Asset GPS tracker Micron AT Pro | Integrated with Wialon

Features Micron AT Pro:

4G/LTE
Blackbox
BLE enabled
Wi-Fi positioning

The following data should also be added to Micron AT Pro unit properties section of Wialon GPS tracking software :

Device type:	Micron AT Pro
Unique ID:	imei

Specify the following parameters in configuration software or configuration Micron AT Pro for use in Wialon Hosting :

Server port:

22130

4 units of Micron AT Pro device type are connected to Wialon Data Center. This represents 0% of all Asset trackers connected.

Below chart represents the dynamic of connections in the last 30 days:

Parameter name	Description	Units
gps_acc	GPS accuracy
battery	The current volume of the backup battery	%
report_type	Type of report: Type of the report: FRI - Fixed Report Information GEO - Geo-Fence Information SPD - Speed Alarm SOS - SOS report RTO - Real Time Operation PNL - The first location after the device powers on NMR - Non movement is detected by motion sensor DIS - The status of digital input is detected being changed HIS - History report INF - Device Information Report WIF - WLAN Information Report GPS - The report for real time operation GPS CID - The report for real time operation CID CSQ - The report for real time operation CSQ VER - The report for real time operation VER PNA - Power on report PFA - Power off report EPN - The report for connecting external power supply EPF - The report for disconnecting external power supply BPL - Battery low report BTC - Start charging report STC - Stop charging report STT - Device motion state indication PDP - Mobile Data Service PDP connect report SWG - Switch on or off Geo-Fence 0 via function key GSM - The report for the information of the service cell and the neighbor cells. GSI - G-sensor Information Report BLE(O) - report the beacon infomation BLER - report ble raw data report
inputN	The current logical status of the input port number N: 0 - is disable status 1 - is enable status
call_number	The phone number of the incoming call which initiates this report
power_percent	The current volume of the backup battery	%
iccid	The ICCID of the SIM card
temp	The temperature of the Device	°C
lightness	The lightness level
pwr_int	The voltage of the battery	V
csq_rssi	The GSM signal strength level. The range is 0-31, 99 for unknown
csq_ber	The quality of the GSM signal. The range is 0-7, 99 for unknown
dev_type	The type of device
soft_ver	The software version
hard_ver	The hardware version
is_pwr_ext	Whether the external power supply is connected. 0 - not connected 1 - connected
charging	Whether the backup battery is charging when the main power supply is connected. 0 - not charging 1 - charging
led_on	Indicate whether the LED’s are turned on
backup_baterry	The voltage of the battery	V
motion_state	The current motion state of device: 21 - The device attached vehicle is ignition on and motionless 22 - The device attached vehicle is ignition on and moving. 41 - The device is motionless without ignition on 42 - The device is moving without ignition on
motion_state_chg	The state of the device changed: 0 - from motion to rest; 1 - from rest to motion.
light_state	The lightness state: 0: Report after the GPS fixing finished of timeout. 1: Lightness is greater than the bright threshold (Device from dark place to light place). 2: Lightness is less than the dark threshold (Device from light place to dark place).
mcc	Mobile country code
mnc	Mobile network code
lac	Location area code
cell_id	Cell ID
ext_pow_sup	Whether the external power supply is connected: 0 - Not connected 1 - Connected
gps_on_need	GPS on need
ext_gps_ant	GPS antenna type
ble_mac_#	Ble mac addr #
ble_raw_#	Bluetooth RAW data #
ble_num	Number of IBEACON
ble_uuid_#	The UUID field in IBEACON broadcast
ble_major_#	Ble ibeacon info
ble_minor_#	Ble ibeacon info
ble_rssi_#	Ble receive signal	dBm

Parameter name

Description

Units

gps_acc

GPS accuracy

battery

The current volume of the backup battery

report_type

Type of report:
Type of the report:
FRI - Fixed Report Information
GEO - Geo-Fence Information
SPD - Speed Alarm
SOS - SOS report
RTO - Real Time Operation
PNL - The first location after the device powers on
NMR - Non movement is detected by motion sensor
DIS - The status of digital input is detected being changed
HIS - History report
INF - Device Information Report
WIF - WLAN Information Report
GPS - The report for real time operation GPS
CID - The report for real time operation CID
CSQ - The report for real time operation CSQ
VER - The report for real time operation VER
PNA - Power on report
PFA - Power off report
EPN - The report for connecting external power supply
EPF - The report for disconnecting external power supply
BPL - Battery low report
BTC - Start charging report
STC - Stop charging report
STT - Device motion state indication
PDP - Mobile Data Service PDP connect report
SWG - Switch on or off Geo-Fence 0 via function key
GSM - The report for the information of the service cell and the neighbor cells.
GSI - G-sensor Information Report
BLE(O) - report the beacon infomation
BLER - report ble raw data report

inputN

The current logical status of the input port number N:
0 - is disable status
1 - is enable status

call_number

The phone number of the incoming call which initiates this report

power_percent

The current volume of the backup battery

iccid

The ICCID of the SIM card

temp

The temperature of the Device

°C

lightness

The lightness level

pwr_int

The voltage of the battery

csq_rssi

The GSM signal strength level. The range is 0-31, 99 for unknown

csq_ber

The quality of the GSM signal. The range is 0-7, 99 for unknown

dev_type

The type of device

soft_ver

The software version

hard_ver

The hardware version

is_pwr_ext

Whether the external power supply is connected.
0 - not connected
1 - connected

charging

Whether the backup battery is charging when the main power supply is connected.
0 - not charging
1 - charging

led_on

Indicate whether the LED’s are turned on

backup_baterry

The voltage of the battery

motion_state

The current motion state of device:
21 - The device attached vehicle is ignition on and motionless
22 - The device attached vehicle is ignition on and moving.
41 - The device is motionless without ignition on
42 - The device is moving without ignition on

motion_state_chg

The state of the device changed:
0 - from motion to rest;
1 - from rest to motion.

light_state

The lightness state:
0: Report after the GPS fixing finished of timeout.
1: Lightness is greater than the bright threshold (Device from dark place to light place).
2: Lightness is less than the dark threshold (Device from light place to dark place).

mcc

Mobile country code

mnc

Mobile network code

lac

Location area code

cell_id

Cell ID

ext_pow_sup

Whether the external power supply is connected:
0 - Not connected
1 - Connected

gps_on_need

GPS on need