Jointech JT800

Jointech JT800
Fabricante: Jointech

Número de unidades

0
ON-LINE
3
TOTAL
Features Jointech JT800:
  • 3G
  • 4G/LTE
  • Caixa preta
  • BLE enabled
  • SIM duplo
Supported in Wialon:
  • Acelerômetro
  • Gerenciamento remoto via GPRS
  • Transmissão ao vivo
  • Gerenciamento remoto via SMS
  • Comunicação via TCP

The following data should also be added to Jointech JT800 unit properties section of Wialon GPS tracking software :

Device type: Jointech JT800
ID único: serial

Specify the following parameters in configuration software or configuration Jointech JT800 for use in Wialon Hosting :

Porta do servidor: 22969

3 units of Jointech JT800 device type are connected to Wialon Data Center. This represents 0% of all Video monitoring connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
bat_vibration Battery vibration value.
fuel_volume Fuel volume reported by the device.
unlocked_times Number of unlock operations.
bat_cycles Battery cycle count.
bat_current Battery current.
mcc Mobile Country Code.
cell_id Cell identifier.
pwr_int Internal power voltage.
lock_status Lock status.
dinamic_pass Dynamic unlock password. Parameter spelling is preserved from the script.
sent_gps Number of sent GPS messages.
mnc Mobile Network Code.
network_standart Network standard. Parameter spelling is preserved from the script.
bat_status Battery status.
static_pass Static unlock password.
mileage Mileage reported by the device.
prot_ver Protocol version.
bat_soh Battery state of health.
pwr_level Power level.
bat_temp Battery temperature.
wireless_str Wireless signal strength.
bat_lvl Battery level.
bat_soc Battery state of charge.
bat_alarm Battery alarm code.
bat_capacity Battery capacity.
lac Location Area Code.
dinamic_pass_app Dynamic unlock password received from the app. Parameter spelling is preserved from the script.
bat_volt Battery voltage.
gnss GNSS status.
gps_mileage Mileage calculated from GPS data.
rope_catting Rope cutting event flag. Parameter spelling is preserved from the script.
static_pass_app Static unlock password received from the app.
sealed_state Sealed state event flag.
bluetooth_unlock Bluetooth unlock event flag.
static_pass_sms Static unlock password received by SMS.
wrong_app_pass Incorrect app password.
wrong_dynamic_pass_app Incorrect dynamic password received from the app.
lock_rope Lock rope event flag.
sealing Sealing event flag.
lock_solenoid Lock solenoid event flag.
long_unlock Long unlock event flag.
wrong_static_pass Incorrect static password.
lock_event Lock event flag.
wrong_dynamic_pass Incorrect dynamic password.
wrong_sms_pass Incorrect SMS password.
unlocking Unlocking event flag.
swipe_vehicle_card Vehicle card identifier read during a card swipe.
illegal_card Unauthorized card identifier.
unseal Unsealing event flag.
wrong_dynamic_pass_sms Incorrect dynamic password received by SMS.
dinamic_pass_sms Dynamic unlock password received by SMS. Parameter spelling is preserved from the script.
remote_unseal Remote unsealing event flag.
bluetooth_unseal Bluetooth unsealing event flag.
time_shot Timed image capture event flag.
swipe_auth_card Authorization card identifier read during a card swipe.
bluetooth_seal Bluetooth sealing event flag.
enter_fence Geofence entry event flag.
capture Image capture event flag.
remote_seal Remote sealing event flag.
rfid_abnormal RFID card identifier reported for an abnormal event.
accel_z Signed Z-axis acceleration. mg
gate_event Gate event code.
lock_mac Lock MAC address.
illuminance Illuminance value.
media_event Media event type parsed from the file name.
cmd_response Command response received from the device.
accel_x Signed X-axis acceleration. mg
ext_data_id External data identifier.
text Command response registered as a driver message.
accel_y Signed Y-axis acceleration. mg
fault_type Fault type.
lock_rssi Lock signal strength.
fence_id Geofence identifier.
gate_num Gate number.
fault_code Fault code.
auth_str Authentication string sent by the device.
backup_battery_st Backup battery state.
waybill_event Waybill event flag.
event_id Event identifier.
media_file Media file name reported after upload.
backup_volt Backup battery voltage.
alarm_sign Alarm flag bitmask from the location report.
media_time Media timestamp parsed from the file name.
wifi_num Number of Wi-Fi access points parsed from the report.
backup_battery Backup battery status.
state_definition Status bitmask from the location report.

More devices from the manufacturer

Faça sua empresa crescer com a gente