Asset GPS tracker Concox JM-LL01 | Integrated with Wialon

Features Concox JM-LL01:

4G/LTE
Boîte à mémoire
Installation magnétique
Wi-Fi positioning

Supported in Wialon:

Gestion à distance via GPRS
Gestion à distance via SMS
Modification du paramètre "speed"
Communication via TCP
Communication via UDP

The following data should also be added to Concox JM-LL01 unit properties section of Wialon GPS tracking software :

Device type:	Concox JM-LL01
ID único:	imei

Specify the following parameters in configuration software or configuration Concox JM-LL01 for use in Wialon Hosting :

Porta do servidor:

21971

2604 units of Concox JM-LL01 device type are connected to Wialon Data Center. This represents 1.96% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
pwr_ext	Voltage level	V
gsm	GSM Signal Strength
imei	imei number
imsi	imsi number
iccid	iccid number
time	Time stamp
sats	Number of satellites
visible_sats	Visible satellites
sat#_signal_strength	Satellites signal strength, where # - number
mcc	LBS Main Cell Tower, mcc
mnc	LBS Main Cell Tower, mnc
lac	LBS Main Cell Tower, lac
cell_id	LBS Main Cell Tower, cell_id
rssi	LBS Main Cell Tower, rssi
lac#	LBS Auxiliary Cell Tower, lac, where # - number
cell_id#	LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi#	LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
hdop	HDOP
sequence_num	Sequence Number
inputs	Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason	Boot Reason
mileage	Mileage statistics
real_time_mode#	Real time current mode, where # - number
static_parameter_mode#	Static mode parameter, where # - number
land_transport_mode#	Land transportation mode, where # - number
sea_transport_mode#_1	Sea transportation mode parameter 1, where # - number
sea_transport_mode#_2	Sea transportation mode parameter 2, where # - number
is_geofence_rectangular#	Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit#	Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code	Report status: Status code 0 Upload in fixed time interval 1 Upload by distance interval 2 Inflection point upload 3 ACC status upload 4 Re-upload the last GPS point when back to static. 5 Upload the last effective point when network recovers. 6 Update ephemeris and upload GPS data compulsorily 7 Upload location when side key triggered 8 Upload location after power on 9 Unused 10 Upload the last longitude and latitude when device is static; time updated 13 Upload the last longitude and latitude when device is static 14 Gpsdup upload (Upload regularly in a static state.) 16 Door Open 17 Door Close 18 Removal 19 Installation 20 Enter Geofence 21 Exit Geofence 22 Environment Abnormal 23 Switch to sea transportation mode 24 Switch to land transportation mode 25 Switch to static mode 26 Low internal battery 27 Overspeed 28 Power ON 29 Power OFF 30 Enter GPS blind area 31 Exit GPS blind area 32 Vibration 33 External power cut off 34 Low internal battery shutdown 35 Device casing is opened
status_trig_time1	Report status: Trigger time
status_reg_content	Report status: Trigger content
gps_time_status	GPS is Real Time or Reupload
alm1	Alarm Bit 1
alm2	Alarm Bit 2
alm3	Alarm Bit 3
sta1	Status Bit 1
dyd	Fuel/Electricity Cutoff Status
sos_num#	SOS number, where # - number
center_num	Centre number
fence	GeoFence
mode	MODE
door	Door status
cit	Content of Terminal Information (heartbeat msg)

Parameter name

Description

Units

pwr_ext

Voltage level

gsm

GSM Signal Strength

imei

imei number

imsi

imsi number

iccid

iccid number

time

Time stamp

sats

Number of satellites

visible_sats

Visible satellites

sat#_signal_strength

Satellites signal strength, where # - number

mcc

LBS Main Cell Tower, mcc

mnc

LBS Main Cell Tower, mnc

lac

LBS Main Cell Tower, lac

cell_id

LBS Main Cell Tower, cell_id

rssi

LBS Main Cell Tower, rssi

lac#

LBS Auxiliary Cell Tower, lac, where # - number

cell_id#

LBS Auxiliary Cell Tower, cell_idm, where # - number

rssi#

LBS Auxiliary Cell Tower, rssi, where # - number

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

hdop

HDOP

sequence_num

Sequence Number

inputs

Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

boot_reason

Boot Reason

mileage

Mileage statistics

real_time_mode#

Real time current mode, where # - number

static_parameter_mode#

Static mode parameter, where # - number

land_transport_mode#

Land transportation mode, where # - number

sea_transport_mode#_1

Sea transportation mode parameter 1, where # - number

sea_transport_mode#_2

Sea transportation mode parameter 2, where # - number

is_geofence_rectangular#

Circular o rectangular, 0 is circular, 1 is rectangular, where # - id

is_geofence_exit#

Enter or Exit geofence, 1 is enter, 2 is exit, where # - id

status_code

Report status: Status code
0 Upload in fixed time interval
1 Upload by distance interval
2 Inflection point upload
3 ACC status upload
4 Re-upload the last GPS point when back to static.
5 Upload the last effective point when network recovers.
6 Update ephemeris and upload GPS data compulsorily
7 Upload location when side key triggered
8 Upload location after power on
9 Unused
10 Upload the last longitude and latitude when device is static; time updated
13 Upload the last longitude and latitude when device is static
14 Gpsdup upload (Upload regularly in a static state.)
16 Door Open
17 Door Close
18 Removal
19 Installation
20 Enter Geofence
21 Exit Geofence
22 Environment Abnormal
23 Switch to sea transportation mode
24 Switch to land transportation mode
25 Switch to static mode
26 Low internal battery
27 Overspeed
28 Power ON
29 Power OFF
30 Enter GPS blind area
31 Exit GPS blind area
32 Vibration
33 External power cut off
34 Low internal battery shutdown
35 Device casing is opened

status_trig_time1

Report status: Trigger time

status_reg_content

Report status: Trigger content

gps_time_status

GPS is Real Time or Reupload

alm1

Alarm Bit 1

alm2

Alarm Bit 2

alm3

Alarm Bit 3

sta1

Status Bit 1

dyd

Fuel/Electricity Cutoff Status

sos_num#

SOS number, where # - number

center_num

Centre number

fence

GeoFence

mode

MODE

door

Door status

cit

Content of Terminal Information (heartbeat msg)

Preencha um formulário de solicitação para começar

Produtos

Produtos de nicho para tarefas específicas

Concox JM-LL01

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Seja um parceiro

Solicite o Wialon na sua região

Preencha um formulário de solicitação para começar