KVL 200

KVL 200
Forum Discussion

Number of units

Supported in Wialon:
  • ADC sensors

The following data should also be added to KVL 200 unit properties section of Wialon GPS tracking software :

Device type: KVL 200
Unique ID: imei

Specify the following parameters in configuration software or configuration KVL 200 for use in Wialon Hosting :

Server port: 21728

0 units of KVL 200 device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
result Result of command
gps_valid Validity of GPS
dop dop
event_code Event code

Non-configurable 1bit flags (bits start with 1)
Bit1: GPS_ALIVE (1:Alive 0:Not Alive),
Bit2: GSM_ALIVE (1:Alive 0:Not Alive),
Bit3:GSM_SIMCARD (1:Exist 0:Not Exist),
Bit4: GSM_REG (1:Registered 0:Not Registered),
Bit5: FLASHCHIP_ALIVE (1:Alive 0:Not Alive),
Bit6: GPRS_Connect (1:Connect 0:Not Connect),
Bit7: GPS_Validity (1:Valid 0:Not Valid)

nc_max_snr Max snr
nc_pwr_int Power internal
nc_pwr_ext Power external
nc_1b_# Non-configurable 1byte data, # - number
nc_2b_# Non-configurable 2byte data, # - number
nc_4b_# Non-configurable 4byte data, # - number
nc_8b_# Non-configurable 8byte data, # - number
c_1b_# Configurable 1byte data, # - number
c_2b_# Configurable 2byte data, # - number
c_4b_# Configurable 4byte data, # - number
c_8b_# Configurable 8byte data, # - number
c_1wire_# 1wire data, # - number
c_adc_# Analog input, # - number

Configurable 1bit flags (bits start with 1)
Bit1: Pin5 (Engine),
Bit2: Pin6,
Bit3: Pin3

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First and last name*