Personal GPS tracker GT03D | Integrated with Wialon

Supported in Wialon:

Remote management via GPRS
Remote management via SMS
Modification of the "speed" parameter
Communication via TCP

The following data should also be added to GT03D unit properties section of Wialon GPS tracking software :

Device type:	GT03D
Unique ID:	imei

Specify the following parameters in configuration software or configuration GT03D for use in Wialon Hosting :

Server port:

21476

15 units of GT03D device type are connected to Wialon Data Center. This represents 0.09% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
gsm	GSM signal strength degree
acc	ACC Status. ACC low: 0, ACC high: 1
imsi	imsi number
cell_id	Cell Tower ID
gps_time_status	GPS is Real Time or Reupload
sequence_num	Sequence Number
visible_sats	Visible satellites
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
rssi	LBS Main Cell Tower, rssi
pwr_int	Battery voltage(mV)
server_flag	It refers to the data to send (by the coding format);
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
status_reg_content	Report status: Trigger content
lac	Location Area Code
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
status_trig_time1	Report status: Trigger time
battery_vol	Battery Voltage
imei	imei number
content	the command response content
door	Door status
gsm_signal_csq	GSM Signal CSQ
hdop	HDOP
time	Time stamp
inputs	Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status
mcc	Mobile Country Code
mnc	Mobile Network Code
status_code	Report status: Status code 0x00 Upload in fixed time interval 0x14 Enter Geofence 0x15 Exit Geofence 0x1A Battery low power 0x1B Overspeed
sensor_percent	Fuel level in percent
battery	Fuel level battery value
sats	Number of satellites
temp	Fuel temperature
boot_reason	Boot Reason
pwr_ext	Voltage level
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
mileage	Mileage statistics
encoding	0X01: UTF-8 0x02: ASCII;
iccid	iccid number
odometer	Odometer

Parameter name

Description

Units

gsm

GSM signal strength degree

acc

ACC Status. ACC low: 0, ACC high: 1

imsi

imsi number

cell_id

Cell Tower ID

gps_time_status

GPS is Real Time or Reupload

sequence_num

Sequence Number

visible_sats

Visible satellites

sensor_type

Sensor type:
0: BLE type;
1: RS485 type.

rssi

LBS Main Cell Tower, rssi

pwr_int

Battery voltage(mV)

server_flag

It refers to the data to send (by the coding format);

alarm_status

Alarm status:
0: Normal
1: Shock Alarm
2: Power Cut Alarm
3: Low Battery Alarm
4: SOS

status_reg_content

Report status: Trigger content

lac

Location Area Code

alarm

Alarm status:
0: normal
1: SOS
2: Power Cut Alarm
3: Vibration Alarm
4: Fence In Alarm
5: Fence Out Alarm
6: Over-speed Alarm
9: Moving Alarm

status_trig_time1

Report status: Trigger time

battery_vol

Battery Voltage

imei

imei number

content

the command response content

door

Door status

gsm_signal_csq

GSM Signal CSQ

hdop

HDOP

time

Time stamp

inputs

Input's Status, Bit 1-4: Door button status (1/0 Door Open/Close), Bit 5-8: Tamper button status (1/0 Removal/Installation) 0xff: Failed to get button status

mcc

Mobile Country Code

mnc

Mobile Network Code

status_code

Report status: Status code
0x00 Upload in fixed time interval
0x14 Enter Geofence
0x15 Exit Geofence
0x1A Battery low power
0x1B Overspeed

sensor_percent

Fuel level in percent

battery

Fuel level battery value

sats

Number of satellites

temp

Fuel temperature

boot_reason

Boot Reason

pwr_ext

Voltage level

voltage

Voltage degree 0-6:
0: Lowest power and power off
1: No enough power to dial a call or send messages.
2: Low power and alarm
3: Lower power but can work normally
3~6: Work in good condition

mileage

Mileage statistics

encoding

0X01: UTF-8
0x02: ASCII;

iccid

iccid number

odometer

Odometer

Wialon: the single platform for diverse needs

GT03D

More devices from the manufacturer

Grow your business with us

Become a Wialon partner

Find your local Wialon provider