Personal GPS tracker Qbit M | Integrated with Wialon

Features Qbit M:

4G/LTE
Blackbox

Supported in Wialon:

Alarm button
Communication via TCP
Communication via UDP

The following data should also be added to Qbit M unit properties section of Wialon GPS tracking software :

Device type:	Qbit M
Unique ID:	imei

Specify the following parameters in configuration software or configuration Qbit M for use in Wialon Hosting :

Server port:

22801

6 units of Qbit M device type are connected to Wialon Data Center. This represents 0.04% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
imei	imei number
cell_id	Cell Tower ID
imsi	imsi number
mileage	Mileage statistics
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
mnc	Mobile Network Code
battery_vol	Battery Voltage
server_flag	It refers to the data to send (by the coding format);
content	the command response content
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
hdop	HDOP
rssi	LBS Main Cell Tower, rssi
sensor_percent	Fuel level in percent
gsm	GSM signal strength degree
gsm_signal_csq	GSM Signal CSQ
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
acc	ACC Status. ACC low: 0, ACC high: 1
gps_time_status	GPS is Real Time or Reupload
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
door	Door status
temp	Fuel temperature
sats	Number of satellites
sequence_num	Sequence Number
status_reg_content	Report status: Trigger content
battery	Fuel level battery value
pwr_int	Battery voltage(mV)
status_trig_time1	Report status: Trigger time
time	Time stamp
mcc	Mobile Country Code
boot_reason	Boot Reason
lac	Location Area Code
iccid	iccid number
encoding	0X01: UTF-8 0x02: ASCII;
pwr_ext	Voltage level
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
odometer	Odometer
visible_sats	Visible satellites

Parameter name

Description

Units

imei

imei number

cell_id

Cell Tower ID

imsi

imsi number

mileage

Mileage statistics

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

mnc

Mobile Network Code

battery_vol

Battery Voltage

server_flag

It refers to the data to send (by the coding format);

content

the command response content

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

hdop

HDOP

rssi

LBS Main Cell Tower, rssi

sensor_percent

Fuel level in percent

gsm

GSM signal strength degree

gsm_signal_csq

GSM Signal CSQ

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

acc

ACC Status. ACC low: 0, ACC high: 1

gps_time_status

GPS is Real Time or Reupload

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

door

Door status

temp

Fuel temperature

sats

Number of satellites

sequence_num

Sequence Number

status_reg_content

Report status: Trigger content

battery

Fuel level battery value

pwr_int

Battery voltage(mV)

status_trig_time1

Report status: Trigger time

time

Time stamp

mcc

Mobile Country Code

boot_reason

Boot Reason

lac

Location Area Code

iccid

iccid number

encoding

0X01: UTF-8
0x02: ASCII;

pwr_ext

Voltage level

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

odometer

Odometer

visible_sats

Visible satellites

Wialon: the single platform for diverse needs

Qbit M

More devices from the manufacturer

Grow your business with us

Become a Wialon partner

Find your local Wialon provider