Teltonika FM5300

Teltonika FM5300
Manufacturer: Teltonika
Forum Discussion

Number of units

409
Online
1377
Total
Features Teltonika FM5300:
  • GLONASS support
  • Sending data to multiple servers
Supported in Wialon:
  • Accelerometer
  • ADC sensors
  • CAN-bus support
  • Remote management via GPRS
  • Digital sensors
  • SMS sending of data
  • Remote management via SMS
  • Tachograph file download
  • Communication via TCP
  • Communication via UDP

The following data should also be added to Teltonika FM5300 unit properties section of Wialon GPS tracking software :

Device type: Teltonika FM5300
Unique ID: imei
Password to access the object: Configuration password to access the object

Specify the following parameters in configuration software or configuration Teltonika FM5300 for use in Wialon Hosting :

Server port: 20445

1377 units of Teltonika FM5300 device type are connected to Wialon Data Center. This represents 0.06% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery_charge Battery charge
canN CAN specific data (I/O property 145-154)
counter1 Fuel Counter (I/O property 76)
driver_code

Shows the moment of binding/unbinding a driver:
1 - binding
0 - unbinding

driver_status Garmin driver status
gsm GSM signal strength level 0 (lowest) – 5 (highest) (I/O property 21)
hdop Horizontal Dilution of Precision (I/O property 20 or 182)
last_driver_status Last Garmin driver status
paramN Value of special I/O property, where N - ID of property
pdop Position Dilution of Precision (I/O property 22)
priority

Message Priority:
0 - low
1 - high
2 - panic
3 - security

pwr_ext Power supply voltage (I/O property 66) V
pwr_int Battery voltage (I/O property 67) V
vdop Vertical Dilution of Precision (I/O property 21)

You can also download an example of object configuration file for Teltonika FM5300 to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

Instruction on configuring Teltonika FM5300 via TCP.

I/O elements are additional source of information and are registered together with GPS data.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone