Queclink GL33CG

Queclink GL33CG
Discusión en el foro

Cantidad de unidades

1
En línea
2
Total
Características Queclink GL33CG:
  • 2G

Para que el sistema de rastreo Wialon identifique los datos de Queclink GL33CG en el diálogo de configuración de la unidad, indique los siguientes datos :

Tipo de dispositivo: Queclink GL33CG
ID único: custom

Indique los siguientes parámetros en el programa de configuración o en la configuración Queclink GL33CG para utilizarlos en Wialon Hosting :

Puerto del servidor: 22682

En el centro de servicio Wialon se utilizan 2 unidades Queclink GL33CG — es 0% de la cantidad total de dispositivos Automóvil conectados.

La gráfica representa la cantidad de conexiones en el centro de servicio Wialon en los últimos 30 días:

Nombre del parámetro Descripción Unidades de medida
msg_type_name

Report type of the message

buffer

Shows if the message was buffered
+BUFF header = buffer: 1

+RESP header = buffer: 0

mcc[NUM]

Mobile country code of the base station [NUM]

mnc[NUM]

Mobile Network code of the base station [NUM]

lac[NUM]

Location area code of the base station [NUM]

cell_id[NULL]

Cell tower ID of the base station [NUM]

rep_id
  • +RESP:GTGEO: indicates the ID of the Geo-Fence.
  • For other messages, it is always 0.
rep_type

rep_type has several meanings for the different packages

  • +RESP:GTNMR
    • 0 - The state of the device changes from motion to rest.
    • 1 - The state of the device changes from rest to motion.
  • +RESP:GTGEO
    • 0 - Exit the corresponding Geo-Fence.
    • 1 - Enter the corresponding Geo-Fence.
  • +RESP:GTDOG
    • 1 - Reboot device message for time based working mode.
    • 2 - Reserved
    • 3 - Reserved
    • 4 - Reboot device message for network watchdog
    • 5 - Reboot device message for EGPRS/LTE watchdog
    • 6 - Reboot device message for send failure watchdog
  • +RESP:GTFRI
    • Always 0 - This message is a common scheduled position report.

battery

The current volume of the battery in percentage.

%
rf_radio_status

Indicate status of the RF radio

  • 0 - RF433 is off
  • 1 - RF433 is on

rf_channel_freq

A number to indicate the transmit channel frequency of the RF433.

MHz
rat

Radio Access Technology.

  • 0 - NO SERVICE mode
  • 1 - EGPRS mode
  • 2 - Reserved
  • 3 - Reserved
  • 4 - LTE Cat1 mode

band
  • 0 means invalid band
  • 1-5/7-8/20/28 mean band number, and others mean GSM number.
motion_status

The current motion status of the device

  • 0x41 (Sensor Rest) - The device attached vehicle is motionless without ignition signal detected.
  • 0x42 (Sensor Motion) - The device attached vehicle is moving without ignition signal detected.

iccid

The ICCID of the SIM card.

rx_level

The signal strength level

  • For 2G/3G network
rx_level ⠀⠀⠀Signal Strength (dBm)
0 < -113
1 -111
2 - 30 -109 - -53
31 > -51
99 Unknown



  • For 4G Network
rx_level ⠀⠀⠀Signal Strength (dBm)
0 < -140
1 -140
2 - 96 -139 - -44
97 > -44
255 Unknown

rx_ber

The quality of the GSM signal. The range is 0-7, and 99 is for unknown strength of signal

network_type

The type of the mobile network the device is currently registered on.

  • 0 - Unregistered
  • 1 - EGPRS
  • 2 - Reserved
  • 3 - LTE

backup_battery_pwr

The voltage of the backup battery. The value of this field is valid only when the external power is not connected.

V
charge

Whether the backup battery is charging when the main power supply is connected.

  • 0 - Not charging.
  • 1 - Charging.

led_state

A numeral to indicate the working status of all LED lights.

  • 1 - All LEDs turn on as configured.
  • 2 - All LEDs work 5 minutes after powering on and then will be off. And all LEDs will work 5 minutes again after the power key is pressed shorter than 2 seconds.

last_fix_tm

The UTC time of the latest successful GNSS fix.

It has following format: HH:MM:SS DD/MM/YYYY

time_zone

Time zone offset from the UTC-0 Time

minutes
daylight_saving

The current setting of the daylight saving.

  • 0 - Daylight saving is disabled.
  • 1 - Daylight saving is enabled.

device_type

The type of the device

fw_ver

Firmware Version

hw_ver

Hardware Version

network_tm_check

A numeral to indicate whether to check GNSS UTC time with network time.

  • 0 - Only correct device time when the device can't get GNSS UTC time.
  • 1 - Always correct device time with network time.

total_packets

Total packets of GTALM packages

current_packet

Current packet of GTALM package

alm

The full configuration of the device from +RESP:GTALM

call_num

The phone number of the incoming call which triggers the report message.

report_composition_mask

Bitwise mask to configure the composition of a report message, especially the composition of GNSS information.

  • Bit 0 - for <Speed>
  • Bit 1 - for <Azimuth>
  • Bit 2 - for <Altitude>
  • Bit 3 - for Cell information, including <MCC>, <MNC>, <LAC>, <Cell ID>.
  • Bit 4 - for <Send Time>, the time when the report message is generated.
  • Bit 5 - for <Device Name>

For each bit, set it to 1 to enable the corresponding component in the report, and 0 to disable the corresponding component in the report. This mask is valid for all report messages. Bit3 is invalid for the +RESP:GTGSM message.

sv_[ID]

Satellite power of satellite [ID]. If there is no satellite, the field is filled with zero

fix_type

A string to indicate what kind of GNSS fix this cell information is for.

  • "RTL": This cell information is for RTL request.
  • "FRI": This cell information is for FRI request.
  • "GIR": This cell information is for the sub command "F" in the (AT+GTRTO) command.

upd_code | eud_code

+RESP:GTUPD

It indicates the download information.

  • 1x0 - The update command is confirmed by the device.
  • 1x1 - The update command is refused by the device.
  • 1x2 - The update process is cancelled by the backend server or refused because of an incorrect URL.
  • 1x3 - The update process is refused because the external power supply is not inserted.
  • 1x4 - Reserved.
  • 1x5 - The update process is refused because the upgraded unit is not working.
  • 2x0 - The device starts to download the package.
  • 2x1 - The device finishes downloading the package successfully.
  • 2x2 - The device fails to download the package.
  • 3x0 - The device starts to update the firmware.
  • 3x1 - The device finishes updating the firmware successfully.
  • 3x2 - The device fails to update the firmware.
  • 3x3 - The update process does not start because the battery is low.
  • 3x4 - Serial Number does not match, firmware upgrade fails.

+RESP:GTEUD

  • 1x0 - The device confirms this update command.
  • 1x1 - The device refuses this update command.
  • 1x2 - The backend server cancels this update process.
  • 1x3 - The device refuses this request because the battery is low.
  • 1x4 - The update process is refused because the upgraded unit is not working.
  • 2x0 - The device starts to download the package.
  • 2x1 - The device downloads the package successfully.
  • 2x2 - The device fails to download the package.
  • 3x0 - The device starts to update the firmware.
  • 3x1 - The device updates the firmware successfully.
  • 3x2 - The device fails to update the firmware.
  • 3x3 - The device cancels the firmware update because the battery is low.
  • 3x4 - Serial Number does not match, firmware upgrade fails.

download_times

The count number of the package download.

jamming_status

The current jamming status of the device.

  • 1 - Quit the jamming state.
  • 2 - Enter the jamming state.

battery_pwr

Battery Voltage

V
alm_type

The type of temperature alarm.

  • 1 - The current temperature is lower than the lower temperature limit defined by <Min Temperature>.
  • 2 - The current temperature is within the temperature threshold range specified by <Min Temperature> and <Max Temperature>.
  • 3 - The current temperature is higher than the higher temperature limit defined by <Max Temperature>.

temp

The current temperature of the device.

mode

The working mode of file transfer

  • 0 - Download file

protocol_type

The type of communication protocol used to obtain data from the backend server

  • 0 - HTTP

file_type

It defines the type of file to download from the server.

  • 0 - CA certificate
  • 1 - Client certificate
  • 2 - Client key


rtp_code

It indicates the download information.

  • 100 - The update command is starting.
  • 101 - The update command is refused by the device.
  • 200 - The device starts to download the file.
  • 201 - The device finishes downloading the file successfully.
  • 202 - The device fails to download the file.
  • 301 - The device finishes updating the file successfully.
  • 302 - The device fails to update the file

ident_num

Identifier Number

A numeral to identify the firmware update request. It will be included in the +RESP:GTEUD message to indicate the request it is related to.

dev_type

Device type: Always 0x128 for Queclink GL33CG

gps_acc

GNSS Accuracy

A numeral to indicate the GNSS fix status and HDOP of the GNSS position.

  • 0 means the current GNSS fix fails and the last known GNSS position is used.
  • A non-zero value (1 - 50) means the current GNSS fix is successful and represents the HDOP of the current GNSS position.

Otros dispositivos del fabricante

Contacte con Wialon y logre los objetivos más ambiciosos con la telemática

Por favor, llene la solicitud para iniciar el trabajo con Wialon

Paso 1
Paso 2
Paso 3
Nombre de pila*
Apellido*
Compañía*
Email*
Teléfono