving_time |
Driving time
|
|
| driving_results |
Driving results
|
|
| video_alarm |
Video related alarm Bit 1 Video signal loss alarm Bit 2 Video signal occlusion alarm Bit 3 Storage unit failure alarm Bit 4 Other video equipment failure alarm Bit 5 Over passengers alarm Bit 6 Abnormal driving behavior alarm Bit 7 Special alarm recording reaches the storage threshold alarm Bit 8-32 Reserved |
|
|
| video_signal_loss_alarm |
Video signal loss alarm status (Bits 1-32), bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 means the video channel is lost.
|
|
| video_signal_block_alarm |
The video signal blocks the alarm state (Bits 1-32) bit1-bit32 respectively indicate the 1~32 logical channels, and the corresponding bit is 1 indicates that the video channel is blocked by the video channel.
|
|
| memory_fault_alarm |
Memory fault alarm status (Bits 1-16), bit1-bit12 respectively indicate the 1~12 main memory, bit13-bit16 respectively indicate the 1~4 disaster recovery storage devices, and the corresponding bit is 1 means the memory is faulty.
|
|
| abnormal_driving_alarm |
Abnormal driving alarm (Bits 1-16) Bit1：fatigue; Bit2：call; Bit3：smoking;
|
|
| veh_signal_status |
Veh. signal status
|
|
| user_msg |
User mesage
|
|
| veh_stat |
Vehicle status, the same as state_flag
|
|
| info_id |
Additional information ID - 0x64 - driving assist warning information
- 0x65 - driver behavior monitoring function warning information
- 0x70 - violent driving warning information
- 0x14 - Video-related alarm
- 0x15 - Video signal loss alarm
- 0x16 - Video signal blockage alarm
- 0x17 - Memory fault alarm
- 0x18 -Driving behavior alarm
|
|
| alm_time |
Alarm time threshold
|
sec |
| alm_thre1 |
Warning threshold 1 When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.
|
|
| alm_thre2 |
Warning threshold 2 This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.
|
|
| workstate |
Workstate, 0x01: normal work 0x02: standby mode 0x03: Upgrade maintenance 0x04: Device is abnormal 0x10: Disconnect
|
|
| alarm_status |
Alarm status, bits(1-32) Bitwise setting: 0 means no, 1 means yes bit1: cameraabnormal bit2: Main memory exception bit3: Auxiliary memory exception bit4: Infrared fill light is abnormal bit5: abnormal speaker bit6: Abnormal battery bit7~bit10:reserved bit11: Communication module error bit12: The positioning module is abnormal bit13~bit32:reserved
|
|
| alm_lvl |
Warning level: - 0x01: Level 1 warning
- 0x02: Level 2 warning
|
|
| alm_id |
According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.
|
|
| sign_stat |
Sign status. - 0x00: Not available
- 0x01: Start sign
- 0x02: End sign
This field is only applicable to warnings or events with start and end sign types.
|
|
| veh_ah_spd |
Leading vehicle speed. Range: 0~250, valid only when warning types are 0x01 and 0x02, and fill in 0x00 when not available.
|
km/h |
| veh_ah_dst |
Leading car/pedestrian distance
|
|
| dev_type |
Deviation type: - 0x01: Left deviation
- 0x02: Right deviation
- Only valid when warning type is 0x02, fill in 0x00 when unavailable.
|
|
| road_sign_t |
Road sign type - 0x01: Speed limit sign
- 0x02: Height limit sign
- 0x03: Weight limit sign
- Only valid when warning types are 0x06 and 0x10; fill in 0x00 when not available.
|
|
| road_sign_d |
Road sign data. Data identified on road signs, fill in 0x00 when unavailable.
|
|
| fat_deg |
Fatigue degree. Range 1~10. The larger the value, the more severe the fatigue. Only valid when warning type is 0x01, fill in 0x00 when unavailable. |
|
| iccid |
SIM Card ICCID Number
|
|
| pwr_ext |
External
voltage
|
V |
| pwr_int |
Internal power
|
V |
| tkstar_light_alarm |
0 see light
1
see no light
|
|
| result |
Terminal universal reply: 0: success/confirmation;
1: Failure;
2: Wrong message;
3: No support;
4: alarm confirmation and processing.
|
|
| alm_type |
Note: parameters are registered in DEC in Wialon, so you need to
convert value from this table from HEX to DEC before checking values in
Wialon. For example, to check information about the 0x11: Driver change
event with info_id = 0x64, you need to use values alm_type=17,
info_id=101. You can try to filter Messages by following parameters or
use them in sensors.
Alarm type if info_id = 100 (0x64):
DEC (HEX): Definition
1 (0x01): Forward collision warning
2 (0x02): Lane departure warning
3 (0x03): Overly close vehicle warning
4 (0x04): Pedestrian collision warning
5 (0x05): Frequent lane change warning
6 (0x06): Exceeding road sign warning
7 (0x07): Obstacle warning
8 (0x08): Driver Assist Function Failure Warning
9~15 (0x09~0x0F): User customization
16 (0x10): Road sign identification event
17 (0x11): Active capture event
18~255 (0x12~0xFF): User customization
Alarm type if info_id = 101 (0x65):
DEC (HEX): Definition
1 (0x01): Fatigue driving warning
2 (0x02): Calling on hand-held mobile phone warning.
3 (0x03): Smoking warning
4 (0x04): Long time without looking ahead warning.
5 (0x05): No driver detected warning.
6 (0x06): Both hands leave steering wheel warning
7 (0x07): Driver behavior monitoring function failure warning
8~15 (0x08~0x0F): User customization
16 (0x10): Automatic capture event
17 (0x11): Driver change event
18~255 (0x12~0xFF): User customization
Alarm type if info_id = 112 (0x70):
DEC(HEX): Definition
1 (0x01): Sharp acceleration warning
2 (0x02): Sharp deceleration warning
3 (0x03): Sharp turn warning
4 (0x04): Idle speed warning
5 (0x05): Abnormal flameout warning
6 (0x06): Neutral taxi warning
7 (0x07): Engine overrunning warning
18~255 (0x12~0xFF): User customization
|
|
| deep_sleep |
Deep sleep state (IO status bit 0): 0: No 1: Deep sleep
|
|
| sleep |
Sleep state (IO status bit 1): 0: No 1: Sleep
|
|
| can_avg_fuel_consumption |
CAN: average fuel consumption, miles per gallon
|
MPG |
| can_inst_fuel_consumption |
CAN: instantaneous fuel consumption, miles per gallon
|
MPG |
| can_total_fuel_used |
CAN: total fuel consumption, gallons
|
gal |
| can_engine_oil_level |
CAN: engine oil level
|
% |
| can_battery_voltage |
CAN: battery voltage
|
V |
| can_brake_pedal |
CAN: brake pedal status: 0: Not pressed 1: Pressed
|
|
| can_coolant_temp |
CAN: engine coolant temperature
|
°C |
| can_engine_time |
CAN: engine runtime since current ignition cycle
|
s |
| can_engine_total_time |
CAN: accumulated engine runtime since vehicle manufacture
|
s |
| can_engine_load |
CAN: calculated engine load
|
% |
| can_engine_state |
CAN: engine status: 0: Off 1: Running
|
|
| can_engine_rpm |
CAN: engine RPM
|
rpm |
| can_gear |
CAN: gear position: 0: N 1: D 2: R 3: Other
|
|
| can_high_beam |
CAN: high beam status: 0: Off 1: On
|
|
| can_intake_airflow |
CAN: intake airflow
|
g/s |
| can_ignition |
CAN: ignition status: 0: Off 1: On
|
|
| can_total_mileage |
CAN: total mileage, miles
|
mi |
| can_trip_mileage |
CAN: single-trip mileage, miles
|
mi |
| can_oil_pressure |
CAN: oil pressure
|
kPa |
| can_speed |
CAN: vehicle speed, miles per hour
|
mph |
| can_steering_angle |
CAN: steering wheel angle
|
° |
| can_throttle_position |
CAN: throttle pedal position
|
% |
| can_steering |
CAN: steering: 0: None 1: Left 2: Right
|
|
| can_moving |
CAN: vehicle driving status: 0: Stopped 1: In motion
|
|
| can_vin |
CAN: vehicle identification number (VIN)
|
|
| can_hdop |
CAN: positioning horizontal accuracy factor
|
|
| can_time |
CAN: UTC time (Unix time, seconds)
|
|
| work_status |
Device working status: 0: Normal working status 1: Delay shutdown status
|
|
| custom_info_fc |
Custom additional information 0xFC, raw HEX
|
|
| custom_info_fd |
Custom additional information 0xFD, raw HEX
|
|
| custom_info_ff |
Custom additional information 0xFF, raw HEX
|
|
