Mobilogix MT2000

Mobilogix MT2000
Manufacturer: Mobilogix
Forum Discussion

Number of units

21
Online
66
Total
Features Mobilogix MT2000:
  • 2G
  • Blackbox

The following data should also be added to Mobilogix MT2000 unit properties section of Wialon GPS tracking software :

Device type: Mobilogix MT2000
Unique ID: custom

Specify the following parameters in configuration software or configuration Mobilogix MT2000 for use in Wialon Hosting :

Server port: 22114

66 units of Mobilogix MT2000 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
msisdn It is a number that uniquely identifies a subscription in a Global Mobile Communications System.
pass Device access password.
imsi The international mobile subscriber identity (IMSI), is a number that uniquely identifies every user of a cellular network (associated with SIM-CARD).
mess_type Type of message.
rep_type

1 = Report is real time from MT2000
0 = Report from buffer

prt_ver Protocol version
term_s_n Terminal serial number
term_stat

Terminal Status representing a set of status bits as follows:
Bit0: 1 = Output Disabled, 0 = Output Enabled;
Bit1: 0 = DisConnected external battery, 1 = Connected external battery;
Bit2: 0 = Without TRIP, 1 = Under TRIP;
Bit3: 0 = Stationary (parked), 1 = Moving;
Bit4: 0 = Outside geofence, 1 = Inside geofence;
Bit5: 0 = ACC off, 1 = ACC on;
Bit6: 0 = Undue movement, 1 = Allowed movement;
Bit7: 0 = Operation Mode, 1 = Standby Mode.

pwr_ext External battery voltage V
gsm_strength GSM Signal strength
gps_fix

GPS fix:
0 = No fix, lat and long fieldsare empty;
1 = Current GPS fix, lat and long fieldsare Current GPS fix;

pwr_int Internal battery voltage V
odometer_trip Partial milage accumulator
param_name Parameter name
param_ack

ACK = 1: Command received and accepted successfully;
ACK = 0: Command received and was not accepted (failed).

param_val

Parameter: The same parameter used in the message tables for S5 and S6;
Value: The value is delivered in the same way as it was configured in S6 (same format, type of field and range).

fota_stat

ACK from FOTA process:
1: All is OK, and the FOTA process is successfully;
0: Something is wrong.

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone