PL200

Manufacturer: Jimi IoT (Concox)

Forum Discussion

Number of units

Online

Total

Features PL200:

Supported in Wialon:

The following data should also be added to PL200 unit properties section of Wialon GPS tracking software :

Device type:	PL200
Unique ID:	imei

Specify the following parameters in configuration software or configuration PL200 for use in Wialon Hosting :

Server port:

22647

12 units of PL200 device type are connected to Wialon Data Center. This represents 0.06% of all Personal trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
alarm	Alarm status: 0: normal 1: SOS 2: Power Cut Alarm 3: Vibration Alarm 4: Fence In Alarm 5: Fence Out Alarm 6: Over-speed Alarm 9: Moving Alarm
alarm_status	Alarm status: 0: Normal 1: Shock Alarm 2: Power Cut Alarm 3: Low Battery Alarm 4: SOS
mcc	Mobile Country Code
mnc	Mobile Network Code
lac	Location Area Code
cell_id	Cell Tower ID
voltage	Voltage degree 0-6: 0: Lowest power and power off 1: No enough power to dial a call or send messages. 2: Low power and alarm 3: Lower power but can work normally 3~6: Work in good condition
gsm	GSM signal strength degree
sensor_percent	Fuel level in percent	%
temp	Fuel temperature	°C
battery	Fuel level battery value	V
sensor_type	Sensor type: 0: BLE type; 1: RS485 type.
server_flag	It refers to the data to send (by the coding format);
encoding	0X01: UTF-8 0x02: ASCII;
content	the command response content