Forum Discussion

Number of units

Supported in Wialon:
  • SMS sending of data
  • Communication via TCP

The following data should also be added to TLT-2H unit properties section of Wialon GPS tracking software :

Device type: TLT-2H
Unique ID: serial

Specify the following parameters in configuration software or configuration TLT-2H for use in Wialon Hosting :

Server port: 20208

9 units of TLT-2H device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units

unit state:
ACC OS - Move alarm. The car engine is Close the car is moving.
ACC RS - Move alarm. The car engine is Close the car is move back.
ANSWER - Somebody call the tracker, and answer.
AUTO - Position information in fixed time and the ACC is ON, engine is Open.
ATUO START - The engine is Open, ACC is ON.
AUTO STOP - The engine is Close, ACC is OFF.
AUTOLOW - The engine is Close, ACC is OFF.
CALL - Somebody call the tracker, and no answer.
DEF - Cut the power wire.
LP - The power low.
OVER SPEED - The tracker speed over the set.
SOS - Press SOS button.
STORAGE - Upload the location data in the tracker.

You can also download an example of object configuration file for TLT-2H to be used in Wialon GPS tracking software. When creating an object, import this configuration file by selecting "Import from File" option. This way you will create a pre-configured object with some sensors. Do not forget to specify the unique Id of Your device.

More devices from the manufacturer

Contact Wialon and achieve the most ambitious goals with telematics

Fill out a request form to get started with Wialon

Step 1
Step 2
Step 3
First name*
Last name*