Vitana VIT4100

Vitana VIT4100
Manufacturer: Vitana
Forum Discussion

Number of units

4
Online
31
Total
Features Vitana VIT4100:
  • 2G
  • 4G/LTE
  • Blackbox
  • Built-in odometer
Supported in Wialon:
  • ADC sensors
  • Remote management via GPRS
  • Remote management via SMS
  • Communication via TCP

The following data should also be added to Vitana VIT4100 unit properties section of Wialon GPS tracking software :

Device type: Vitana VIT4100
Unique ID: custom

Specify the following parameters in configuration software or configuration Vitana VIT4100 for use in Wialon Hosting :

Server port: 22574

31 units of Vitana VIT4100 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
alm_code

Event code of the alarm (for more information see protocol description).

fix_flag

GPS Location status indicator, A = valid, V = invalid.

alm_data

Additional description of alarm events (for more information see protocol description).

hdop

Horizontal positioning accuracy, the smaller the value, the more accurate the accuracy.

odometer

The accumulated total mileage, in meters, in decimal format.

csq

GSM signal value, 0-31, decimal format.

sys_sta

The working status of tracker, in 8-bit hexadecimal format, each bit represents a working status:

  • Bit0: GPRS connection status of IP1, 1=connected, 0=disconnected;
  • Bit1: GPRS connection status of IP2, 1=connected, 0=disconnected;
  • Bit2: GPS positioning status, 1=valid, 0=invalid;
  • Bit3: External power connection status, 1=connected, 0=disconnected;
  • Bit4: GPS antenna connection status, 1=connected, 0=disconnected;
  • Bit5: Stop status, 1=stop, 0=move;
  • Bit6: Armed state, 1=armed, 0=disarmed;
  • Bit7: RFID/iButton login status, 1=log in, 0=log out ;
  • Bit8~bit31: reserved.

pro_code

Extended protocol version number to distinguish different extended protocol functions. Decimal format.

cmd

GPRS command data type flag:

  • 000 is a normal data from tracker to server, and the platform does not need to reply to receive confirmation;
  • 010 is a normal data from tracker to server, which requires the platform to reply to the receipt confirmation;
  • 020 is a compressed data package from tracker to server, which requires the platform to reply and confirm receipt.

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*
Company*
Email*
Phone