Traceur GPS Queclink GV55W | Intégré à Wialon

Caractéristiques Queclink GV55W:

Boîte à mémoire

Afin d'identifier le boîtier Queclink GV55W les détails suivants sont à utiliser dans les réglages de l'unité sur Wialon :

Type du boîtier GPS:	Queclink GV55W
ID unique:	imei

Précisez les paramètres suivants dans le programme de configuration ou dans la configuration Queclink GV55W pour les utiliser dans Wialon Hosting :

Port du serveur:

22342

3860 unités Queclink GV55W connectées au le centre de données Wialon — Ça fait 0.16% de nombre total des boîtiers GPS connectés.

Le diagramme ci-dessous représente la dynamique des connexions dans le centre de données Wialon au cours des 30 derniers jours:

Nom du paramètre	Description	Unités
report_type	Report Type
rep_id	Report ID
rep_type	Report type (GT###)
mcc	Mobile country code
mnc	Mobile network code
lac	Location area code in hex format
cell_id	Cell ID in hex format
mileage	The current total mileage
hour_meter_count	Hour Meter Count	h
h_m_count	Hour Meter Count	h
battery	Backup Battery Percentage	%
ign	Ignition status
motion_state	Device status 16 (Tow): The device attached vehicle is ignition off and it is towed. 1A (Fake Tow): The device attached vehicle is ignition off and it might be towed. 11 (Ignition Off Rest): The device attached vehicle is ignition off and it is motionless. 12 (Ignition Off Motion): The device attached vehicle is ignition off and it is moving before it is treated as being towed. 21 (Ignition On Rest): The device attached vehicle is ignition on and it is motion less 22 (Ignition On Motion): The device attached vehicle is ignition on and it is moving 41 (Sensor Rest): The device attached vehicle is motionless without ignition signal detected 42 (Sensor Motion): The device attached vehicle is moving without ignition signal detected
pwr_ext	External Power Voltage
iccid	ICCID
csq_rssi	GSM signal level of the terminal
gsm	GSM signal level of the terminal
csq_ber	The quality of the GSM signal. The range is 0-7, 99 for unknown.
bat_status	Whether the external power supply is connected. 0: Not connected 1: Connected
charging	Whether the backup battery is charging when the main power supply is connected. 0: Not charging 1: Charging
led_on	Indicate whether the LED’s are turned on: 0: Off 1:On
din_status	A bitwise hex integer to represents the logical status of the digital input. From the lowest bit to the highest bit, each bit represents ignition detection and one of the digital inputs 1 respectively. For each bit, 0 means disable status, 1 means enable status.
dout_status	A bitwise hex integer to represents the logical status of the digital output. From the lowest bit to the highest bit, each bit represents one of the digital outputs 1 – 2 respectively. For each bit, 0 means disable status, 1 means enable status
time_zone	The time offset of the local time zone to the UTC time.	m
daylight_saving	The current setting of the daylight saving. 0: Daylight saving is disabled 1: Daylight saving is enabled
data_type	The data reported to backend server is recorded before or after crash. 0: before crash. 1: after crash.
frames_count	Total number of messages that are sent to the bckend server for the crash event.
frame	A numeric to indicate the sequence of the current message.
x_axis#	X axis acceleration data
y_axis#	Y axis acceleration data
z_axis#	Z axis acceleration data
ign_off_duration	Duration of Ignition Off	s
ign_on_duration	Duration of Ignition On	s
state	The current motion state when the vehicle leaves idling status.
idle_dt	The time that the vehicle has been in idling status.	s
gps_signal_status	GPS Signal Status: 0 means lost GPS signal or no successful GPS fix, 1 means GPS signal recovered and successful GPS fix.
sats	Satellite Number
wave1_out_id	ID of the output With wave shape 1
wave1_out_active	The output status with wave shape 1
roaming_state	Roam state : 0 Home 1 Known Roaming 2 Unknow Roaming 3 Blocking Report
jamming_status	The current Jamming status of the device. 1: Quit the jamming. 2: Enter the jamming.
jamming_cw	Continuous wave(narrowband) jamming detection threshold	dB
jamming_gps	Broadband jamming detection threshold	dB
is_pwr_ext	External Power Supply
mcu_ver	MCU Version
hw_ver	Hardware Version
fw_ver	Firmware Version

Nom du paramètre

Description

Unités

report_type

Report Type

rep_id

Report ID

rep_type

Report type (GT###)

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code in hex format

cell_id

Cell ID in hex format

mileage

The current total mileage

hour_meter_count

Hour Meter Count

h_m_count

Hour Meter Count

battery

Backup Battery Percentage

ign

Ignition status

motion_state

Device status

16 (Tow): The device attached vehicle is ignition off and it is towed.
1A (Fake Tow): The device attached vehicle is ignition off and it might be towed.
11 (Ignition Off Rest): The device attached vehicle is ignition off and it is motionless.
12 (Ignition Off Motion): The device attached vehicle is ignition off and it is moving before it is treated as being towed.
21 (Ignition On Rest): The device attached vehicle is ignition on and it is motion less
22 (Ignition On Motion): The device attached vehicle is ignition on and it is moving
41 (Sensor Rest): The device attached vehicle is motionless without ignition signal detected
42 (Sensor Motion): The device attached vehicle is moving without ignition signal detected

pwr_ext

External Power Voltage

iccid

ICCID

csq_rssi

GSM signal level of the terminal

gsm

GSM signal level of the terminal

csq_ber

The quality of the GSM signal. The range is 0-7, 99 for unknown.

bat_status

Whether the external power supply is connected.

0: Not connected
1: Connected

charging

Whether the backup battery is charging when the main power supply is connected.

0: Not charging
1: Charging

led_on

Indicate whether the LED’s are turned on:

0: Off
1:On

din_status

A bitwise hex integer to represents the logical status of the digital input. From the lowest bit to the highest bit, each bit represents ignition detection and one of the digital inputs 1 respectively. For each bit, 0 means disable status, 1 means enable status.

dout_status

A bitwise hex integer to represents the logical status of the digital output. From the lowest bit to the highest bit, each bit represents one of the digital outputs 1 – 2 respectively. For each bit, 0 means disable status, 1 means enable status

time_zone

The time offset of the local time zone to the UTC time.

daylight_saving

The current setting of the daylight saving.