Queclink GL501 LTE

Current volume of the battery

Current mode of the device:

0: Power saving mode

1: Continuous nide

the movement status of the device

0: Stillness

1: Motion

The real time temperature value of the terminal

The light sensor tamper state

0: Normal state

1: Tamper alarm state

The ICCID of the installed SIM card

The network signal strength leveel

The quality of the network signal

Bitwise mask to configue which data item is reported

bit 0: Bluetooth accessory name

bit 1: Bluetooth accessory MAC

bit 2: Bluetooth accessory connection status: 1 - connected | 0 - disconnected

bit 3: Bluetooth accessory battery voltage

bit 4: Bluetooth accessory temperature

bit 5: Bluetooth accessory humidity

The number of bluetooth accessory. If it is 0, the accessory
details fields from bt_index to bt[bt_index]_hum will not display. I

The index of bluetooth accessory. Takes values 0-9

The type of the bluetooth accessory. Possible types:

0: No Bluetooth accessory.
6: Beacon temperature/humidity sensor.

The data is read from Bluetooth accessory

The humidity data of Bluetooth accessory

The Temperature data of the Bluetooth accessory

The battery level of Bluetooth accessory

The alarm type of the bluetooth accessory:

0: The voltage of the Bluetooth accessory is low

1: The temperature alarm: Current temperature value is below low temperature limit

2: The temperature alarm: Current temperature value is upper high temperature limit

3: The temperature alarm: Current temperature value is within the range defined by temperature limit

7: Humidity alarm: Current Humidity value is below low humidity limit

8: Humidity alarm: Current Humidity valueis upper high humidity limit

9: Humidity alarm: Current Humidity values is within the range defined by humidity limit

A: The available alarm: The connection status of Bluetooth accessory has changed