Asset GPS tracker JM-BL11 | Integrated with Wialon

Features JM-BL11:

4G/LTE
Blackbox
BLE enabled
E-seal
Wi-Fi positioning

Supported in Wialon:

Modification of the "speed" parameter

The following data should also be added to JM-BL11 unit properties section of Wialon GPS tracking software :

Device type:	JM-BL11
Unique ID:	imei

Specify the following parameters in configuration software or configuration JM-BL11 for use in Wialon Hosting :

Server port:

22201

2 units of JM-BL11 device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
pwr_ext	Voltage level	V
gsm	GSM Signal Strength
imei	imei number
imsi	imsi number
iccid	iccid number
time	Time stamp
sats	Number of satellites
visible_sats	Visible satellites
sat#_signal_strength	Satellites signal strength, where # - number
mcc	LBS Main Cell Tower, mcc
mnc	LBS Main Cell Tower, mnc
lac	LBS Main Cell Tower, lac
cell_id	LBS Main Cell Tower, cell_id
rssi	LBS Main Cell Tower, rssi
lac#	LBS Auxiliary Cell Tower, lac, where # - number
cell_id#	LBS Auxiliary Cell Tower, cell_idm, where # - number
rssi#	LBS Auxiliary Cell Tower, rssi, where # - number
gsm_signal_csq	GSM Signal CSQ
battery_vol	Battery Voltage
hdop	HDOP
sequence_num	Sequence Number
inputs	Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
boot_reason	Boot Reason
mileage	Mileage statistics
real_time_mode#	Real time current mode, where # - number
static_parameter_mode#	Static mode parameter, where # - number
land_transport_mode#	Land transportation mode, where # - number
sea_transport_mode#_1	Sea transportation mode parameter 1, where # - number
sea_transport_mode#_2	Sea transportation mode parameter 2, where # - number
is_geofence_rectangular#	Circular o rectangular, 0 is circular, 1 is rectangular, where # - id
is_geofence_exit#	Enter or Exit geofence, 1 is enter, 2 is exit, where # - id
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x10 Door Open 0x11 Door Close 0x12 Removal 0x13 Installation 0x14 Enter Geofence 0x15 Exit Geofence 0x16 Environment Abnormal 0x17 Switch to sea transportation mode 0x18 Switch to land transportation mode 0x19 Switch to static mode 0x1A Battery low power 0x1B Overspeed
status_trig_time1	Report status: Trigger time
status_reg_content	Report status: Trigger content
gps_time_status	GPS is Real Time or Reupload
alm1	Alarm Bit 1
alm2	Alarm Bit 2
alm3	Alarm Bit 3
sta1	Status Bit 1
dyd	Fuel/Electricity Cutoff Status
sos_num#	SOS number, where # - number
center_num	Centre number
fence	GeoFence
mode	MODE
door	Door status
cit	Content of Terminal Information (heartbeat msg)

Parameter name

Description

Units

pwr_ext

Voltage level

gsm

GSM Signal Strength

imei

imei number

imsi

imsi number

iccid

iccid number

time

Time stamp

sats

Number of satellites

visible_sats

Visible satellites

sat#_signal_strength

Satellites signal strength, where # - number

mcc

LBS Main Cell Tower, mcc

mnc

LBS Main Cell Tower, mnc

lac

LBS Main Cell Tower, lac

cell_id

LBS Main Cell Tower, cell_id

rssi

LBS Main Cell Tower, rssi

lac#

LBS Auxiliary Cell Tower, lac, where # - number

cell_id#

LBS Auxiliary Cell Tower, cell_idm, where # - number

rssi#

LBS Auxiliary Cell Tower, rssi, where # - number

gsm_signal_csq

GSM Signal CSQ

battery_vol

Battery Voltage

hdop

HDOP

sequence_num

Sequence Number

inputs

Input’s Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

boot_reason

Boot Reason

mileage

Mileage statistics

real_time_mode#

Real time current mode, where # - number

static_parameter_mode#

Static mode parameter, where # - number

land_transport_mode#

Land transportation mode, where # - number

sea_transport_mode#_1

Sea transportation mode parameter 1, where # - number

sea_transport_mode#_2

Sea transportation mode parameter 2, where # - number

is_geofence_rectangular#

Circular o rectangular, 0 is circular, 1 is rectangular, where # - id

is_geofence_exit#

Enter or Exit geofence, 1 is enter, 2 is exit, where # - id

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x10 Door Open
0x11 Door Close
0x12 Removal
0x13 Installation
0x14 Enter Geofence
0x15 Exit Geofence
0x16 Environment Abnormal
0x17 Switch to sea transportation mode
0x18 Switch to land transportation mode
0x19 Switch to static mode
0x1A Battery low power
0x1B Overspeed

status_trig_time1

Report status: Trigger time

status_reg_content

Report status: Trigger content

gps_time_status

GPS is Real Time or Reupload

alm1

Alarm Bit 1

alm2

Alarm Bit 2

alm3

Alarm Bit 3

sta1

Status Bit 1

dyd

Fuel/Electricity Cutoff Status

sos_num#

SOS number, where # - number

center_num

Centre number

fence

GeoFence

mode

MODE

door

Door status

cit

Content of Terminal Information (heartbeat msg)

Fill out a request form to get started with Wialon

Products

Niche products for addressing specific tasks

JM-BL11

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Become a partner

Request Wialon in your region

Fill out a request form to get started with Wialon