Queclink GL501 LTE

Queclink GL501 LTE
Forum Discussion

Number of units

4
Online
70
Total

The following data should also be added to Queclink GL501 LTE unit properties section of Wialon GPS tracking software :

Device type: Queclink GL501 LTE
Unique ID: imei

Specify the following parameters in configuration software or configuration Queclink GL501 LTE for use in Wialon Hosting :

Server port: 21948

70 units of Queclink GL501 LTE device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery

Current volume of the battery

%
active_mode

Current mode of the device:

0: Power saving mode

1: Continuous nide

movement_status

the movement status of the device

0: Stillness

1: Motion

temp_int

The real time temperature value of the terminal

°С
evt_state1

The light sensor tamper state

0: Normal state

1: Tamper alarm state

iccid

The ICCID of the installed SIM card

csq_rssi

The network signal strength leveel

csq_ber

The quality of the network signal

bt[bt_index]_mask

Bitwise mask to configue which data item is reported

bit 0: Bluetooth accessory name

bit 1: Bluetooth accessory MAC

bit 2: Bluetooth accessory connection status: 1 - connected | 0 - disconnected

bit 3: Bluetooth accessory battery voltage

bit 4: Bluetooth accessory temperature

bit 5: Bluetooth accessory humidity

bt_num

The number of bluetooth accessory. If it is 0, the accessory
details
fields from bt_index to bt[bt_index]_hum will not display. I

bt_index

The index of bluetooth accessory. Takes values 0-9

bt[bt_index]_type

The type of the bluetooth accessory. Possible types:

0: No Bluetooth accessory.
6: Beacon temperature/humidity sensor.


bt[bt_index]_raw_data

The data is read from Bluetooth accessory

bt[bt_index]_hum

The humidity data of Bluetooth accessory

bt[bt_index]_temp

The Temperature data of the Bluetooth accessory

bt[bt_index]_bat_level

The battery level of Bluetooth accessory

%
bt[bt_index]_alarm

The alarm type of the bluetooth accessory:

0: The voltage of the Bluetooth accessory is low

1: The temperature alarm: Current temperature value is below low temperature limit

2: The temperature alarm: Current temperature value is upper high temperature limit

3: The temperature alarm: Current temperature value is within the range defined by temperature limit

7: Humidity alarm: Current Humidity value is below low humidity limit

8: Humidity alarm: Current Humidity valueis upper high humidity limit

9: Humidity alarm: Current Humidity values is within the range defined by humidity limit

A: The available alarm: The connection status of Bluetooth accessory has changed

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*
Company*
Email*
Phone