Cat 1E

Cat 1E
Manufacturer: C2STEK
Forum Discussion

Number of units

Supported in Wialon:
  • ADC sensors
  • Digital sensors
  • LBS
  • Communication via TCP

The following data should also be added to Cat 1E unit properties section of Wialon GPS tracking software :

Device type: Cat 1E
Unique ID: imei

Specify the following parameters in configuration software or configuration Cat 1E for use in Wialon Hosting :

Server port: 21344

0 units of Cat 1E device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
gsm GSM signal strength level
model Model Name
version Version
veh_id Vehicle ID
valid 1 if the device captures GPS, 0 otherwise
mcc Mobile country code
mnc Mobile network code
lac Location area code
cell_id Cell ID
pwr_ext Power supply voltage V
pwr_int Battery voltage V
area_status Area Status:
sys_status System Status:
code RFID code/iButton code
sens_d_N sensor value; d means voltage sensor, N - sensor ID
sens_u_N sensor value; u means ultrasonic sensor, N - sensor ID
sens_u_alarm_N sensor alarm code; u means ultrasonic sensor, N - sensor ID
onewire_t_N onewire temperature, N - sensor ID
onewire_alarm_N onewire alarm code, N - sensor ID
acc_x acceleration on X axis
acc_y acceleration on Y axis
acc_z acceleration on Z axis

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*