Concox JM-LL01

Concox JM-LL01
Manufacturer: Jimi IoT (Concox)
Forum Discussion

Number of units

548
Online
4449
Total
Features Concox JM-LL01:
  • 4G/LTE
  • Blackbox
  • Magnetic mounting
  • Wi-Fi positioning
Supported in Wialon:
  • Remote management via GPRS
  • Remote management via SMS
  • Modification of the "speed" parameter
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Concox JM-LL01 unit properties section of Wialon GPS tracking software :

Device type: Concox JM-LL01
Unique ID: imei

Specify the following parameters in configuration software or configuration Concox JM-LL01 for use in Wialon Hosting :

Server port: 21971

4449 units of Concox JM-LL01 device type are connected to Wialon Data Center. This represents 3.33% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
pwr_ext Voltage level V
gsm GSM Signal Strength
imei imei number
imsi imsi number
iccid iccid number
time Time stamp
sats Number of satellites
visible_sats Visible satellites
sat#_signal_strength Satellites signal strength, where # - number
mcc LBS Main Cell Tower, mcc
mnc LBS Main Cell Tower, mnc
lac LBS Main Cell Tower, lac
cell_id LBS Main Cell Tower, cell_id
rssi LBS Main Cell Tower, rssi
lac# LBS Auxiliary Cell Tower, lac, where # - number
cell_id# LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi# LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq GSM Signal CSQ
battery_vol Battery Voltage
hdop HDOP
sequence_num Sequence Number
inputs Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason

Boot Reason


mileage Mileage statistics
real_time_mode# Real time current mode, where # - number
static_parameter_mode# Static mode parameter, where # - number
land_transport_mode# Land transportation mode, where # - number
sea_transport_mode#_1 Sea transportation mode parameter 1, where # - number
sea_transport_mode#_2 Sea transportation mode parameter 2, where # - number
is_geofence_rectangular# Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit# Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code

Report status: Status code
0 Upload in fixed time interval
1 Upload by distance interval
2 Inflection point upload
3 ACC status upload
4 Re-upload the last GPS point when back to static.
5 Upload the last effective point when network recovers.
6 Update ephemeris and upload GPS data compulsorily
7 Upload location when side key triggered
8 Upload location after power on
9 Unused
10 Upload the last longitude and latitude when device is static; time updated
13 Upload the last longitude and latitude when device is static
14 Gpsdup upload (Upload regularly in a static state.)
16 Door Open
17 Door Close
18 Removal
19 Installation
20 Enter Geofence
21 Exit Geofence
22 Environment Abnormal
23 Switch to sea transportation mode
24 Switch to land transportation mode
25 Switch to static mode
26 Low internal battery
27 Overspeed
28 Power ON
29 Power OFF
30 Enter GPS blind area
31 Exit GPS blind area
32 Vibration
33 External power cut off
34 Low internal battery shutdown
35 Device casing is opened

status_trig_time1 Report status: Trigger time
status_reg_content Report status: Trigger content
gps_time_status GPS is Real Time or Reupload
alm1

Alarm Bit 1

bit7 Vibration Alarm 1 ON 0 OFF
bit6 Network Alarm 1 ON 0 OFF
bit5 Phone Alarm 1 ON 0 OFF
bit4 SMS Alarm 1 ON 0 OFF
bit3 Displacement Alarm 1 ON 0 OFF
bit2 Network Alarm 1 ON 0 OFF
bit1 Phone Alarm 1 ON 0 OFF
bit0 SMS Alarm 1 ON 0 OFF


alm2

Alarm Bit 2

bit7 Low Internal Battery Alarm 1 ON 0 OFF
bit6 Network Alarm 1 ON 0 OFF
bit5 Phone Alarm 1 ON 0 OFF
bit4 SMS Alarm 1 ON 0 OFF
bit3 Low External Battery Alarm 1 ON 0 OFF
bit2 Network Alarm 1 ON 0 OFF
bit1 Phone Alarm 1 ON 0 OFF
bit0 SMS Alarm 1 ON 0 OFF

alm3

Alarm Bit 3

bit7 Overspeed Alarm 1 ON 0 OFF
bit6 Network Alarm 1 ON 0 OFF
bit5 Phone Alarm 1 ON 0 OFF
bit4 SMS Alarm 1 ON 0 OFF
bit3 Power Off Alarm 1 ON 0 OFF
bit2 Network Alarm 1 ON 0 OFF
bit1 Phone Alarm 1 ON 0 OFF
bit0 SMS Alarm 1 ON 0 OFF

sta1

Status Bit 1

bit7 Arm Status 1 Arm 0 Disarm
bit6 Automatically Arm 1 ON 0 OFF
bit5 Manually Arm 1 ON 0 OFF
bit4 Remotely Disarm 1 ON 0 OFF
bit3 To Be Defined
bit2 To Be Defined
bit1 Disassembly OFF 1 ON 0 OFF
bit0 Disassembly Alarm Status 1 ON 0 OFF

dyd

Fuel/Electricity Cutoff Status

bit7 Undefined
bit6 Undefined
bit5 Undefined
bit4 Undefined
bit3 Deferred execution caused by overspeed 1:Valid bit 0: Invalid bit
bit2 Deferred execution 1:Valid bit 0: Invalid bit caused by un-located GPS
bit1 Oil/Electricity cutoff 1:Valid bit 0: Invalid bit
bit0 Oil/Electricity connection 1:Valid bit 0: Invalid bit

sos_num# SOS number, where # - number
center_num Centre number
fence GeoFence
mode MODE
door Door status
cit Content of Terminal Information (heartbeat msg)
temp

Temperature value

°C
hum

Humidity

%

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics