GPS tracker Teltonika FM5300 | Integrated with Wialon

Features Teltonika FM5300:

Compatibilité avec GLONASS
Sending data to multiple servers

Supported in Wialon:

Accéléromètre
Capteurs analogiques (ADC)
Données remontées du CANbus
Gestion à distance via GPRS
Capteurs numériques
Envoi des données par SMS
Gestion à distance via SMS
Téléchargement des fichiers à partir du tachygraphe
Communication via TCP
Communication via UDP

The following data should also be added to Teltonika FM5300 unit properties section of Wialon GPS tracking software :

Device type:	Teltonika FM5300
ID único:	imei
Password to access the object:	Configuration password to access the object

Specify the following parameters in configuration software or configuration Teltonika FM5300 for use in Wialon Hosting :

Porta do servidor:

20445

1376 units of Teltonika FM5300 device type are connected to Wialon Data Center. This represents 0.06% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
battery_charge	Battery charge
canN	CAN specific data (I/O property 145-154)
counter1	Fuel Counter (I/O property 76)
driver_code	Shows the moment of binding/unbinding a driver: 1 - binding 0 - unbinding
driver_status	Garmin driver status
gsm	GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop	Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status	Last Garmin driver status
paramN	Value of special I/O property, where N - ID of property
pdop	Position Dilution of Precision (I/O property 22)
priority	Message Priority: 0 - low 1 - high 2 - panic 3 - security
pwr_ext	Power supply voltage (I/O property 66)	V
pwr_int	Battery voltage (I/O property 67)	V
vdop	Vertical Dilution of Precision (I/O property 21)

You can also download an example of object configuration file for Teltonika FM5300 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

Instruction on configuring Teltonika FM5300 via TCP.

I/O elements are additional source of information and are registered together with GPS data.

Preencha um formulário de solicitação para começar