Персональный GPS трекер Queclink GT200

Особенности Queclink GT200:

Наличие черного ящика

Поддержано в Wialon:

Управляющие команды по GPRS
LBS
Управляющие команды по SMS
Связь через TCP

Для того чтобы система мониторинга Wialon корректно идентифицировала данные от Queclink GT200 в диалоге настроек объекта, укажите следующие данные :

Тип устройства:	Queclink GT200
Уникальный ID:	imei

Укажите следующие параметры в конфигурационной программе или в конфигурации Queclink GT200 для использования его в Wialon Hosting :

Порт сервера:

20408

Всего в серверном центре Wialon используется 0 объектов Queclink GT200 — это составляет 0% от общего количества устройств в категории «Персональные трекеры».

График изменения количества подключений в серверном центре Wialon за последние 30 дней:

Имя параметра	Описание	Единицы измерения
battery	Battery level	%
ber	The quality of GSM signal
charger	Whether the battery is charging when the external power supply is connected: 0: Not charging 1: Charging
charging	Whether the battery is charging when the external power supply is connected: 0: Not charging 1: Charging
external_pwr	External power supply: 0: Not connected 1: Connected
flash_type	A numeric to indicate what the type of flash is: 0: SST flash 1: NMX flash
gps_antenna_type	A numeric to indicate which GPS antenna is working now 0: inside GPS antenna
gps_on_need	Whether to close GPS chip after retrieving GPS position information: 0: Never close GPS chip 1: Close GPS chip after retrieving GPS information every time 2: Never close GPS chip only in ignition on state or movement state 3: Never open GPS chip
gsm_level	The GSM signal strength level
gsm_quality	The quality of GSM signal
hdop	Horizontal Dilution of Precision
ign	Ignition state: 0: off, 1: on
ign_off_duration	Duration since last time the ignition is off	s
ign_on_duration	Duration since last time the ignition is on	s
led_on	The working mode of LEDs
mileage	The total mileage	km
movement_cause	The enter movement cause defines the factor who triggers the message: 0: Triggered by motion sensor detection. It is defaulted 1: Triggered by RTO sub command RTL 2: Triggered by the command GTLSW from EBK
movement_state	0: The state of the device changed from motion to rest 1: The state of the device changed from rest to motion
odo_mileage	The total mileage in the position	km
pwr_int	Battery voltage	V
report_type	Message type
rssi	The GSM signal strength level
state	The current motion state of the device: 21: The device attached vehicle is ignition on and motionless 22: The device attached vehicle is ignition on and moving 41: The device is motionless without ignition on 42: The device is moving without ignition on
temp_int	The temperature of the device	°C

Имя параметра

Описание

Единицы измерения

battery

Battery level

ber

The quality of GSM signal

charger

Whether the battery is charging when the external power supply is connected:
0: Not charging
1: Charging

charging

Whether the battery is charging when the external power supply is connected:
0: Not charging
1: Charging

external_pwr

External power supply:
0: Not connected
1: Connected

flash_type

A numeric to indicate what the type of flash is:
0: SST flash
1: NMX flash

gps_antenna_type

A numeric to indicate which GPS antenna is working now
0: inside GPS antenna

gps_on_need

Whether to close GPS chip after retrieving GPS position information:
0: Never close GPS chip
1: Close GPS chip after retrieving GPS information every time
2: Never close GPS chip only in ignition on state or movement state
3: Never open GPS chip

gsm_level

The GSM signal strength level

gsm_quality

The quality of GSM signal

hdop

Horizontal Dilution of Precision

ign

Ignition state: 0: off, 1: on

ign_off_duration

Duration since last time the ignition is off

ign_on_duration

Duration since last time the ignition is on

led_on

The working mode of LEDs

mileage

The total mileage

movement_cause

The enter movement cause defines the factor who triggers the message:
0: Triggered by motion sensor detection. It is defaulted
1: Triggered by RTO sub command RTL
2: Triggered by the command GTLSW from EBK

movement_state

0: The state of the device changed from motion to rest
1: The state of the device changed from rest to motion

odo_mileage

The total mileage in the position

pwr_int

Battery voltage

report_type

Message type

rssi

The GSM signal strength level

state

The current motion state of the device:
21: The device attached vehicle is ignition on and motionless
22: The device attached vehicle is ignition on and moving
41: The device is motionless without ignition on
42: The device is moving without ignition on

temp_int

The temperature of the device

°C

Заполните заявку для начала работы с Wialon