EG01G

EG01G
Forum Discussion

Número de unidades

1
ON-LINE
2
TOTAL
Features EG01G:
  • 4G/LTE
  • Boîte à mémoire
  • Compatibilité avec GLONASS
  • Installation magnétique

The following data should also be added to EG01G unit properties section of Wialon GPS tracking software :

Device type: EG01G
ID único: custom

Specify the following parameters in configuration software or configuration EG01G for use in Wialon Hosting :

Porta do servidor: 22687

2 units of EG01G device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
motion_status_N

indicates the movement status
0 is not moving 1 is moving

pressure The force exerted by the substance inside a container, measured in units psi
temp3 Represents temperature values. The unit is Celsius and the range is from -127 to +127.
btah_channels

Bluetooth temperature and humidity sensor. Channels numbers.

speed_drvng_rec The recorded speed of a vehicle while it was being driven.
city_id An identification number corresponding to a specific city.
gsm Refers to the Global System for Mobile Communications, a standard developed to describe protocols for second-generation digital cellular networks.
mielta_device_name The name of a device
btah_mot_ev_count_{n}

Bluetooth temperature and humidity sensor. Means detected motion count.

iccid

10-byte SIM card ICCID number.

btah_humidity_# Represents humidity values in percentage, ranging from 0 to 100%.
btah_manufactur_id_# Represents the manufacturer ID.
oil_perc

Oil volume percentage

humidity2 Represents the humidity level, which indicates the amount of moisture in the air.
tco_driver_name

Driver's name

bor_accel_y

Bluetooth oil rod protocol. Acceleration (X, Y, Z)

accel_y The Y-axis component of acceleration, indicating the vehicle's movement in the vertical direction.
mac_N

MAC ID, where N is number of channel Bluetooth temperature and humidity sensor

veh_id Represents the vehicle identification number, a unique code to identify individual motor vehicles.
cmd_sent Indicates a command that has been sent to a device or system.
bor_manufactur_data

Bluetooth oil rod protocol. Manufacturer ID

btah_mac_# The MAC address of a Bluetooth device, used for identifying and connecting to the device.
battery_lvl The level of charge remaining in the vehicle's battery, expressed as a percentage.
tilt_y The Y-axis component of tilt, indicating the vehicle's inclination in the vertical direction.
temp1 Temperature measurement in degrees Celsius.
bora_manufactur_id_{n}

Bluetooth oil rod array protocol (0x0121). Manufacturer ID

mielta_accel_y Acceleration value in the Y direction.
tkstar_light_alarm A notification indicating the activation of a light-related alert or warning.
alarm_status Indicates whether an alarm is active or inactive.
abnormal_driving_alarm Indicates whether there is an alarm for abnormal driving behavior.
temp5 Temperature measurement in degrees Celsius.
tco_insert_card

card status
1: Professional qualification certificate IC card is inserted (driver goes to work);
2: The IC card of the professional qualification certificate is removed (the driver is off duty).

battery Indicates the state of the battery switch, where 1 represents the battery switch-off and 0 represents the battery switch-on.
humidity3 Humidity level expressed as a percentage.
device_roll_N

indicate the device roll.The device roll can be determined from -180 to 180 degrees.

memory_fault_alarm Indicates whether there is an alarm for a memory fault.
fuel_tank_lvl_N

Fuel tank height, N is a Bluetooth oil rod number in a queue

fuel_meter_data_type

Oil table data type
0-percent 1-Oil gauge value

ie_auth_status

ibutton extension protocol. Authorization status Byte1: 0x00 Unauthorized 0x01 Authorized

mielta_accel_x Acceleration value in the X direction.
tco_ic_card_read

0: IC card reading success;
1: Card reading failed because the card key authentication failed;
2: Card reading failed because the card is locked;
3: Card reading failed because the card was pulled out;
4: Card reading failed due to data verification error.
The following fields are valid only when the IC card reading result is equal to 0.

mielta_fuel_meter_stability Indicates whether the fuel meter is stable, allowing for calibration.
fuel_meter_stability

Instrument frequency stability status
0 unstable 1 stable,

btah_humidity_{n}

Bluetooth temperature and humidity sensor. Humidity

manufacturer Identification of the manufacturer.
voltage The amount of electrical power, often measured in volts.
position_type Indicates the type of positioning used
manufacturer_data

Manufacturer ID

humidity1 Humidity is the amount of water vapor present in the air, measured as a percentage.
oil

Oil gauge value

accel_z Represents the acceleration measurement along the Z-axis, part of a three-dimensional acceleration data set.
bor_vbat

Bluetooth oil rod protocol. Battery voltage

he_hum_{n}

Humidity extension protocol humidity

start_time The time at which an event or process begins.
oil_level_N

Oil volume percentage, N is a Bluetooth oil rod number in a queue

vbat_N

Battery voltage, N is a Bluetooth oil rod number in a queue

bor_fuel_level_stab

Bluetooth oil rod protocol. Fuel tank height status Bit1: 0 unstable 1 stable

hibernation_mode A mode where the device consumes minimal power, typically used when it is not active.
manufacturer_id_N

Manufacturer ID, N is a Bluetooth oil rod number in a queue

te_temp_{n}

Temperature Extension Protocol Temperature

chrg_volt The voltage level used for charging the device's battery.
bor_cover_sensor

Bluetooth oil rod protocol. Sensor status: 0 Not activated 1 Activated

bora_mac_{n}

Bluetooth oil rod array protocol (0x0121). MAC ID

tco_qual_cert_code

Professional qualification certificate code

bora_state_{n}

Bluetooth oil rod array protocol (0x0121). Working status Bit0: 1 Normal 0 Abnormal

odometer A device that measures the distance traveled by a vehicle.
tilt_z The tilt or angle measurement on the Z-axis, often used in devices to detect orientation or movement.
bor_temp

Bluetooth oil rod protocol. Temperature

tco_notif_body_name

Issuing agency name

alm_arm_state Indicates whether the alarm system is armed or disarmed.
pwr_saving_mode Indicates the power saving mode status
eas_ext_alarm_status

Extended alarm status bit

afgm_oil_perc

AIBOX fuel gauge, mileage upload. Oil volume percentage

tilt_x Represents the tilt or inclination in the X direction.
mielta_accel_z Represents the acceleration in the Z direction.
cover_sensor

Sensor status
0 Not activated 1 Activated

bor_accel_x

Bluetooth oil rod protocol. Acceleration (X, Y, Z)

afgm_mileage

AIBOX fuel gauge, mileage upload. Mileage

alm_id Represents an alarm identification number.
accel_(x/y/z)

Acceleration (X, Y, Z)

tco_insert_time

Card insertion/removal time. The following fields are valid and filled only when the tco_insert_card is 1.

direction Refers to the compass direction
ie_ibutton

ibutton extension protocol. ibutton data

alm_time Refers to the time when an alarm was triggered.
end_time Indicates the time when a specific event or process ends.
air_quality2 Refers to a second measurement or assessment of air quality.
bor_oil_volume_level

Bluetooth oil rod protocol. Oil volume percentage 0..100 %

device_temp The temperature of the device.
channels

number of channels

bora_fuel_tank_lvl_{n}

Bluetooth oil rod array protocol (0x0121). Fuel tank level height

alm_type This parameter refers to the type of alarm, possibly indicating different alert categories or levels.
device_pitch_N

indicates the device spacing range from -90 to 90 degrees

btah_manufactur_id_{n}

Bluetooth temperature and humidity sensor. Manufacturer ID

lrore_oil_data_{n}

Long Run Oil Rod Extension Protocol Oil data

hdop Horizontal dilution of precision, indicating the accuracy of GPS horizontal position.
ead_ext_alarm_status

Extended alarm data bit 2

mielta_fuel_tank_heigh The height of the fuel tank, which can be calibrated when stable.
btah_vbat_{n}

Bluetooth temperature and humidity sensor. Battery voltage

vbat

Battery voltage

tkstar_pos_status The status of the positioning, potentially indicating whether the device has a valid GPS fix.
bora_vbat_{n}

Bluetooth oil rod array protocol (0x0121). Battery voltage

le_ad_{n}

Load Extension Protocol

mark_N

Mark
BIT 0 – Temperature value present. 1 means the device is reading and transmitting the temperature value.
BIT1 – Humidity value present. 1 means the device is reading and transmitting humidity values.
BIT2 – Magnetic sensor present. 1 means the device is reading and transmitting magnetic sensor
BIT3 – Magnetic sensor status (1 magnetic field detected/0 magnetic field not detected)
BIT4 – Motion sensor counter. 1 means the device is reading and transmitting motion
BIT5 – Motion sensor angle. 1 means the device is reading and transmitting angle,
BIT6 – Low battery indicator. 0 – Indicates that the device battery level is from 100% to 15
BIT7 – Battery voltage value present. 1 means the device is reading and transmitting the battery voltage

fuel_level_stability

Fuel tank height status
0 unstable 1 stable

user_msg A message or notification intended for the user.
motion_event_count_N

The value indicates that the device has detected a total of motion events.

temp2 A secondary temperature reading or measurement.
oil_volume_level

Oil volume percentage

alm_thre1 Threshold for triggering an alarm or alert.
device_humidity This refers to the humidity level detected by the device, which is expressed as a percentage.
bor_fuel_meter_stab

Bluetooth oil rod protocol. Instrument frequency stability status Bit0: 0 unstable 1 stable

jore_cur_liq_lvl_{n}

Jiutong Oil Rod Extension Protocol. Current liquid level in ten thousandths, the maximum value is 10000.

state_N

Working status
Bit0: 1 Normal 0 Abnormal
N is a Bluetooth oil rod number in a queue

fuel_tank_height

Fuel tank height

jore_cur_adj_oil_{n}

Jiutong Oil Rod Extension Protocol. Current adjusted oil level value, 0-4095.

accel_x This represents the acceleration measurement along the X-axis, showing how quickly the vehicle or device is speeding up or slowing down in that direction.
mileage

Mileage,

bora_channels

Bluetooth oil rod array protocol (0x0121). Channels numbers

alm_lvl The level or severity of an alarm.
humidity4 Indicates the level of humidity, expressed as a percentage between 0 and 100.
content_{n}

Content data

ev_pwr_ext

External voltage

afgm_fuel_meter_type

AIBOX fuel gauge, mileage upload. Oil table data type

tracking_mode Refers to the method used to monitor the location of a vehicle
btah_device_pitch_{n}

Bluetooth temperature and humidity sensor. Angle

driving_time The amount of time a vehicle has been in motion
bora_temp_{n}

Bluetooth oil rod array protocol (0x0121). Temperature

alarm_event_id An identifier for a specific alarm event, used to track and manage alerts
bor_accel_z

Bluetooth oil rod protocol. Acceleration (X, Y, Z)

bora_oil_level_{n}

Bluetooth oil rod array protocol (0x0121). Oil volume percentage

btah_temp_{n}

Bluetooth temperature and humidity sensor. Temperature

btah_motion_status_{n}

Bluetooth temperature and humidity sensor. Movement status. If the device is not moving 0. If it is 1 the device is moving.

btah_mac_{n}

Bluetooth temperature and humidity sensor. MAC ID

temperature

temperature

iv_pwr_int

Internal voltage

tkstar_displacement_alarm This parameter refers to an alert triggered when a significant movement
device_name

Device name

tco_cert_term

Certificate validity period

content_id_{n}

Content id

device_model This parameter refers to the specific model identifier of a device.
temp_N

temperature, N is a Bluetooth oil rod number in a queue

device_status This parameter indicates the current operational state
afgm_oil

AIBOX fuel gauge, mileage upload. Oil gauge value.

dev_type This parameter refers to the category
jore_cur_oil_lvl_{n}

Jiutong Oil Rod Extension Protocol. Divide by 100 to get the current oil level in liters, such as 384.09L.

tkstar_vibration_alarm Indicates whether the vibration alarm is switched on or off.
workstate Indicates the working status, where a specific bit pattern signifies normal or abnormal operation.
imei A unique identifier for a mobile device, used for tracking and identification.
btah_mark_{n}

Bluetooth temperature and humidity sensor. Info byte.

bor_device_name

Bluetooth oil rod protocol. Device name

ie_check_status

ibutton extension protocol. Check-in and check-out status Byte0: 0x00 Check-out, 0x01 Check-in, 0xff Unknown error

bor_fuel_tank_height

Bluetooth oil rod protocol. Fuel tank height

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone