JC181

JC181
Manufacturer: Jimi IoT (Concox)
Forum Discussion

Number of units

15
Online
108
Total
Features JC181:
  • 4G/LTE
Supported in Wialon:
  • Event video
  • Remote management via GPRS
  • Live stream
  • Manual video saving
  • Playback
  • Remote management via SMS
  • Communication via TCP

The following data should also be added to JC181 unit properties section of Wialon GPS tracking software :

Device type: JC181
Unique ID: imei (Last 12 digits of IMEI in DEC OR Last 14 digits of IMEI in HEX)

Specify the following parameters in configuration software or configuration JC181 for use in Wialon Hosting :

Server port: 22544

108 units of JC181 device type are connected to Wialon Data Center. This represents 0.35% of all Video monitoring connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
param_id_#

Parameter value

event_#

Event

alarm_flag

Alarm flag (Bits1-32):

Bit1: 1: Emergency alarm, trigger after triggering alarm switch

Bit2: 1: Over speed alarm

Bit3: 1: Driving alarm malfunction

Bit4: 1: Risk warning

Bit5: 1: GNSS module malfunction

Bit6: 1: GNSS antenna was notconnected or cut

Bit7: 1: GNSS antenna short circuited

Bit8: 1: The terminal main power undervoltage

Bit9: 1: The terminal main power is turned off

Bit10: 1: Terminal LCD or displaymalfunction

Bit11: 1: TTS module malfunction

Bit12: 1: Camera malfunction

Bit13: 1: Road transportcertificate IC card module malfunction

Bit14: 1: Over speed warning

Bit15: 1: Fatigue driving warning

Bit16-Bit18: Reserve

Bit19: 1: The accumulated overspeed driving time of the day

Bit20: 1: Timeout parking

Bit21: 1: Enter and exit the area

Bit22: 1: Enter and exit the route

Bit23: 1: The driving time of theroute is not enough/too long

Bit24: 1: Off track alarm

Bit25: 1: Vehicle VSS malfunction

Bit26: 1: Abnormal fuel capacityof vehicle

Bit27: 1: The vehicle is stolen(through vehicle burglar alarm)

Bit28: 1: Illegal ignition of vehicle

Bit29: 1: Illegal displacement ofvehicle

Bit30: 1: Collision warning

Bit31: 1: Rollover warning

Bit32: 1: Illegal open doorsalarm (when the terminal not set up, it’s not judged illegal open doors)

state_flag

Status (Bits 1-32):

Bit1: 0: ACC off; 1: ACC on

Bit2: 0: Not positioning; 1: Positioning

Bit3: 0: North latitude; 1: South latitude

Bit4: 0: East longitude; 1: West longitude

Bit5: 0: Running status; 1: Stop running status

Bit6: 0: Latitude and longitude are not encrypted by secret plug-ins; 1:

Latitude and longitude are encrypted by secret plug-ins

Bit7-Bit8: Reserve

Bit9-Bit10: 00: Empty load; 01: Half load; 02: Reserve; 3: Full load

(It can be used for empty/heavy passenger car and empty/full load

status of the truck, manual input or sensor acquisition)

Bit11: 0: Vehicle oil line is normal; 1: Vehicle oil line disconnect

Bit12: 0: Vehicle circuit is normal; 1: Vehicle circuit disconnect

Bit13: 0: Vehicle door unlocked; 1: Vehicle door locked

Bit14: 0: Door 1 close; 1: Door 1 open (front door)

Bit15: 0: Door 2 close; 1: Door 2 open (middle door)

Bit16: 0: Door 3 close; 1: Door 3 open (back door)

Bit17: 0: Door 4 close; 1: Door 4 open (door of driver’s seat)

Bit18: 0: Door 5 close; 1: Door 5 open (user-defined)

Bit19: 0: No GPS positioning; 1: GPS positioning

Bit20: 0: No Beidou positioning; 1: Beidou positioning

Bit21: 0: No GLONASS positioning; 1: GLONASS positioning

Bit22: 0: No Galileo positioning; 1: Galileo positioning

Bit23-32: Reserve

odometer

Odometer

fuel_volume

Fuel volume

speed_drvng_rec

Speed driving rec

alarm_event_id

Alarm event ID

overspeed_alarm

Overspeed alarm

position_type

Position type

section_id

Section ID

route_alarm

Route alarm

direction

Direction

driving_time_alarm

Driving time alarm

driving_time

Driving time

driving_results

Driving results

video_alarm

Video alarm

video_signal_loss_alarm

Video signal loss alarm

video_signal_block_alarm

Video signal block alarm

memory_fault_alarm

Memory fault alarm

abnormal_driving_alarm

Abnormal driving alarm

veh_signal_status

Veh. signal status

user_msg

User mesage

alm_type

Alarm type if info_id = 0x64:

0x01: Forward collision warning

0x02: Lane departure warning

0x03: Overly close vehicle warning

0x04: Pedestrian collision warning

0x05: Frequent lane change warning

0x06: Exceeding road sign warning

0x07: Obstacle warning

0x08: Driver Assist Function Failure Warning

0x09~0x0F: User customization

0x10: Road sign identification event

0x11: Active capture event

0x12~0xFF: User customization

Alarm type if info_id = 0x65:

0x01: Fatigue driving warning

0x02: Calling on hand-held mobile phone warning.

0x03: Smoking warning

0x04: Long time without looking ahead warning.

0x05: No driver detected warning.

0x06: Both hands leave steering wheel warning

0x07: Driver behavior monitoring function failure warning

0x08~0x0F: User customization

0x10: Automatic capture event

0x11: Driver change event

0x12~0xFF: User customization

Alarm type if info_id = 0x70:

0x01: Sharp acceleration warning

0x02: Sharp deceleration warning

0x03: Sharp turn warning

0x04: Idle speed warning

0x05: Abnormal flameout warning

0x06: Neutral taxi warning

0x07: Engine overrunning warning

0x12~0xFF: User customization

veh_stat

Vehicle status, the same as state_flag

info_id

Additional information ID

  1. 0x64 - driving assist warning information
  2. 0x65 - driver behavior monitoring function warning information
  3. 0x70 - violent driving warning information
  4. 0x14 - Video-related alarm
  5. 0x15 - Video signal loss alarm
  6. 0x16 - Video signal blockage alarm
  7. 0x17 - Memory fault alarm
  8. 0x18 -Driving behavior alarm

alm_time

Alarm time threshold

sec
alm_thre1

Warning threshold 1

When alm_type is 0x01~0x03, this bit is warning gravity acceleration threshold in 1/100g; when alm_type is 0x04~0x07, this bit is warning speed threshold in km/h.

alm_thre2

Warning threshold 2

This bit is reserved when alm_type is 0x01~0x03; when alm_type is 0x04~0x07, this bit is warning engine speed threshold in RPM.

workstate

Workstate,

0x01: normal work

0x02: standby mode

0x03: Upgrade maintenance

0x04: Device is abnormal

0x10: Disconnect

alarm_status

Alarm status, bits(1-32)

Bitwise setting: 0 means no, 1 means yes

bit1: cameraabnormal

bit2: Main memory exception

bit3: Auxiliary memory exception

bit4: Infrared fill light is abnormal

bit5: abnormal speaker

bit6: Abnormal battery

bit7~bit10:reserved

bit11: Communication module error

bit12: The positioning module is abnormal

bit13~bit32:reserved

alm_lvl

Warning level:

  • 0x01: Level 1 warning
  • 0x02: Level 2 warning

alm_id

According to the warning sequence, starting from 0 and accumulates circularly, without distinguishing warning types.

sign_stat

Sign status.

  • 0x00: Not available
  • 0x01: Start sign
  • 0x02: End sign

This field is only applicable to warnings or events with start and end sign types.

veh_ah_spd

Leading vehicle speed. Range: 0~250, valid only when warning types are 0x01 and 0x02, and fill in 0x00 when not available.

km/h
veh_ah_dst

Leading car/pedestrian distance

dev_type

Deviation type:

  1. 0x01: Left deviation
  2. 0x02: Right deviation
  3. Only valid when warning type is 0x02, fill in 0x00 when unavailable.

road_sign_t

Road sign type

  • 0x01: Speed limit sign
  • 0x02: Height limit sign
  • 0x03: Weight limit sign
  • Only valid when warning types are 0x06 and 0x10; fill in 0x00 when not available.

road_sign_d

Road sign data. Data identified on road signs, fill in 0x00 when unavailable.

fat_deg Fatigue degree. Range 1~10. The larger the value, the more severe the fatigue. Only valid when warning type is 0x01, fill in 0x00 when unavailable.
timezone_str

Terminal time zone information

Example: UTC+08:00 / UTC-08:00 can also be sent to Asia/Shanghai (note: this time zone information can recognize daylight saving time)

lte_mcc_[number]

Mobile country code of [number] LTE base station

lte_mnc_[number]

Mobile network code of [number] LTE base station

lte_tac_[number]

Tracking area code of [number] LTE base station

lte_eci_[number

Encoded ID + Cell ID of the [number] LTE Base station

lte_psr_[number

The RSRP value of [number] LTE base station

alarm_evt_id

Alarm or Event ID

Alarm\Event category

Alarm\Event ID range

Alarm description

Video category

0x0001~0x03FF

Camera related, algorithm related

Positioning class

0x0400 ~0x0BFF

GPS positioning, car related, driving behavior related

Basic class

0x0C00 ~0xFFFF

SOS, peripherals, battery, system itself related



Video alarms \ events (related to cameras and algorithms)

Alarm\Event ID

Alarm\Event description


0x0001

Camera failure alarm


0x0002

….



Positioning alarms \ events (GPS, car, driving behavior related)

Alarm\Event ID

Alarm\Event description

0x0400

Rapid acceleration

0x0401

Rapid deceleration

0x0402

sharp turn

0x0403

Speed warning

0x0404

Timeout fatigue alarm

0x0405

Driving collision warning

0x0406

Parking vibration alarm

0x0407

Displacement alarm

0x0408

Fence entry warning

0x0409

Out of the fence alarm

0x040A

Left turn warning

0x040B

Right turn warning

0x040C

Open door alarm

0x040D

Close warning

0x0410

sleep mode event

0x0411

work mode events

0x03FF

Basic alarm


Alarm\Event ID

Alarm\Event description

0x0C01

SOS emergency alarm

0x0C02

External low power alarm

0x0C03

ACC ON alarm

0x0C04

ACC OFF alarm

0x0C05

Anti-theft alarm

0x0C06

Calibration abnormality alarm

0x0C07

Identity recognition alarm

0x0C08

Alarm triggered by door

0x0C09

Abnormal oil feeling alarm

0x0C0A

Abnormal temperature and humidity alarm

0x0C0B

DLT card swiping login alarm

0x0C0C

DLT card swiping logout alarm

0x0C0D

DLT non-registered card swipe alarm

0x0C0E

Power outage alarm

0xFFF

alm_evt_tm

Time & Date of when Alarm & Event occured

alm_evt_serial_num

Serial number of alarm or event. The alarm serial number at the same time point must be guaranteed not to be repeated at the same time point

alm_evt_add_id

Additional Id of alarm


Alarm additional information ID

Alarm additional ID description

0001

Fence ID

0002

fence name

0003

DLT card data

0004

Adas calibration data

data_rep_mode
  • 0x00 Timing reporting
  • 0x01 Fixed distance reporting
  • 0x02 Inflection point upload
  • 0x03 ACC status change upload
  • 0x04 After changing from motion to static state, the last positioning point is retransmitted
  • 0x05 After the network is disconnected and reconnected, the last valid upload point before reporting
  • 0x06 Reporting mode: star Calendar update forced upload of GPS points
  • 0x07 Reporting mode: Press button to upload positioning point
  • 0x08 Reporting mode: Power on and report location information
  • 0x09 Reporting mode: GPSON
  • 0x0A Reporting mode: The device reports the last longitude and latitude after being stationary, but the time is updated
  • 0x0B WIFI parses the longitude and latitude upload packet
  • 0x0C Reporting mode : LJDW (immediate positioning) command reports
  • 0x0D Reporting mode: reports the last longitude and latitude
  • 0x0E after the device is stationary Reporting mode: GPSDUP upload (timed upload in stationary state)
  • 0x0F Reporting mode: exits tracking mode
realtm_transmission
  • 0x00 - real time upload
  • 0x01 - historic upload
pwr_ext_supply
  • 0x00 Not connected to the power supply for charging
  • 0x01 Connected to the power supply for charging
pwr_int_lvl
  • 0x00 Not connected to the power supply for charging
  • 0x01: The battery is extremely low (not enough to make calls and send text messages, etc.)
  • 0x02: The light is very low (low battery alarm)
  • 0x03: The battery is low (can be used normally)
  • 0x04: The battery is medium
  • 0x05: The battery is high
  • 0x06: The battery is extremely high
gsm_lvl
  • 0x00: No signal;
  • 0x01: Very weak signal
  • 0x02: Weak signal
  • 0x03: Good signal
  • 0x04: Strong signal

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone