Omnicomm Profi

Omnicomm Profi
Manufacturer: Omnicomm
Forum Discussion

Number of units

Features Omnicomm Profi:
  • Blackbox
  • Dual SIM
  • GLONASS support
  • Sending data to multiple servers
  • Built-in odometer
  • Voice calls
Supported in Wialon:
  • ADC sensors
  • CAN-bus support
  • Driver identification
  • Digital sensors
  • MobilEye support
  • Remote management via SMS
  • Communication via TCP

The following data should also be added to Omnicomm Profi unit properties section of Wialon GPS tracking software :

Device type: Omnicomm Profi
Unique ID: serial

Specify the following parameters in configuration software or configuration Omnicomm Profi for use in Wialon Hosting :

Server port: 20617

2741 units of Omnicomm Profi device type are connected to Wialon Data Center. This represents 0.12% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
amtr_x Acceleration along the X-axis g/100
amtr_y Acceleration along the Y-axis g/100
amtr_z Acceleration along the Z-axis g/100
battery Battery level %
cllsN Fuel sensor level

Bit number





0 – off,

1 – on.


GSM connection

0 – off,

1 – on.


GPS data

0 – invalid,

1 – valid.



0 – home network,

1 – roaming.


Power supply

0 – external power supply,

1 – standby power supply.


SOS button

(current state)

0 – off,

1 – on.


Tamper alert

0 – off,

1 – on.


discrete input state

0 – off,

1 – on.

fllsN Fuel sensor state: 0 - off, 1 - not ready, 2 - ready, 3 - error
id_fas The ID of the onboard equipment
mid Event ID
mileage Mileage m
pwr_ext External power V
spnN CAN bus data See FMS standard
sum_acc g
timp Engine RPM sensor value rpm
tllsN Fuel sensor temperature °C
vimp Speed sensor value km/h

MobilEye status (bitfield by CAN 700):
1bit - Peds FCW
2bit - Peds in DZ
3bit - Headway valid
4bit - TSR
5bit - LDW

me_time_indicator ME5 Time indicator
me_time_sound_type ME5 Sound type
me_time_zero_speed ME5 Zero Speed
me_headway_measure ME5 Headway measure
me_error_code ME5 Error code

ME5 parameters:
1 bit - LDW OFF
2 bit - Left LDW ON
3 bit - Right LDW ON
4 bit - FCW on
7 bit - Maintence
8 bit - Failsafe


ME5 parameters:
2 bit - Peds FCW
3 bit - Peds DZ
6 bit - Tamper Alert
8 bit - TSR enabled


ME5 TSR Warning Level:
When Speed <= road speed , TSR Warning level= 0
When Speed > road speed +[0-5kmh], TSR Warning level= 1
When Speed > road speed +[5-10kmh], TSR Warning level= 2
When Speed > road speed +[10-15kmh], TSR Warning level= 3
When Speed > road speed +[15-20kmh], TSR Warning level= 4
When Speed > road speed +[20-25kmh], TSR Warning level= 5
When Speed > road speed +[25-30kmh], TSR Warning level= 6
When Speed > road speed +[30-35kmh], TSR Warning level= 7
When Speed > road speed +35, TSR Warning level= 8

me_hw_repeat_enabled ME5 HW repeatable enabled
me_hw_warn_level ME5 Headway Warning Level
me_sign_typeN ME5 Sign Type from Display N
me_supplem_sign_typeN ME5 Supplementary Sign Type from Display N

ME5 parameters:
1 bit - Brakes
2 bit - Left Signal
3 bit - Right Signal
4 bit - Wipers
5 bit - Low Beam
6 bit - High Beam


ME5 parameters:
4 bit - Wipers Available
5 bit - Low Beam Available
6 bit - High Beam Available
8 bit - Speed Available

me_speed ME5 Speed km/h
cmd Type of packet.
avl_driver1 Copy of avl_driver.
icon_v_st iCON: Vehicle Status
icon_v_st_id iCON: Vehicle Status ID
icon_v_st_gr_id iCON: Vehicle Status Group ID
icon_msg_id iCON: Msg ID
icon_msg_stat iCON: Msg Status
icon_st_date iCON: Stat Date
icon_v_st_prev iCON: Vehicle Status Prev
icon_v_st_flg iCON: Vehicle Status Flags

OMNICOMM’s most feature-packed terminal is built for medium and heavy trucks operating in complex projects and in highly demanding situations. It has an IP54 protection rating and comes in two versions, one with WiFi for areas without GSM coverage.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*