Queclink GL502MG

Queclink GL502MG
Forum Discussion

Número de unidades

0
ON-LINE
6
TOTAL

The following data should also be added to Queclink GL502MG unit properties section of Wialon GPS tracking software :

Device type: Queclink GL502MG
ID único: imei

Specify the following parameters in configuration software or configuration Queclink GL502MG for use in Wialon Hosting :

Porta do servidor: 22592

6 units of Queclink GL502MG device type are connected to Wialon Data Center. This represents 0% of all AVL Hardware connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name Description Units
battery

Current volume of the battery

%
active_mode

Current mode of the device:

0: Power saving mode

1: Continuous nide

movement_status

the movement status of the device

0: Stillness

1: Motion

temp_int

The real time temperature value of the terminal

°С
evt_state1

The light sensor tamper state

0: Normal state

1: Tamper alarm state

iccid

The ICCID of the installed SIM card

csq_rssi

The network signal strength leveel

csq_ber

The quality of the network signal

bt[bt_index]_mask

Bitwise mask to configue which data item is reported

bit 0: Bluetooth accessory name

bit 1: Bluetooth accessory MAC

bit 2: Bluetooth accessory connection status: 1 - connected | 0 - disconnected

bit 3: Bluetooth accessory battery voltage

bit 4: Bluetooth accessory temperature

bit 5: Bluetooth accessory humidity

bt_num

The number of bluetooth accessory. If it is 0, the accessory
details
fields from bt_index to bt[bt_index]_hum will not display. I

bt_index

The index of bluetooth accessory. Takes values 0-9

bt[bt_index]_type

The type of the bluetooth accessory. Possible types:

0: No Bluetooth accessory.
6: Beacon temperature/humidity sensor.


bt[bt_index]_raw_data

The data is read from Bluetooth accessory

bt[bt_index]_hum

The humidity data of Bluetooth accessory

bt[bt_index]_temp

The Temperature data of the Bluetooth accessory

bt[bt_index]_bat_level

The battery level of Bluetooth accessory

%
bt[bt_index]_alarm

The alarm type of the bluetooth accessory:

0: The voltage of the Bluetooth accessory is low

1: The temperature alarm: Current temperature value is below low temperature limit

2: The temperature alarm: Current temperature value is upper high temperature limit

3: The temperature alarm: Current temperature value is within the range defined by temperature limit

7: Humidity alarm: Current Humidity value is below low humidity limit

8: Humidity alarm: Current Humidity valueis upper high humidity limit

9: Humidity alarm: Current Humidity values is within the range defined by humidity limit

A: The available alarm: The connection status of Bluetooth accessory has changed

More devices from the manufacturer

Entre em contato com a Gurtam e alcance seus mais ambiciosos objetivos através da telemática

Preencha um formulário de solicitação para começar

PASSO 1
PASSO 2
PASSO 3
Primeiro nome*
Sobrenome*
Empresa*
E-mail*
Telefone