GPS tracker Teltonika AT1000 | Integrated with Wialon

Features Teltonika AT1000:

Caixa preta
Odômetro integrado

Supported in Wialon:

Sensores ADC
Suporte para barramento CAN
Identificação do motorista
Sensores digitais
Envio de dados por SMS
Gerenciamento remoto via SMS
Comunicação via TCP
Comunicação via UDP

The following data should also be added to Teltonika AT1000 unit properties section of Wialon GPS tracking software :

Device type:	Teltonika AT1000
ID único:	imei
Password to access the object:	Configuration password to access the object

Specify the following parameters in configuration software or configuration Teltonika AT1000 for use in Wialon Hosting :

Porta do servidor:

20225

19 units of Teltonika AT1000 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
battery_charge	Battery charge
canN	CAN specific data (I/O property 145-154)
counter1	Fuel Counter (I/O property 76)
driver_code	Shows the moment of binding/unbinding a driver: 1 - binding 0 - unbinding
driver_status	Garmin driver status
gsm	GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop	Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status	Last Garmin driver status
paramN	Value of special I/O property, where N - ID of property
pdop	Position Dilution of Precision (I/O property 22)
priority	Message Priority: 0 - low 1 - high 2 - panic 3 - security
pwr_ext	Power supply voltage (I/O property 66)	V
pwr_int	Battery voltage (I/O property 67)	V
vdop	Vertical Dilution of Precision (I/O property 21)

You can also download an example of Teltonika AT1000 configuration file to connect it to Wialon GPS tracking software.

You can also download an example of object configuration file for Teltonika AT1000 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with sensors.

For communication via SMS, enter "login password" defined for the device and divided by the space in the "Device access password" field of the GPS unit in Wialon GPS tracking software.

To support «24 SMS in 1» mode, the interval between the points should be 900 seconds as it is on the server, i.e. the value should be 900000 ms in the device configuration.

I/O elements are additional source of information and are registered together with GPS data.

Preencha um formulário de solicitação para começar